Introduction
Production Information of John Deere, 756
The production information of the tractor (756) includes details about its manufacturing.
| Lawn tractor |
| Built in Horicon, Wisconsin, USA |
| Manufacturer | John Deere |
|---|
Dimension and Tires Information of John Deere, 756
This section sums up the dimension and tires information of the tractor.
| Front tread | 36.9 inches [93 cm] |
|---|---|
| Wheelbase | 79 inches [200 cm] |
| Weight | 1696 lbs [769 kg] |
| Height (ROPS) | 74.9 inches [190 cm] |
| Length | 10.3.3 inches [26 cm] |
| Rear tread | 34 to 40.1 inches [86 to 101 cm] |
| 2WD Clearance (front axle) | 12.7 inches [32 cm] |
| Height (hood) | 51.6 inches [131 cm] |
| Lawn/turf front | 23x8.50-12 |
|---|---|
| Lawn/turf rear | 33x12.50-15 |
Engine Specifications of John Deere, 756
Get the specifications for the engine and if different options are available.
| Yanmar |
| Liquid-cooled |
| 3-cylinder |
| Diesel |
| Coolant capacity | 4 qts [3.8 L] |
|---|---|
| Oil capacity | 2.9 qts [2.7 L] |
| Fuel system | Indirect injection |
| Rated RPM | 3200 |
| Compression | 22.3:1 |
| Displacement | 878 cc [53.6 ci] |
| Power (gross) | 20 hp [14.9 kW] |
| Air cleaner | Dry |
| Bore/Stroke | 2.835x2.835 inches [72 x 72 mm] |
| Starter volts | 12 |
| Starter | Electric |
| Operating RPM | 1450-3450 |
Transmission Information of John Deere, 756Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Shaft-driven hydrostatic |
|---|---|
| Gears | Infinite forward and reverse (2-range) |
| Oil capacity | 18 qts [17.0 L] |
Mechanical Specs of John Deere, 756Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two- or four-wheel drive |
| Two-post ROPS. |
| Wet disc brakes |
| Power steering |
| Final drives | Planetary |
|---|
Power Information of John Deere, 756Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Mid PTO Type | 2100 |
| Mid PTO | Independent |
| Clutch | Hydraulic disc |
| Rear PTO Type | 540 (1.375) |
Hydraulics Specifications of John Deere, 756
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Pump flow | 5.6 gpm [21.2 lpm] |
| Capacity | 4.5 gal [17.0 L] |
| Pressure | 2050 psi [141.3 bar] |
Three-Point Hitch of John Deere, 756
Hitch category and rear/front lift capacity.
| Rear Type | I OptOptional |
|---|---|
| Rear lift (at ends) | 1686 lbs [764 kg] |
| Rear lift (at 24"/610mm) | 841 lbs [381 kg] |
Electrical System of John Deere, 756
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Battery CCA | 491 |
| Charging system | Alternator |
| Charging amps | 35 |
Frequently asked questions
How much horsepower does the John Deere 756 have?
The John Deere 756 delivers 20 HP.
What years was the John Deere 756 produced?
The John Deere 756 was produced in 1986-1998.
What engine does the John Deere 756 have?
The John Deere 756 is powered by a Diesel, 3-cylinder engine.
What transmission does the John Deere 756 use?
The John Deere 756 uses a Shaft-driven hydrostatic transmission.
How much does the John Deere 756 weigh?
The John Deere 756 weighs 1696 lbs [769 kg].
Is the John Deere 756 4WD?
The John Deere 756 is available in 2WD/4WD.