John Deere 130
Power
9 hp
Production
1986-1988
Engine
Gasoline, 1-cylinder
Transmission
Peerless 801-038A
Weight
415 lbs [188 kg]
Drive
2WD
From the same series:
Introduction
John Deere 130 Lawn Tractor
The John Deere 130 is a lawn tractor produced between 1986 and 1988 at the John Deere facility in Horicon, Wisconsin, USA. Designed for residential lawn maintenance, this model belongs to the 160 series and features a compact, two-wheel-drive configuration.
Engine and Performance
The tractor is powered by a Kawasaki FC290V engine, a single-cylinder, air-cooled gasoline unit with a displacement of 286 cc (17.5 ci). It produces 9 hp (6.7 kW) at a rated speed of 3350 RPM. The engine uses a vertical-shaft design, typical for lawn tractor applications.
Transmission and Drivetrain
The drivetrain utilizes a belt-driven gear transmission, specifically the Peerless 801-038A model. It offers 5 forward gears and 1 reverse gear, allowing for speed adjustment based on the terrain or task. The tractor is equipped with manual steering and disc brakes for operator control.
Power Take-Off and Mowing
This model features an independent mid-mounted Power Take-Off (PTO) system, engaged via an electric clutch. This setup is designed to operate the included 30-inch mower deck efficiently.
Electrical and Dimensions
The tractor runs on a 12-volt electrical system with a 225 CCA battery, supported by an alternator that provides 13 charging amps. Structurally, the unit has a wheelbase of 44.7 inches (113 cm) and weighs approximately 415 lbs (188 kg), ensuring a compact footprint for maneuvering in residential spaces.
Conclusion
The John Deere 130 is a straightforward, utility-focused lawn tractor suited for homeowners requiring a reliable machine for grass cutting. Its mechanical simplicity and compact dimensions make it an enduring choice for standard lawn maintenance tasks.
Production Information of John Deere, 130
- Lawn tractor
- Built in Horicon, Wisconsin, USA
| Manufacturer | John Deere |
|---|
Dimension and Tires Information of John Deere, 130
| Wheelbase | 44.7 inches [113 cm] |
|---|---|
| Weight | 415 lbs [188 kg] |
| Length | 65 inches [165 cm] |
| Height | 39.3 inches [99 cm] |
| Lawn/turf front | 13x5.00-6 |
|---|---|
| Lawn/turf rear | 18x6.50-8 |
Engine Specifications of John Deere, 130
- Kawasaki FC290V
- Air-cooled vertical-shaft
- Gasoline
- 1-cylinder
| Power | 9 hp [6.7 kW] |
|---|---|
| Displacement | 286 cc [17.5 ci] |
| Rated RPM | 3350 |
| Bore/Stroke | 3.07x2.36 inches [78 x 60 mm] |
| Oil capacity | 1.125 qts [1.1 L] |
| Starter volts | 12 |
Transmission Information of John Deere, 130
Transmission variants 1
| Transmission | Peerless 801-038A |
|---|---|
| Oil capacity | 1.1 qts [1.0 L] |
| Type | Belt-driven gear |
| Gears | 5 forward and 1 reverse |
Mechanical Specs of John Deere, 130
- Two-wheel drive
- Open operator station.
- Manual steering
- Disc brakes
Power Information of John Deere, 130
| Mid PTO | Independent |
|---|---|
| Clutch | Electric |
Electrical System of John Deere, 130
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Battery CCA | 225 |
| Charging system | Alternator |
| Battery Group | U1 |
| Charging amps | 13 |
Where it sits
With 9 HP, the John Deere 130 sits just below 160 (12 HP) in John Deere's range. Its power puts it in the 19th percentile of 1980s models in our database (977 machines).
Frequently asked questions
How much horsepower does the John Deere 130 have?
The John Deere 130 delivers 9 HP.
What years was the John Deere 130 produced?
The John Deere 130 was produced in 1986-1988.
What engine does the John Deere 130 have?
The John Deere 130 is powered by a Gasoline, 1-cylinder engine.
What transmission does the John Deere 130 use?
The John Deere 130 uses a Peerless 801-038A transmission.
How much does the John Deere 130 weigh?
The John Deere 130 weighs 415 lbs [188 kg].
Is the John Deere 130 4WD?
The John Deere 130 is available in 2WD.