Introduction
Sabre 1538GS Lawn Tractor
The Sabre 1538GS is a lawn tractor manufactured between 1997 and 1998 in Greeneville, Tennessee, USA. As a product line associated with John Deere, this model was designed for residential lawn maintenance, balancing compact dimensions with standard utility features.
Engine and Powertrain
The tractor is powered by a single-cylinder, air-cooled Briggs & Stratton 28N707 gasoline engine. It produces a gross power output of 15 hp (11.2 kW) with a displacement of 465 cc (28.4 ci). The engine utilizes a manual-clutch system and a belt-driven Dana 4360 gear transmission, which provides 5 forward and 1 reverse gear ratio for speed management during operation.
Chassis and Handling
Built on a two-wheel drive configuration, the 1538GS utilizes manual steering and disc brakes. It features an open operator station designed for visibility and ease of access. The machine rides on turf-specific tires, measuring 15x6.00-6 at the front and 20x8.00-8 at the rear, minimizing ground disturbance during mowing tasks.
Electrical and Implement Systems
The electrical system operates on 12 volts, supported by a U1 group battery with 230 cold-cranking amps (CCA). For implement operation, the tractor is equipped with an independent mid-mounted power take-off (PTO) controlled by a manual clutch, which supports the included 38-inch mower deck.
Conclusion
With a wheelbase of 44.7 inches and a total weight of 391 lbs (177 kg), the Sabre 1538GS is a compact, maneuverable machine suitable for small to medium-sized residential properties requiring consistent lawn care performance.
Production Information of Sabre, 1538GS
- Lawn tractor
- Built in Greeneville, Tennessee, USA
| Manufacturer | Sabre (a part of John Deere) |
|---|
Dimension and Tires Information of Sabre, 1538GS
| Wheelbase | 44.7 inches [113 cm] |
|---|---|
| Weight | 391 lbs [177 kg] |
| Height (steering wheel) | 38.6 inches [98 cm] |
| Length | 60 inches [152 cm] |
| Width | 36 inches [91 cm] |
| Lawn/turf front | 15x6.00-6 |
|---|---|
| Lawn/turf rear | 20x8.00-8 |
Engine Specifications of Sabre, 1538GS
- Briggs & Stratton 28N707
- Air-cooled vertical-shaft
- Gasoline
- 1-cylinder
| Starter volts | 12 |
|---|---|
| Displacement | 465 cc [28.4 ci] |
| Air cleaner | Paper and foam |
| Bore/Stroke | 3.44x3.06 inches [87 x 78 mm] |
| Oil capacity | 1.5 qts [1.4 L] |
| Starter | Electric |
| Idle RPM | 1750-3300 |
| Power (gross) | 15 hp [11.2 kW] |
Transmission Information of Sabre, 1538GS
Transmission variants 1
| Transmission | Dana 4360 |
|---|---|
| Type | Belt-driven gear |
| Gears | 5 forward and 1 reverse |
Mechanical Specs of Sabre, 1538GS
- Two-wheel drive
- Open operator station.
- Manual steering
- Disc brakes
Power Information of Sabre, 1538GS
| Mid PTO | Independent |
|---|---|
| Clutch | Manual |
Electrical System of Sabre, 1538GS
| Ground | Negative |
|---|---|
| Battery Group | U1 |
| Battery volts | 12 |
| Charging amps | 3 |
| Battery CCA | 230 |
Where it sits
With 15 HP, the Sabre 1538GS sits between 1438HS (14 HP) and 1638HS (16 HP) in Sabre's range. Its power puts it in the 51th percentile of 1990s models in our database (1093 machines).
Frequently asked questions
How much horsepower does the Sabre 1538GS have?
The Sabre 1538GS delivers 15 HP.
What years was the Sabre 1538GS produced?
The Sabre 1538GS was produced in 1997-1998.
What engine does the Sabre 1538GS have?
The Sabre 1538GS is powered by a Gasoline, 1-cylinder engine.
What transmission does the Sabre 1538GS use?
The Sabre 1538GS uses a Dana 4360 transmission.
How much does the Sabre 1538GS weigh?
The Sabre 1538GS weighs 391 lbs [177 kg].
Is the Sabre 1538GS 4WD?
The Sabre 1538GS is available in 2WD.