Introduction
John Deere 727A Zero-Turn Mower
The John Deere 727A is a zero-turn mower produced between 2004 and 2007 at the John Deere facility in Fuquay-Varina, North Carolina, USA. This professional-grade machine is engineered for efficient lawn maintenance and high-maneuverability landscaping tasks.
Engine and Power
The 727A is powered by a Kawasaki FH680V engine. This air-cooled, vertical-shaft V-twin gasoline engine features two cylinders and a displacement of 675 cc (41.2 ci). It delivers 23 hp (17.2 kW) and utilizes a carburetor fuel system. The engine is started via a 12-volt electric starter system.
Transmission and Handling
The machine utilizes a Kanzaki DUP 10A hydrostatic transmission, which provides infinite forward and reverse gear ratios for precise speed control. It features two-wheel drive and is equipped with power steering to reduce operator fatigue during complex mowing maneuvers.
Mowing and Hydraulic Systems
The mower is configured with a 54-inch cutting deck. It is equipped with an independent mid-mounted PTO (Power Take-Off) that utilizes an electric clutch, allowing the operator to engage or disengage the mower deck efficiently.
Dimensions and Safety
The unit has a total length of 190 cm (75 inches) and a height of 182 cm (71.8 inches) when measured at the top of the two-post folding ROPS (Roll-Over Protective Structure). It weighs 523 kg (1155 lbs). It rides on 13x5-6 front turf tires and 23x9.5-12 rear turf tires designed to minimize ground pressure.
Conclusion
The John Deere 727A is a specialized zero-turn mower suited for commercial or large-scale residential landscaping. Its combination of a high-torque Kawasaki engine, hydrostatic drive, and power steering makes it an effective tool for environments requiring frequent obstacle navigation and efficient grass cutting.
Production Information of John Deere, 727A
- Zero-turn mower
- Built in Fuquay-Varina, North Carolina, USA
| Manufacturer | John Deere |
|---|
Dimension and Tires Information of John Deere, 727A
| Length | 75 inches [190 cm] |
|---|---|
| Height (ROPS) | 71.8 inches [182 cm] |
| Weight | 1155 lbs [523 kg] |
| Lawn/turf front | 13x5-6 |
|---|---|
| Lawn/turf rear | 23x9.5-12 |
Engine Specifications of John Deere, 727A
- Kawasaki FH680V
- Air-cooled vertical-shaft V-Twin
- Gasoline
- 2-cylinder
| Power | 23 hp [17.2 kW] |
|---|---|
| Displacement | 675 cc [41.2 ci] |
| Fuel system | Carburetor |
| Bore/Stroke | 2.96x2.99 inches [75 x 76 mm] |
| Starter volts | 12 |
| Starter | Electric |
Transmission Information of John Deere, 727A
Transmission variants 1
| Transmission | Kanzaki DUP 10A |
|---|---|
| Type | Hydrostatic |
| Gears | Infinite forward and reverse |
Mechanical Specs of John Deere, 727A
- Two-wheel drive
- Power steering
- Two-post folding ROPS.
Power Information of John Deere, 727A
| Mid PTO | Independent |
|---|---|
| Clutch | Electric |
Electrical System of John Deere, 727A
| Ground | Negative |
|---|---|
| Battery volts | 12 |
Where it sits
With 23 HP, the John Deere 727A sits just above 717A (19 HP) in John Deere's range. Its power puts it in the 76th percentile of 2000s models in our database (1174 machines).
Frequently asked questions
How much horsepower does the John Deere 727A have?
The John Deere 727A delivers 23 HP.
What years was the John Deere 727A produced?
The John Deere 727A was produced in 2004-2007.
What engine does the John Deere 727A have?
The John Deere 727A is powered by a Gasoline, 2-cylinder engine.
What transmission does the John Deere 727A use?
The John Deere 727A uses a Kanzaki DUP 10A transmission.
How much does the John Deere 727A weigh?
The John Deere 727A weighs 1155 lbs [523 kg].
Is the John Deere 727A 4WD?
The John Deere 727A is available in 2WD.