Snapper lawn tractors 28083
Power
8 hp
Production
1979-1982
Engine
Gasoline, 1-cylinder
Transmission
Friction disc
Drive
2WD
From the same series:
Introduction
Snapper 28083 Riding Lawn Mower
The Snapper 28083 is a riding lawn mower manufactured in McDonough, Georgia, USA. Produced between 1979 and 1982, this machine was designed for residential lawn maintenance and grounds care.
Engine and Powertrain
The mower is powered by an air-cooled, single-cylinder gasoline engine producing a gross power output of 8 hp (6.0 kW). The engine features a vertical shaft configuration. Starting is managed via a manual recoil starter, with an optional electric start system available, supported by a 12-volt electrical system with a negative ground.
Transmission and Drive System
Power is transmitted to the wheels through a friction disc transmission system. The unit provides five forward gears and one reverse gear, allowing for speed adjustment during mowing operations. The machine utilizes a two-wheel drive configuration, controlled by manual steering.
Mowing and PTO Capabilities
The tractor is equipped with a 28-inch mower deck. It features an independent mid-mounted power take-off (PTO) of the pulley type, which is engaged via a manual clutch system, facilitating the operation of the cutting deck.
Chassis and Tires
The unit is built with an open operator station for visibility and accessibility. It rolls on lawn and turf tires sized 10.50x4.10-4 at the front and 16x6.50-8 at the rear, designed to minimize surface compaction during operation.
Conclusion
The Snapper 28083 serves as a functional, entry-level riding mower suitable for standard lawn maintenance tasks, characterized by its straightforward mechanical design and air-cooled engine architecture.
Production Information of Snapper lawn tractors, 28083
- Riding lawn mower
- Built in McDonough, Georgia, USA
| Manufacturer | Snapper |
|---|
Dimension and Tires Information of Snapper lawn tractors, 28083
| Lawn/turf front | 10.50x4.10-4 |
|---|---|
| Lawn/turf rear | 16x6.50-8 |
Engine Specifications of Snapper lawn tractors, 28083
- Gasoline
- 1-cylinder
- Air-cooled vertical-shaft
| Starter volts | 12 |
|---|---|
| Starter | Manual recoil |
| Power (gross) | 8 hp [6.0 kW] |
| Power (gross)(optional) | Electric |
Transmission Information of Snapper lawn tractors, 28083
Transmission variants 1
| Type | Friction disc |
|---|---|
| Gears | 5 forward and 1 reverse |
Mechanical Specs of Snapper lawn tractors, 28083
- Two-wheel drive
- Manual steering
- Open operator station.
Power Information of Snapper lawn tractors, 28083
| Mid PTO | Independent |
|---|---|
| Clutch | Manual |
| Mid PTO Type | Pulley |
Electrical System of Snapper lawn tractors, 28083
| Ground | Negative |
|---|---|
| Battery volts | 12 |
Where it sits
Its power puts it in the 52th percentile of 1970s models in our database (1008 machines).
Frequently asked questions
How much horsepower does the Snapper lawn tractors 28083 have?
The Snapper lawn tractors 28083 delivers 8 HP.
What years was the Snapper lawn tractors 28083 produced?
The Snapper lawn tractors 28083 was produced in 1979-1982.
What engine does the Snapper lawn tractors 28083 have?
The Snapper lawn tractors 28083 is powered by a Gasoline, 1-cylinder engine.
What transmission does the Snapper lawn tractors 28083 use?
The Snapper lawn tractors 28083 uses a Friction disc transmission.
Is the Snapper lawn tractors 28083 4WD?
The Snapper lawn tractors 28083 is available in 2WD.