Ingersoll lawn tractors 3010
Power
10 hp
Production
1989
Engine
Gasoline, 1-cylinder
Transmission
Hy-Drive
Weight
605 lbs [274 kg]
Introduction
Production Information of Ingersoll lawn tractors, 3010
The production information of the tractor (3010) includes details about its manufacturing.
| Garden tractor |
| Built in Winneconne, Wisconsin, USA |
| Manufacturer | Ingersoll |
|---|
Dimension and Tires Information of Ingersoll lawn tractors, 3010
This section sums up the dimension and tires information of the tractor.
| Clearance (rear axle) | 7.125 inches [18 cm] |
|---|---|
| Wheelbase | 46 inches [116 cm] |
| Height (hood) | 35.5 inches [90 cm] |
| Height (steering wheel) | 40 inches [101 cm] |
| Length | 65 inches [165 cm] |
| Front tread | 28.75 inches [73 cm] |
| Weight | 605 lbs [274 kg] |
| Width | 37 inches [93 cm] |
| Rear tread | 27.75 inches [70 cm] |
No data available
Engine Specifications of Ingersoll lawn tractors, 3010
Get the specifications for the engine and if different options are available.
| Kohler M10AQS |
| Air-cooled horizontal-shaft |
| 1-cylinder |
| Gasoline |
| Exhaust valve clearance | 0.018 inches (cold) [0.457 mm] |
|---|---|
| Intake valve clearance | 0.009 inches (cold) [0.229 mm] |
| Compression | 6.2:1 |
| Starter volts | 12 |
| Starter | Electric |
| Displacement | 391 cc [23.9 ci] |
| Power (gross) | 10 hp [7.5 kW] |
| Rated RPM | 3600 |
| Bore/Stroke | 3.25x2.875 inches [83 x 73 mm] |
| Sparkplug gap | 0.035 inches [0.889 mm] |
| Sparkplug | Champion RH10 |
| Oil capacity | 2 qts [1.9 L] |
Transmission Information of Ingersoll lawn tractors, 3010Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Transmission | Hy-Drive |
|---|---|
| Type | Hydraulic drive |
| Gears | Infinite forward and reverse (2-range) |
Mechanical Specs of Ingersoll lawn tractors, 3010Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Manual steering |
| Mechanical band brakes |
| Open operator station. |
Power Information of Ingersoll lawn tractors, 3010Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
No data available
Hydraulics Specifications of Ingersoll lawn tractors, 3010
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Valves | 2 |
| 575 psi (lift) [39.6 bar] | |
| Capacity | 1.5 gal [5.7 L] |
| Pump flow | 8 gpm [30.3 lpm] |
| Pressure | 2000 psi (transmission) [137.9 bar] |
Three-Point Hitch of Ingersoll lawn tractors, 3010
Hitch category and rear/front lift capacity.
| Rear Type | 0 OptOptional |
|---|---|
| Type | Sleeve hitch OptOptional |
Electrical System of Ingersoll lawn tractors, 3010
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Battery CCA | 230 |
| Charging system | Flywheel alternator |
| Battery AH | 32 |
| Charging amps | 15 |
Frequently asked questions
How much horsepower does the Ingersoll lawn tractors 3010 have?
The Ingersoll lawn tractors 3010 delivers 10 HP.
What years was the Ingersoll lawn tractors 3010 produced?
The Ingersoll lawn tractors 3010 was produced in 1989.
What engine does the Ingersoll lawn tractors 3010 have?
The Ingersoll lawn tractors 3010 is powered by a Gasoline, 1-cylinder engine.
What transmission does the Ingersoll lawn tractors 3010 use?
The Ingersoll lawn tractors 3010 uses a Hy-Drive transmission.
How much does the Ingersoll lawn tractors 3010 weigh?
The Ingersoll lawn tractors 3010 weighs 605 lbs [274 kg].