Snapper lawn tractors 30108
Power
10 hp
Production
1991
Engine
Gasoline, 1-cylinder
Transmission
Friction disc
Drive
2WD
Introduction
Snapper 30108 Riding Lawn Mower
The Snapper 30108 is a riding lawn mower produced in 1991 at the manufacturer's facility in McDonough, Georgia, USA. Designed for residential property maintenance, this machine is configured with a 30-inch mower deck and is categorized as a two-wheel-drive utility tractor.
Engine Specifications
The unit is powered by a Briggs & Stratton 255707 gasoline engine. This single-cylinder, air-cooled motor features a vertical shaft and provides 10 horsepower (7.5 kW). The engine displacement is 361 cc (22.04 cubic inches) with a bore and stroke of 87 mm by 60 mm. It utilizes an electric starter powered by a 12-volt battery system with a negative ground.
Transmission and Drivetrain
The drivetrain utilizes a friction disc transmission system. Operators have access to 5 forward gears and 1 reverse gear to adjust travel speed during mowing tasks. The tractor operates on a two-wheel-drive system and is controlled via manual steering from an open operator station.
Power Take-Off and Mowing
The mower is equipped with an independent mid-mounted PTO (Power Take-Off). This system uses a pulley-type connection and is engaged via a manual clutch, allowing the operator to control the 30-inch mower deck independently of the tractor's ground speed.
Conclusion
The Snapper 30108 is a straightforward, mechanically driven riding mower suited for lawn care applications. Its combination of a simple friction disc transmission and a standard 30-inch deck makes it a representative example of early 1990s residential mowing equipment.
Production Information of Snapper lawn tractors, 30108
- Riding lawn mower
- Built in McDonough, Georgia, USA
| Manufacturer | Snapper |
|---|
Engine Specifications of Snapper lawn tractors, 30108
- Briggs & Stratton 255707
- Air-cooled vertical-shaft
- Gasoline
- 1-cylinder
| Power (gross) | 10 hp [7.5 kW] |
|---|---|
| Displacement | 361 cc [22.04 ci] |
| Starter | Electric |
| Bore/Stroke | 3.44x2.38 inches [87 x 60 mm] |
| Starter volts | 12 |
Transmission Information of Snapper lawn tractors, 30108
Transmission variants 1
| Type | Friction disc |
|---|---|
| Gears | 5 forward and 1 reverse |
Mechanical Specs of Snapper lawn tractors, 30108
- Two-wheel drive
- Manual steering
- Open operator station.
Power Information of Snapper lawn tractors, 30108
| Mid PTO | Independent |
|---|---|
| Clutch | Manual |
| Mid PTO Type | Pulley |
Electrical System of Snapper lawn tractors, 30108
| Ground | Negative |
|---|---|
| Battery volts | 12 |
Where it sits
With 10 HP, the Snapper lawn tractors 30108 sits between 300922B (9 HP) and 28113 (11 HP) in Snapper lawn tractors's range. Its power puts it in the 9th percentile of 1990s models in our database (1093 machines).
Frequently asked questions
How much horsepower does the Snapper lawn tractors 30108 have?
The Snapper lawn tractors 30108 delivers 10 HP.
What years was the Snapper lawn tractors 30108 produced?
The Snapper lawn tractors 30108 was produced in 1991.
What engine does the Snapper lawn tractors 30108 have?
The Snapper lawn tractors 30108 is powered by a Gasoline, 1-cylinder engine.
What transmission does the Snapper lawn tractors 30108 use?
The Snapper lawn tractors 30108 uses a Friction disc transmission.
Is the Snapper lawn tractors 30108 4WD?
The Snapper lawn tractors 30108 is available in 2WD.