John Deere 140
Power
12 hp
Production
1968-1974
Engine
Gasoline, 1-cylinder
Transmission
Sundstrand 15
Weight
730 lbs (140H1) [331 kg]
Drive
2WD
From the same series:
Introduction
Production Information of John Deere, 140
The production information of the tractor (140) includes details about its manufacturing.
| Garden tractor |
| The John Deere model 140 was built in two basic versions, the 140H1 and the 140H3. The H3 featured three hydraulic valves, providing the ability to operate multiple attachments. |
| Built in Horicon, Wisconsin, USA |
| Manufacturer | John Deere |
|---|---|
| $1,745 (1974 H3 ) | |
| Original price | $1,570 (1974 H1 ) |
Dimension and Tires Information of John Deere, 140
This section sums up the dimension and tires information of the tractor.
| Front tread | 31.25 inches [79 cm] |
|---|---|
| Wheelbase | 46 inches [116 cm] |
| Weight | 730 lbs (140H1) [331 kg] |
| Height (steering wheel) | 43 inches [109 cm] |
| Length | 67.5 inches [171 cm] |
| Rear tread | 29/34.5 inches [73/87 cm] |
| 770 lbs (140H3) [349 kg] | |
| Width | 38 inches*Minimum width. [96 cm] |
| Ag front | 4.80/4.00-8 |
|---|---|
| Lawn/turf rear | 23x8.50-12 |
| Ag rear | 23x8.50-12 |
| Lawn/turf front | 16x6.50-8 |
Engine Specifications of John Deere, 140
Get the specifications for the engine and if different options are available.
| Air-cooled horizontal-shaft |
| The 14-horsepower K321 engine was first used in 1969 models, serial number 10,001. |
| Gasoline |
| 1-cylinder |
| Intake valve clearance | 0.010 inches (cold) [0.254 mm] |
|---|---|
| Point gap | 0.020 inches [0.508 mm] |
| Power | 14 hp [10.4 kW] |
| Exhaust valve clearance | 0.020 inches (cold) [0.508 mm] |
| Rated RPM | 3600 |
| Idle RPM | 1500-3800 |
| Air cleaner | Dry |
| Bore/Stroke | 3.50x3.25 inches [89 x 83 mm] |
| Displacement | 512 cc [31.27 ci] |
| Sparkplug gap | 0.025 inches [0.635 mm] |
| Starter volts | 12 |
| Starter | Electric |
Transmission Information of John Deere, 140Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Oil change | 500 h |
|---|---|
| Transmission | Sundstrand 15 |
| Oil type | Deere 303 |
| Oil capacity | 5 qts [4.7 L] |
| Type | Shaft-driven hydrostatic |
| Deere 303 | |
| Gears | Infinite forward and reverse |
Transmission variants 2
| 4 | Brakes (not shown) |
|---|---|
| 3 | Throttle |
| 1 | Clutch |
| 5 | Parking brake |
| 2 | Forward/Reverse |
Mechanical Specs of John Deere, 140Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two-wheel drive |
| Manual steering |
| Open operator station. |
| Drum (1971 on) | |
| Differential mechanical disc (1969-1970) | |
| Brakes | Integral mechanical disc (1968) |
Power Information of John Deere, 140Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Live |
|---|---|
| Front PTO | Independent |
| Clutch | Electric |
Three-Point Hitch of John Deere, 140
Hitch category and rear/front lift capacity.
| Rear Type | 0 OptOptional |
|---|
Electrical System of John Deere, 140
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Battery AH | 40 |
Frequently asked questions
How much horsepower does the John Deere 140 have?
The John Deere 140 delivers 12 HP.
What years was the John Deere 140 produced?
The John Deere 140 was produced in 1968-1974.
What engine does the John Deere 140 have?
The John Deere 140 is powered by a Gasoline, 1-cylinder engine.
What transmission does the John Deere 140 use?
The John Deere 140 uses a Sundstrand 15 transmission.
How much does the John Deere 140 weigh?
The John Deere 140 weighs 730 lbs (140H1) [331 kg].
Is the John Deere 140 4WD?
The John Deere 140 is available in 2WD.