Introduction
Production Information of John Deere, X748
The production information of the tractor (X748) includes details about its manufacturing.
| Original price was $11,449 in 2011 |
| Garden tractor |
| Built in Horicon, Wisconsin, USA |
| Manufacturer | John Deere |
|---|
Dimension and Tires Information of John Deere, X748
This section sums up the dimension and tires information of the tractor.
| Wheelbase | 55.7 inches [141 cm] |
|---|---|
| Weight | 1080 lbs (early) [489 kg] |
| Height | 50 inches [127 cm] |
| Length | 78.8 inches [200 cm] |
| 1153 lbs (late) [523 kg] | |
| Width | 46.8 inches [118 cm] |
| Lawn/turf front | 18x8.5-10 |
|---|---|
| Lawn/turf rear | 26x12-12 |
Engine Specifications of John Deere, X748
Get the specifications for the engine and if different options are available.
| Yanmar 3TNM72 |
| Liquid-cooled OHV |
| 3-cylinder |
| In 2011, (tractor serial number 060001) the 3TNM72 replaced the original engine. |
| Diesel |
| Coolant capacity | 3 qts [2.8 L] |
|---|---|
| Oil capacity | 3.4 qts [3.2 L] |
| Fuel system | Indirect injection |
| Block heater (optional) | |
| Pre-heating | Glow plugs |
| Power (gross) | 24 hp [17.9 kW] |
| Air cleaner | Paper element |
| Displacement | 904 cc [55.2 ci] |
| Idle RPM | 1450-3600 |
| Compression | 23.4:1 |
| Coolant heater (optional) |
Transmission Information of John Deere, X748Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Hydrostatic transmission with Twin Touch foot pedals and dashboard-mounted cruise control standard. |
| Transmission | Tuff Torq K92 |
|---|---|
| Oil capacity | 7.2 qts [6.8 L] |
| Type | Shaft-driven hydrostatic |
| Gears | Infinite forward and reverse |
Transmission variants 2
| 6 | Cruise control |
|---|---|
| 4 | Reverse |
| 3 | Forward |
| 1 | Throttle |
| 7 | Differential lock |
| 5 | Parking brake |
| 2 | Brake |
Mechanical Specs of John Deere, X748Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Open operator station featuring 18-inch seat with 7-inches of adjustment. Cupholder, toolbox, tilt steering, and 12-volt outlet standard. Optional soft-side or hard cab. Special Edition seat has armrests plus tilt and lumbar adjustment. |
| Wet disc brakes |
| Drive | 4x4 MFWD 4WD (2006-2008) |
|---|---|
| 4x4 HFWD 4WD (2009-) | |
| Steering | Hydrostatic power |
Power Information of John Deere, X748Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent (optional) |
|---|---|
| Front PTO | Optional |
| Mid PTO Type | 2000 |
| Rear PTO Type | 540 |
| Front PTO Type | 2000 |
| Mid PTO | Independent |
Hydraulics Specifications of John Deere, X748
Hydraulic system type, pressure, pump flow and valves.
| Pressure | 924 psi [63.7 bar] |
|---|---|
| Valves | 2 |
| Total flow | 6.5 gpm [24.6 lpm] |
Three-Point Hitch of John Deere, X748
Hitch category and rear/front lift capacity.
| Rear Type | 0 (optional) |
|---|---|
| 1-Limited (optional) |
Electrical System of John Deere, X748
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Battery CCA | 500 |
| Charging system | Alternator |
| Charging amps | 40 |
Frequently asked questions
How much horsepower does the John Deere X748 have?
The John Deere X748 delivers 24 HP.
What years was the John Deere X748 produced?
The John Deere X748 was produced in 2006-2012.
What engine does the John Deere X748 have?
The John Deere X748 is powered by a Diesel, 3-cylinder engine.
What transmission does the John Deere X748 use?
The John Deere X748 uses a Tuff Torq K92 transmission.
How much does the John Deere X748 weigh?
The John Deere X748 weighs 1080 lbs (early) [489 kg].
Is the John Deere X748 4WD?
The John Deere X748 is available in 4WD.