Snapper lawn tractors 4111X5
Power
11 hp
Production
1985-1986
Engine
Gasoline, 1-cylinder
Transmission
Friction disc
Drive
2WD
Introduction
Snapper 4111X5: Riding Lawn Mower
The Snapper 4111X5 is a riding lawn mower manufactured between 1985 and 1986 in McDonough, Georgia, USA. Designed for residential turf maintenance, this machine belongs to the classic era of Snapper's rear-engine and compact riding mower lineup.
Engine and Powertrain
The mower is powered by an 11 hp (8.2 kW) gasoline engine. It utilizes a 1-cylinder, air-cooled, vertical-shaft V-Twin configuration. The electrical system operates on 12 volts, supported by an electric starter for reliable ignition.
Transmission and Operation
The drivetrain features a friction disc transmission system providing 5 forward gears and 1 reverse gear, allowing the operator to adjust speed based on terrain conditions. The machine is configured with two-wheel drive and manual steering, managed from an open operator station.
Mowing and PTO
The unit is equipped with a 41-inch mower deck. Power delivery to the attachment is facilitated through an independent mid-PTO system, which uses a manual clutch and a pulley-driven mechanism.
Chassis and Tires
The tractor rolls on lawn/turf-specific tires to minimize ground pressure. The front tires are sized 10.5x4.1-4, while the rear tires are sized 16x6.5-8, providing stability and traction on residential lawns.
Conclusion
The Snapper 4111X5 is a straightforward, mechanically driven riding mower suited for medium-sized lawn care tasks. Its design prioritizes simplicity and serviceability, typical of mid-1980s American small-engine utility equipment.
Production Information of Snapper lawn tractors, 4111X5
- Riding lawn mower
- Built in McDonough, Georgia, USA
| Manufacturer | Snapper |
|---|
Dimension and Tires Information of Snapper lawn tractors, 4111X5
| Lawn/turf front | 10.5x4.1-4 |
|---|---|
| Lawn/turf rear | 16x6.5-8 |
Engine Specifications of Snapper lawn tractors, 4111X5
- Gasoline
- 1-cylinder
- Air-cooled vertical-shaft V-Twin
| Starter | Electric |
|---|---|
| Power (gross) | 11 hp [8.2 kW] |
| Starter volts | 12 |
Transmission Information of Snapper lawn tractors, 4111X5
Transmission variants 1
| Type | Friction disc |
|---|---|
| Gears | 5 forward and 1 reverse |
Mechanical Specs of Snapper lawn tractors, 4111X5
- Two-wheel drive
- Manual steering
- Open operator station.
Power Information of Snapper lawn tractors, 4111X5
| Mid PTO | Independent |
|---|---|
| Clutch | Manual |
| Mid PTO Type | Pulley |
Electrical System of Snapper lawn tractors, 4111X5
| Ground | Negative |
|---|---|
| Battery volts | 12 |
Where it sits
With 11 HP, the Snapper lawn tractors 4111X5 sits between 301022BE (10 HP) and 28127 (12 HP) in Snapper lawn tractors's range. Its power puts it in the 42th percentile of 1980s models in our database (977 machines).
Frequently asked questions
How much horsepower does the Snapper lawn tractors 4111X5 have?
The Snapper lawn tractors 4111X5 delivers 11 HP.
What years was the Snapper lawn tractors 4111X5 produced?
The Snapper lawn tractors 4111X5 was produced in 1985-1986.
What engine does the Snapper lawn tractors 4111X5 have?
The Snapper lawn tractors 4111X5 is powered by a Gasoline, 1-cylinder engine.
What transmission does the Snapper lawn tractors 4111X5 use?
The Snapper lawn tractors 4111X5 uses a Friction disc transmission.
Is the Snapper lawn tractors 4111X5 4WD?
The Snapper lawn tractors 4111X5 is available in 2WD.