Ford LT-80
Power
8 hp
Production
1977-1981
Engine
Gasoline, 1-cylinder
Transmission
Belt-driven gear
Weight
430 lbs [195 kg]
Drive
2WD
From the same series:
Introduction
Jacobsen LT-80 Lawn Tractor
The Jacobsen LT-80 is a lawn tractor produced between 1977 and 1981, designed for residential lawn maintenance. Distributed by Ford, this machine represents a compact, entry-level utility vehicle from the late 1970s era.
Engine and Performance
The tractor is powered by a single-cylinder, air-cooled Briggs & Stratton 191707 gasoline engine. It features a vertical-shaft configuration with a displacement of 318 cc (19.44 ci). The engine produces a gross power output of 8 hp (6.0 kW) at a rated engine speed of 3600 RPM.
Transmission and Drivetrain
The LT-80 utilizes a two-wheel drive system paired with a belt-driven gear transmission. The operator has access to three forward gears and one reverse gear. The system is engaged via a mechanical pulley clutch, providing straightforward manual control over the tractor's movement.
Power Take-Off and Mowing
The machine is equipped with an independent mid-mounted Power Take-Off (PTO). This system uses a pulley-driven mechanism operated by a manual clutch, which is designed to drive the included 34-inch mower deck for grass cutting operations.
Dimensions and Chassis
Built on a compact frame, the tractor features a 42-inch wheelbase and an overall width of 37 inches (93 cm). It has an open operator station and uses manual steering. The unit weighs approximately 430 lbs (195 kg) and is supported by 13x5.00 front and 18x8.50-8 rear lawn/turf tires, providing stability on established grass surfaces.
Conclusion
The Jacobsen LT-80 is a lightweight, maneuverable lawn tractor suited for basic grass cutting and property maintenance tasks. Its simple mechanical design and modest 8 hp power output position it as a functional solution for homeowners requiring a basic mowing platform.
Production Information of Ford, LT-80
- Lawn tractor
| Distributor | Ford |
|---|---|
| Manufacturer | Jacobsen |
Dimension and Tires Information of Ford, LT-80
| Clearance (rear axle) | 5.5 inches [13 cm] |
|---|---|
| Wheelbase | 42 inches [106 cm] |
| Weight | 430 lbs [195 kg] |
| Height | 32 inches [81 cm] |
| Length | 58 inches [147 cm] |
| Clearance (front axle) | 7 inches [17 cm] |
| Width | 37 inches [93 cm] |
| Lawn/turf front | 13x5.00 |
|---|---|
| Lawn/turf rear | 18x8.50-8 |
Engine Specifications of Ford, LT-80
- Briggs & Stratton 191707
- Air-cooled vertical-shaft
- Gasoline
- 1-cylinder
| Power (gross) | 8 hp [6.0 kW] |
|---|---|
| Displacement | 318 cc [19.44 ci] |
| Rated RPM | 3600 |
| Bore/Stroke | 3.00x2.75 inches [76 x 70 mm] |
| Starter volts | 12 |
Transmission Information of Ford, LT-80
Transmission variants 1
| Type | Belt-driven gear |
|---|---|
| Gears | 3 forward and 1 reverse |
| Clutch | Mechanical pulley |
Mechanical Specs of Ford, LT-80
- Two-wheel drive
- Manual steering
- Open operator station.
Power Information of Ford, LT-80
| Mid PTO | Independent |
|---|---|
| Clutch | Manual |
| Mid PTO Type | Pulley |
Electrical System of Ford, LT-80
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Battery AH | 22 |
Where it sits
With 8 HP, the Ford LT-80 sits just below LT-110 (11 HP) in Ford's range. Its power puts it in the 52th percentile of 1970s models in our database (1008 machines).
Frequently asked questions
How much horsepower does the Ford LT-80 have?
The Ford LT-80 delivers 8 HP.
What years was the Ford LT-80 produced?
The Ford LT-80 was produced in 1977-1981.
What engine does the Ford LT-80 have?
The Ford LT-80 is powered by a Gasoline, 1-cylinder engine.
What transmission does the Ford LT-80 use?
The Ford LT-80 uses a Belt-driven gear transmission.
How much does the Ford LT-80 weigh?
The Ford LT-80 weighs 430 lbs [195 kg].
Is the Ford LT-80 4WD?
The Ford LT-80 is available in 2WD.