Introduction
Production Information of John Deere, X744
The production information of the tractor (X744) includes details about its manufacturing.
| Original price was $10,899 in 2011 |
| Garden tractor |
| Built in Horicon, Wisconsin, USA |
| Manufacturer | John Deere |
|---|
Dimension and Tires Information of John Deere, X744
This section sums up the dimension and tires information of the tractor.
| Wheelbase | 54.5 inches [138 cm] |
|---|---|
| Weight | 1060 lbs*Weight of tractor only. [480 kg] |
| Height | 50 inches [127 cm] |
| Length | 78.8 inches [200 cm] |
| Width | 46.8 inches [118 cm] |
| Lawn/turf front | 18x8.8-8 |
|---|---|
| Lawn/turf rear | 26x12-12 |
Engine Specifications of John Deere, X744
Get the specifications for the engine and if different options are available.
| Yanmar 3TNM72 |
| Liquid-cooled OHV |
| 3-cylinder |
| In 2011, (tractor serial number 060001) the 3TNM72 replaced the original engine. |
| Diesel |
| Coolant capacity | 3 qts [2.8 L] |
|---|---|
| Oil capacity | 3.4 qts [3.2 L] |
| Fuel system | Indirect injection |
| Block heater OptOptional | |
| Pre-heating | Glow plugs |
| Power (gross) | 24 hp [17.9 kW] |
| Air cleaner | Paper element |
| Displacement | 904 cc [55.2 ci] |
| Idle RPM | 1450-3600 |
| Compression | 23.4:1 |
| Coolant heater OptOptional |
Transmission Information of John Deere, X744Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Hydrostatic transmission with Twin Touch foot pedals and dashboard-mounted cruise control standard. |
| Transmission | Tuff Torq K92 |
|---|---|
| Oil capacity | 6 qts [5.7 L] |
| Type | Shaft-driven hydrostatic |
| Gears | Infinite forward and reverse |
Transmission variants 2
| 6 | Parking Brake |
|---|---|
| 4 | Forward |
| 3 | Parking Brake |
| 1 | Differential Lock |
| 7 | Cruise Control |
| 5 | Reverse |
| 2 | Throttle |
Mechanical Specs of John Deere, X744Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two-wheel drive |
| Open operator station featuring 18-inch seat with 7-inches of adjustment. Cupholder, toolbox, tilt steering, and 12-volt outlet standard. Optional soft-side or hard cab. |
| Wet disc brakes |
| Steering | Four-wheel hydrostatic power |
|---|
Power Information of John Deere, X744Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent OptOptional |
|---|---|
| Front PTO | Optional |
| Mid PTO Type | 2000 |
| Rear PTO Type | 540 |
| Front PTO Type | 2000 |
| Mid PTO | Independent |
Hydraulics Specifications of John Deere, X744
Hydraulic system type, pressure, pump flow and valves.
| Pressure | 924 psi [63.7 bar] |
|---|---|
| Valves | 2 |
| Total flow | 4.5 gpm [17.0 lpm] |
Three-Point Hitch of John Deere, X744
Hitch category and rear/front lift capacity.
| Rear Type | 0 OptOptional |
|---|---|
| 1-Limited OptOptional |
Electrical System of John Deere, X744
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Battery CCA | 500 |
| Charging system | Alternator |
| Charging amps | 40 |
Frequently asked questions
How much horsepower does the John Deere X744 have?
The John Deere X744 delivers 24 HP.
What years was the John Deere X744 produced?
The John Deere X744 was produced in 2006-2012.
What engine does the John Deere X744 have?
The John Deere X744 is powered by a Diesel, 3-cylinder engine.
What transmission does the John Deere X744 use?
The John Deere X744 uses a Tuff Torq K92 transmission.
How much does the John Deere X744 weigh?
The John Deere X744 weighs 1060 lbs*Weight of tractor only. [480 kg].
Is the John Deere X744 4WD?
The John Deere X744 is available in 2WD.