AGCO lawn tractors 2020LC lawn tractor

AGCO lawn tractors 2020LC

Power

20 hp

Production

1999-2003

Engine

Gasoline, 2-cylinder

Transmission

Sundstrand 15U

Weight

822 lbs [372 kg]

Drive

2WD

From the same series:

2020H
2023H

Introduction

Production Information of AGCO lawn tractors, 2020LC

The production information of the tractor (2020LC) includes details about its manufacturing.

Built in Port Washington, Wisconsin, USA
Garden tractor
DistributorAGCO
Original price$8,650 (1998 )
ManufacturerSimplicity
$10,300 (2001 )

Dimension and Tires Information of AGCO lawn tractors, 2020LC

This section sums up the dimension and tires information of the tractor.

Max rear axle1800 lbs [816 kg]
Wheelbase55 inches [139 cm]
Height (ROPS)76.5 inches [194 cm]
Height (steering wheel)51 inches [129 cm]
Length78.75 inches [200 cm]
Ground clearance8 inches [20 cm]
Weight822 lbs [372 kg]
Width44.75 inches [113 cm]
Rear axle1.1875 inch diameter [30 mm]
Lawn/turf front18x8.5-8
Lawn/turf rear26x12-12

Engine Specifications of AGCO lawn tractors, 2020LC

Get the specifications for the engine and if different options are available.

Kawasaki FD620
Liquid-cooled horizontal-shaft V-Twin
Gasoline
2-cylinder
Oil capacity1.6 qts [1.5 L]
Displacement617 cc [37.65 ci]
Compression9:1
Bore/Stroke2.99x2.66 inches [76 x 68 mm]
Coolant capacity2.85 qts [2.7 L]
Starter volts12
StarterElectric
Power (gross)20 hp [14.9 kW]

Transmission Information of AGCO lawn tractors, 2020LCY

Discover all variants of transmission available for this tractor model.

Transmission variants 1

Sundstrand 15 hydrostatic with Peerless 2600 transaxle.
Oil change400 h
TransmissionSundstrand 15U
Oil typeATF F
Oil capacity6 qts [5.7 L]
TypeShaft-driven hydrostatic
ATF F
GearsInfinite forward and reverse (2-range)

Mechanical Specs of AGCO lawn tractors, 2020LCY

This section summarizes all mechanical information such as the brake system and other specifications.

Two-wheel drive
Disc brakes
Power steering
Open operator station. Hard-side weather cab optional. Two-post ROPS available.
Final drivesSpur gear
Differential lockMechanical rear

Power Information of AGCO lawn tractors, 2020LCY

Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.

Rear PTOIndependent OptOptional
Front PTOIndependent
2000 (1.0)
ClutchElectric
ClutchElectro-magnetic
Rear PTO Type540 (1.375)

Hydraulics Specifications of AGCO lawn tractors, 2020LC

Hydraulic system type, pressure, pump flow and valves.

Pressure950 psi [65.5 bar]
Pump flow3 gpm [11.4 lpm]

Three-Point Hitch of AGCO lawn tractors, 2020LC

Hitch category and rear/front lift capacity.

Rear Type0 OptOptional
Rear lift450 lbs [204 kg]

Electrical System of AGCO lawn tractors, 2020LC

Battery voltage, charging system and ground.

GroundNegative
Battery volts12
Battery CCA500
Charging systemAlternator
Charging amps20

Frequently asked questions

How much horsepower does the AGCO lawn tractors 2020LC have?

The AGCO lawn tractors 2020LC delivers 20 HP.

What years was the AGCO lawn tractors 2020LC produced?

The AGCO lawn tractors 2020LC was produced in 1999-2003.

What engine does the AGCO lawn tractors 2020LC have?

The AGCO lawn tractors 2020LC is powered by a Gasoline, 2-cylinder engine.

What transmission does the AGCO lawn tractors 2020LC use?

The AGCO lawn tractors 2020LC uses a Sundstrand 15U transmission.

How much does the AGCO lawn tractors 2020LC weigh?

The AGCO lawn tractors 2020LC weighs 822 lbs [372 kg].

Is the AGCO lawn tractors 2020LC 4WD?

The AGCO lawn tractors 2020LC is available in 2WD.

Compare the AGCO lawn tractors 2020LC with another model