Introduction
John Deere Z510A Zero-Turn Mower
The John Deere Z510A is a zero-turn mower manufactured in Fuquay-Varina, North Carolina, USA, between 2008 and 2009. Designed for efficient lawn maintenance, this machine falls into the category of residential and commercial-grade zero-turn equipment.
Engine and Performance
The Z510A is powered by a Kohler SV715 gasoline engine. This 2-cylinder, air-cooled, vertical-shaft V-Twin engine delivers 22 horsepower (16.4 kW) from a 724 cc displacement. The engine utilizes an electric starter system operating on 12 volts, supported by a 160 CCA battery.
Transmission and Maneuverability
The drivetrain features a Parker Hannifin hydrostatic transmission, providing infinite forward and reverse speed control without the need for manual gear shifting. As a two-wheel drive machine, it utilizes power steering to facilitate the zero-turn capability, allowing for high precision when navigating around obstacles.
Dimensions and Chassis
The mower rests on a wheelbase of 52.9 inches (134 cm) and has a total weight of 1,076 lbs (488 kg). It is equipped with specific lawn/turf tires, measuring 13x5.0-6 at the front and 22x9.5-12 at the rear, designed to minimize ground compaction. The operator is protected by a two-post folding Roll-Over Protective Structure (ROPS).
Cutting System
The machine is configured with a 48-inch mower deck. The power take-off (PTO) is an independent mid-mounted system, controlled via an electric clutch, which allows for the engagement and disengagement of the cutting blades with minimal operator effort.
Conclusion
The John Deere Z510A is built for operators requiring high maneuverability and efficient grass cutting. Its combination of a hydrostatic transmission, power steering, and a 48-inch deck makes it a suitable tool for maintaining expansive lawns. With an original list price of $6,699 in 2009, it represents a standard configuration for its production era.
Production Information of John Deere, Z510A
- Original price was $6,699 in 2009
- Zero-turn mower
- Built in Fuquay-Varina, North Carolina, USA
| Manufacturer | John Deere |
|---|
Dimension and Tires Information of John Deere, Z510A
| Wheelbase | 52.9 inches [134 cm] |
|---|---|
| Weight | 1076 lbs [488 kg] |
| Length | 82.2 inches [208 cm] |
| Height (ROPS) | 72.7 inches [184 cm] |
| Lawn/turf front | 13x5.0-6 |
|---|---|
| Lawn/turf rear | 22x9.5-12 |
Engine Specifications of John Deere, Z510A
- Kohler SV715
- Air-cooled vertical-shaft V-Twin
- Gasoline
- 2-cylinder
| Power | 22 hp [16.4 kW] |
|---|---|
| Displacement | 724 cc [44.2 ci] |
| Starter | Electric |
| Bore/Stroke | 3.27x2.64 inches [83 x 67 mm] |
| Oil capacity | 2 qts [1.9 L] |
| Starter volts | 12 |
Transmission Information of John Deere, Z510A
Transmission variants 1
| Transmission | Parker Hannifin |
|---|---|
| Type | Hydrostatic |
| Gears | Infinite forward and reverse |
Mechanical Specs of John Deere, Z510A
- Two-wheel drive
- Power steering
- Two-post folding ROPS.
Power Information of John Deere, Z510A
| Mid PTO | Independent |
|---|---|
| Clutch | Electric |
Electrical System of John Deere, Z510A
| Ground | Negative |
|---|---|
| Battery CCA | 160 |
| Battery volts | 12 |
Where it sits
With 22 HP, the John Deere Z510A sits just below Z520A (25 HP) in John Deere's range. Its power puts it in the 69th percentile of 2000s models in our database (1174 machines).
Frequently asked questions
How much horsepower does the John Deere Z510A have?
The John Deere Z510A delivers 22 HP.
What years was the John Deere Z510A produced?
The John Deere Z510A was produced in 2008-2009.
What engine does the John Deere Z510A have?
The John Deere Z510A is powered by a Gasoline, 2-cylinder engine.
What transmission does the John Deere Z510A use?
The John Deere Z510A uses a Parker Hannifin transmission.
How much does the John Deere Z510A weigh?
The John Deere Z510A weighs 1076 lbs [488 kg].
Is the John Deere Z510A 4WD?
The John Deere Z510A is available in 2WD.