Introduction
Snapper SPX 2242 Lawn Tractor
The Snapper SPX 2242 is a dedicated lawn tractor produced between 2014 and 2016 by Snapper, a division of Briggs & Stratton. This two-wheel-drive machine is engineered primarily for residential lawn maintenance, balancing user-friendly controls with consistent power output.
Engine and Performance
The tractor is powered by a Briggs & Stratton Intek engine. This 2-cylinder, air-cooled V-Twin gasoline engine features a vertical shaft configuration and delivers a gross power output of 22 hp (16.4 kW). The unit is started via a 12-volt electric starter system supported by a battery with a 230 cold-cranking amps (CCA) rating.
Transmission and Drivetrain
The SPX 2242 utilizes a Hydro-Gear T2 HP belt-driven hydrostatic transmission. This system provides infinite forward and reverse speed control, allowing the operator to adjust ground speed seamlessly without shifting gears. The tractor features manual steering and operates as a two-wheel-drive machine.
Mowing Deck and Dimensions
The machine is equipped with a 42-inch mower deck, suitable for maintaining medium to large-sized lawns. It features an independent front power take-off (PTO) engaged by an electric clutch. The chassis is supported by a cast iron front axle for increased durability. The tractor measures 71 inches in length, 55 inches in width, and 45 inches in height, riding on 15x6 front and 20x8 rear lawn and turf tires.
Conclusion
The Snapper SPX 2242 is a straightforward, reliable lawn tractor designed for homeowners. Its combination of a V-Twin engine, hydrostatic transmission, and electric PTO makes it a practical tool for efficient grass cutting and general yard maintenance.
Production Information of Snapper lawn tractors, SPX 2242
- Lawn tractor
- Original price was $1,999 in 2014
| Manufacturer | Snapper (a part of Briggs & Stratton) |
|---|
Dimension and Tires Information of Snapper lawn tractors, SPX 2242
| Length | 71 inches [180 cm] |
|---|---|
| Front axle | Cast iron |
| Width | 55 inches [139 cm] |
| Height | 45 inches [114 cm] |
| Lawn/turf front | 15x6 |
|---|---|
| Lawn/turf rear | 20x8 |
Engine Specifications of Snapper lawn tractors, SPX 2242
- Briggs & Stratton Intek
- Air-cooled vertical shaft V-Twin
- Gasoline
- 2-cylinder
| Starter volts | 12 |
|---|---|
| Power (gross) | 22 hp [16.4 kW] |
| Starter | Electric |
Transmission Information of Snapper lawn tractors, SPX 2242
Transmission variants 1
| Transmission | Hydro-Gear T2 HP |
|---|---|
| Type | Belt-driven hydrostatic |
| Gears | Infinite forward and reverse |
Mechanical Specs of Snapper lawn tractors, SPX 2242
- Two-wheel drive
| Steering | Manual |
|---|
Power Information of Snapper lawn tractors, SPX 2242
| Front PTO | Independent |
|---|---|
| Clutch | Electric |
Electrical System of Snapper lawn tractors, SPX 2242
| Ground | Negative |
|---|---|
| Battery CCA | 230 |
| Battery volts | 12 |
Where it sits
With 22 HP, the Snapper lawn tractors SPX 2242 sits between ZF2101DKU (21 HP) and GT2354 (23 HP) in Snapper lawn tractors's range. Its power puts it in the 45th percentile of 2010s models in our database (783 machines).
Frequently asked questions
How much horsepower does the Snapper lawn tractors SPX 2242 have?
The Snapper lawn tractors SPX 2242 delivers 22 HP.
What years was the Snapper lawn tractors SPX 2242 produced?
The Snapper lawn tractors SPX 2242 was produced in 2014-2016.
What engine does the Snapper lawn tractors SPX 2242 have?
The Snapper lawn tractors SPX 2242 is powered by a Gasoline, 2-cylinder engine.
What transmission does the Snapper lawn tractors SPX 2242 use?
The Snapper lawn tractors SPX 2242 uses a Hydro-Gear T2 HP transmission.
Is the Snapper lawn tractors SPX 2242 4WD?
The Snapper lawn tractors SPX 2242 is available in 2WD.