Simplicity 3008 Grabber
Power
8 hp
Production
1974-1977
Engine
Gasoline, 1-cylinder
Transmission
Belt-driven gear
Weight
287 lbs [130 kg]
Drive
2WD
Introduction
Simplicity 3008 Grabber Riding Lawn Mower
The Simplicity 3008 Grabber is a riding lawn mower produced between 1974 and 1977. Manufactured by Simplicity, then a division of Allis-Chalmers, in Port Washington, Wisconsin, USA, this machine was designed primarily for residential lawn maintenance.
Engine and Powertrain
The tractor is powered by a single-cylinder, air-cooled Briggs & Stratton 190402 gasoline engine. It produces 8 hp (6.0 kW) with a displacement of 318 cc (19.44 ci). The engine features a vertical-shaft configuration and is equipped with an electric starter for operator convenience.
Transmission and Chassis
The drivetrain utilizes a belt-driven gear transmission, providing two forward gears and one reverse gear. The chassis is configured as a two-wheel drive system with manual steering, featuring an open operator station design. It rides on turf-specific tires, with 4.10/3.50x4 tires at the front and 16.00/6.50x8 tires at the rear.
Dimensions and Mowing Capacity
The 3008 Grabber is equipped with a 30-inch mower deck. The unit has a wheelbase of 45 inches (114 cm) and an overall length of 61.5 inches (156 cm). The height to the steering wheel is 39 inches (99 cm), and the shipping weight is approximately 287 lbs (130 kg).
Conclusion
The Simplicity 3008 Grabber is a compact, mechanical riding mower suited for standard residential lawn care tasks. Its design prioritizes simplicity and maneuverability, reflecting the engineering standards of the mid-1970s for small-scale grounds maintenance.
Production Information of Simplicity, 3008 Grabber
- Riding lawn mower
- Built in Port Washington, Wisconsin, USA
| Manufacturer | Simplicity (a part of Allis Chalmers) |
|---|
Dimension and Tires Information of Simplicity, 3008 Grabber
| Wheelbase | 45 inches [114 cm] |
|---|---|
| Shipping weight | 287 lbs [130 kg] |
| Height (hood) | 29.25 inches [74 cm] |
| Length | 61.5 inches [156 cm] |
| Height (steering wheel) | 39 inches [99 cm] |
| Lawn/turf front | 4.10/3.50x4 |
|---|---|
| Lawn/turf rear | 16.00/6.50x8 |
Engine Specifications of Simplicity, 3008 Grabber
- Briggs & Stratton 190402
- Air-cooled vertical-shaft
- Gasoline
- 1-cylinder
| Power | 8 hp [6.0 kW] |
|---|---|
| Displacement | 318 cc [19.44 ci] |
| Starter type | Electric |
| Bore/Stroke | 3.00x2.75 inches [76 x 70 mm] |
Transmission Information of Simplicity, 3008 Grabber
Transmission variants 1
| Type | Belt-driven gear |
|---|---|
| Gears | 2 forward and 1 reverse |
Mechanical Specs of Simplicity, 3008 Grabber
- Two-wheel drive
- Manual steering
- Open operator station.
Where it sits
With 8 HP, the Simplicity 3008 Grabber sits between Yeoman 637 (7 HP) and Landlord 9HP (9 HP) in Simplicity's range. Its power puts it in the 52th percentile of 1970s models in our database (1008 machines).
Frequently asked questions
How much horsepower does the Simplicity 3008 Grabber have?
The Simplicity 3008 Grabber delivers 8 HP.
What years was the Simplicity 3008 Grabber produced?
The Simplicity 3008 Grabber was produced in 1974-1977.
What engine does the Simplicity 3008 Grabber have?
The Simplicity 3008 Grabber is powered by a Gasoline, 1-cylinder engine.
What transmission does the Simplicity 3008 Grabber use?
The Simplicity 3008 Grabber uses a Belt-driven gear transmission.
How much does the Simplicity 3008 Grabber weigh?
The Simplicity 3008 Grabber weighs 287 lbs [130 kg].
Is the Simplicity 3008 Grabber 4WD?
The Simplicity 3008 Grabber is available in 2WD.