Introduction
Snapper LT2042 Lawn Tractor
The Snapper LT2042 is a lawn tractor produced between 2006 and 2010 as part of the LT18538 and LT2044 series. Manufactured by Snapper, a division of Briggs & Stratton, this machine is designed for residential property maintenance and turf management.
Engine Specifications
The tractor is powered by a Briggs & Stratton 2-cylinder V-Twin gasoline engine. This air-cooled, vertical-shaft unit produces a gross power output of 20 hp (14.9 kW). The electrical system utilizes a 12-volt battery with a 230 CCA rating and a negative ground configuration.
Transmission and Drive
The LT2042 features a Tuff Torq K-46 hydrostatic transmission, which is belt-driven and provides infinite forward and reverse speed control. The tractor operates on a two-wheel drive system and is steered via a manual steering mechanism.
Mowing and Attachments
The unit is equipped with a 42-inch mower deck. It includes an independent mid-mounted PTO (Power Take-Off) system with a pulley-driven type and an electric clutch for engagement, allowing for controlled operation of implements.
Dimensions and Chassis
Built on a 50-inch (127 cm) wheelbase, the tractor has an overall length of 71 inches (180 cm), a width of 37 inches (93 cm), and a height of 44 inches (111 cm). It weighs 494 lbs (224 kg) and utilizes 15x6.00-6 front and 20x8.00-8 rear lawn/turf tires. The operator station is of the open-platform design.
Conclusion
The Snapper LT2042 is a conventional lawn tractor suited for residential lawn care tasks. Its hydrostatic transmission and 20 hp engine provide the necessary performance for mowing and light property maintenance duties.
Production Information of Snapper lawn tractors, LT2042
- Lawn tractor
- Original price was $2,350 in 2007
| Manufacturer | Snapper (a part of Briggs & Stratton) |
|---|
Dimension and Tires Information of Snapper lawn tractors, LT2042
| Wheelbase | 50 inches [127 cm] |
|---|---|
| Weight | 494 lbs [224 kg] |
| Height | 44 inches [111 cm] |
| Length | 71 inches [180 cm] |
| Width | 37 inches [93 cm] |
| Lawn/turf front | 15x6.00-6 |
|---|---|
| Lawn/turf rear | 20x8.00-8 |
Engine Specifications of Snapper lawn tractors, LT2042
- Briggs & Stratton
- Air-cooled vertical-shaft V-Twin
- Gasoline
- 2-cylinder
| Power (gross) | 20 hp [14.9 kW] |
|---|---|
| Starter volts | 12 |
Transmission Information of Snapper lawn tractors, LT2042
Transmission variants 1
| Transmission | Tuff Torq K-46 |
|---|---|
| Type | Belt-driven hydrostatic |
| Gears | Infinite forward and reverse |
Mechanical Specs of Snapper lawn tractors, LT2042
- Two-wheel drive
- Manual steering
- Open operator station.
Power Information of Snapper lawn tractors, LT2042
| Mid PTO | Independent |
|---|---|
| Clutch | Electric |
| Mid PTO Type | Pulley |
Electrical System of Snapper lawn tractors, LT2042
| Ground | Negative |
|---|---|
| Battery CCA | 230 |
| Battery volts | 12 |
Where it sits
With 20 HP, the Snapper lawn tractors LT2042 sits just above LT18538 (18 HP) in Snapper lawn tractors's range. Its power puts it in the 56th percentile of 2000s models in our database (1174 machines).
Frequently asked questions
How much horsepower does the Snapper lawn tractors LT2042 have?
The Snapper lawn tractors LT2042 delivers 20 HP.
What years was the Snapper lawn tractors LT2042 produced?
The Snapper lawn tractors LT2042 was produced in 2006-2010.
What engine does the Snapper lawn tractors LT2042 have?
The Snapper lawn tractors LT2042 is powered by a Gasoline, 2-cylinder engine.
What transmission does the Snapper lawn tractors LT2042 use?
The Snapper lawn tractors LT2042 uses a Tuff Torq K-46 transmission.
How much does the Snapper lawn tractors LT2042 weigh?
The Snapper lawn tractors LT2042 weighs 494 lbs [224 kg].
Is the Snapper lawn tractors LT2042 4WD?
The Snapper lawn tractors LT2042 is available in 2WD.