John Deere LA130 lawn tractor

John Deere LA130

Power

21 hp

Production

2007

Engine

Gasoline, 2-cylinder

Transmission

Tuff Torq K46

Weight

524 lbs [237 kg]

Drive

2WD

From the same series:

LA120
LA140

Introduction

John Deere LA130 Lawn Tractor

The John Deere LA130 is a lawn tractor manufactured in Greeneville, Tennessee, USA, between 2006 and 2007. Designed for residential property maintenance, this model belongs to the John Deere LA-series, offering a balance of performance and utility for lawn care tasks.

Engine and Powertrain

The tractor is equipped with a 2-cylinder, air-cooled Briggs & Stratton gasoline engine. With a displacement of 724 cc (44.2 ci), it delivers a rated power of 21 hp (15.7 kW) at 3600 RPM. The engine uses a paper and foam element air cleaner and requires 2 quarts (1.9 L) of oil for lubrication.

Transmission and PTO

Power is transmitted to the ground via a Tuff Torq K46 belt-driven hydrostatic transmission, which provides the operator with infinite forward and reverse speeds. The unit is sealed, and owner maintenance of the transmission oil is not recommended. The tractor features an independent mid-PTO with an electric clutch for engagement.

Mechanical and Dimensions

Built on a two-wheel-drive chassis, the LA130 utilizes manual steering and features an open operator station. The machine has a wheelbase of 48.9 inches (124 cm) and a total weight of 524 lbs (237 kg). It is fitted with 16x6.5-8 front tires and 22x9.5-12 rear tires, specifically designed for lawn and turf applications.

Electrical System

The electrical system operates on a 12-volt architecture with a negative ground. It utilizes a 12-volt starter and is capable of 9 charging amps to maintain the battery charge during operation.

Conclusion

The John Deere LA130 is a standard lawn tractor configuration featuring a 48-inch mower deck. Its hydrostatic transmission and 21 hp engine make it suitable for general residential mowing and property maintenance, providing reliable performance for typical lawn care requirements.

Production Information of John Deere, LA130

  • Original price was $1,999 in 2007
  • Lawn tractor
  • Built in Greeneville, Tennessee, USA
ManufacturerJohn Deere

Dimension and Tires Information of John Deere, LA130

Wheelbase48.9 inches [124 cm]
Weight524 lbs [237 kg]
Height45 inches [114 cm]
Length69.25 inches [175 cm]
Width60 inches [152 cm]
Lawn/turf front16x6.5-8
Lawn/turf rear22x9.5-12

Engine Specifications of John Deere, LA130

  • Briggs & Stratton
  • Air-cooled
  • Gasoline
  • 2-cylinder
Oil capacity2 qts [1.9 L]
Displacement724 cc [44.2 ci]
Air cleanerPaper and foam elements
Bore/Stroke2.97x2.89 inches [75 x 73 mm]
Sparkplug gap0.030 inches [0.762 mm]
Starter volts12
Rated RPM3600
Power21 hp [15.7 kW]

Transmission Information of John Deere, LA130

Transmission variants 1

TransmissionTuff Torq K46
Oil changeSealed unit, owner service is not recommended
TypeBelt-driven hydrostatic
GearsInfinite forward and reverse

Mechanical Specs of John Deere, LA130

  • Two-wheel drive
  • Manual steering
  • Open operator station.

Power Information of John Deere, LA130

Mid PTOIndependent
ClutchElectric

Electrical System of John Deere, LA130

GroundNegative
Charging amps9
Battery volts12

Where it sits

With 21 HP, the John Deere LA130 sits just below 145 (22 HP) in John Deere's range. Its power puts it in the 61th percentile of 2000s models in our database (1174 machines).

Frequently asked questions

How much horsepower does the John Deere LA130 have?

The John Deere LA130 delivers 21 HP.

What years was the John Deere LA130 produced?

The John Deere LA130 was produced in 2007.

What engine does the John Deere LA130 have?

The John Deere LA130 is powered by a Gasoline, 2-cylinder engine.

What transmission does the John Deere LA130 use?

The John Deere LA130 uses a Tuff Torq K46 transmission.

How much does the John Deere LA130 weigh?

The John Deere LA130 weighs 524 lbs [237 kg].

Is the John Deere LA130 4WD?

The John Deere LA130 is available in 2WD.

Compare the John Deere LA130 with another model