Ford 75
Power
7 hp
Production
1968-1973
Engine
Gasoline, 1-cylinder
Transmission
Belt-driven gear
Weight
427 lbs [193 kg]
Drive
2WD
From the same series:
Introduction
Jacobsen 75 Lawn Tractor
The Jacobsen 75 is a compact lawn tractor produced between 1968 and 1973. Manufactured by Jacobsen and distributed under the Ford brand, this machine was designed primarily for residential lawn maintenance and property care during the late 1960s and early 1970s.
Engine and Powertrain
The tractor is powered by a Briggs & Stratton 170707 1-cylinder gasoline engine. This air-cooled, vertical-shaft engine provides a gross power output of 7 hp (5.2 kW) at a rated speed of 3600 RPM. With a displacement of 275 cc, the engine is suited for light-duty mowing tasks. The power is delivered to the ground via a belt-driven gear transmission, which offers a configuration of three forward gears and one reverse gear.
Mechanical and Operational Design
Built on a two-wheel drive chassis, the Jacobsen 75 utilizes manual steering for direct control. The operator station is of the open type, prioritizing accessibility and simplicity. The machine weighs 193 kg (427 lbs) and features a wheelbase of 106 cm (42 inches), contributing to its overall maneuverability in landscaped areas. It is equipped with turf-specific tires, utilizing 13x5.00-6 dimensions on the front and 18x8.50-8 on the rear to minimize surface damage.
Mowing and Electrical Systems
The primary implement for this tractor is a 34-inch mower deck, designed for efficient grass cutting. Electrical requirements are met by a 12-volt battery system with a negative ground. The unit includes an alternator-based charging system to maintain the battery during operation. Routine maintenance of the engine requires 0.7 liters of oil, and the intake system utilizes a dry-type air cleaner.
Conclusion
The Jacobsen 75 represents a standard, functional approach to small-scale lawn maintenance equipment from its era. Its combination of a 7 hp engine, compact dimensions, and a 34-inch cutting deck makes it a suitable machine for property owners requiring basic mowing capabilities and reliable mechanical operation.
Production Information of Ford, 75
- Lawn tractor
| Distributor | Ford |
|---|---|
| Manufacturer | Jacobsen |
Dimension and Tires Information of Ford, 75
| Wheelbase | 42 inches [106 cm] |
|---|---|
| Weight | 427 lbs [193 kg] |
| Height (steering wheel) | 37 inches [93 cm] |
| Length | 58 inches [147 cm] |
| Width | 32 inches [81 cm] |
| Lawn/turf front | 13x5.00-6 |
|---|---|
| Lawn/turf rear | 18x8.50-8 |
Engine Specifications of Ford, 75
- Briggs & Stratton 170707
- Air-cooled vertical-shaft
- Gasoline
- 1-cylinder
| Oil capacity | 0.75 qts [0.7 L] |
|---|---|
| Displacement | 275 cc [16.79 ci] |
| Air cleaner | Dry |
| Bore/Stroke | 3.00x2.375 inches [76 x 60 mm] |
| Starter volts | 12 |
| Rated RPM | 3600 |
| Power (gross) | 7 hp [5.2 kW] |
Transmission Information of Ford, 75
Transmission variants 1
| Type | Belt-driven gear |
|---|---|
| Gears | 3 forward and 1 reverse |
Mechanical Specs of Ford, 75
- Two-wheel drive
- Manual steering
- Open operator station.
Electrical System of Ford, 75
| Ground | Negative |
|---|---|
| Charging system | Alternator |
| Battery volts | 12 |
Where it sits
With 7 HP, the Ford 75 sits just below 85 (8 HP) in Ford's range. Its power puts it in the 66th percentile of 1960s models in our database (550 machines).
Frequently asked questions
How much horsepower does the Ford 75 have?
The Ford 75 delivers 7 HP.
What years was the Ford 75 produced?
The Ford 75 was produced in 1968-1973.
What engine does the Ford 75 have?
The Ford 75 is powered by a Gasoline, 1-cylinder engine.
What transmission does the Ford 75 use?
The Ford 75 uses a Belt-driven gear transmission.
How much does the Ford 75 weigh?
The Ford 75 weighs 427 lbs [193 kg].
Is the Ford 75 4WD?
The Ford 75 is available in 2WD.