Wheel Horse Charger V7
Power
7 hp
Production
1968-1970
Engine
Gasoline, 1-cylinder
Transmission
Eaton 6
Weight
410 lbs [185 kg]
Drive
2WD
Introduction
Wheel Horse Charger V7 Garden Tractor
The Wheel Horse Charger V7 is a garden tractor produced between 1968 and 1970 in South Bend, Indiana, USA. Designed for residential landscaping and property maintenance, this model is recognized for its compact design and mechanical simplicity during the late 1960s era.
Engine and Power
The tractor is powered by a Tecumseh V70 gasoline engine. This single-cylinder, air-cooled unit features a vertical shaft configuration with a displacement of 245 cc (15 cubic inches). It produces 7 horsepower (5.2 kW) at a rated speed of 3600 RPM. The engine is supported by a 12-volt electrical system with a starter.
Transmission and Drive
Equipped with an Eaton 6 belt-driven hydrostatic transmission, the Charger V7 provides infinite forward and reverse speed control. This system allows the operator to adjust speed precisely without shifting gears. The tractor utilizes a two-wheel drive configuration.
Dimensions and Handling
The machine features a 42-inch wheelbase and an overall width of 32 inches, allowing for maneuverability in garden environments. It weighs approximately 410 lbs (185 kg). The unit is fitted with 13x5.00-6 front tires and 18x8.50-8 rear tires, specifically designed for lawn and turf applications to minimize surface damage.
Operator Station and Equipment
The operator station is of the open type, providing clear visibility and accessibility. The tractor was standard-equipped with a 36-inch mower deck for grass cutting operations.
Conclusion
The Wheel Horse Charger V7 is a representative example of small-frame garden tractors from the late 1960s. Its hydrostatic transmission and compact dimensions make it suitable for light-duty mowing and maintenance tasks in residential settings.
Production Information of Wheel Horse, Charger V7
- Garden tractor
- Built in South Bend, Indiana, USA
| Manufacturer | Wheel Horse |
|---|
Dimension and Tires Information of Wheel Horse, Charger V7
| Ground clearance | 4.5 inches [11 cm] |
|---|---|
| Wheelbase | 42 inches [106 cm] |
| Height (hood) | 31 inches [78 cm] |
| Height (steering wheel) | 36.5 inches [92 cm] |
| Length | 56 inches [142 cm] |
| Shipping weight | 410 lbs [185 kg] |
| Width | 32 inches [81 cm] |
| Lawn/turf front | 13x5.00-6 |
|---|---|
| Lawn/turf rear | 18x8.50-8 |
Engine Specifications of Wheel Horse, Charger V7
- Tecumseh V70
- Air-cooled vertical-shaft
- Gasoline
- 1-cylinder
| Power | 7 hp [5.2 kW] |
|---|---|
| Displacement | 245 cc [15 ci] |
| Rated RPM | 3600 |
| Bore/Stroke | 2.75x2.53 inches [70 x 64 mm] |
| Starter volts | 12 |
Transmission Information of Wheel Horse, Charger V7
Transmission variants 1
| Transmission | Eaton 6 |
|---|---|
| Type | Belt-driven hydrostatic |
| Gears | Infinite forward and reverse |
Mechanical Specs of Wheel Horse, Charger V7
- Two-wheel drive
- Open operator station.
Electrical System of Wheel Horse, Charger V7
| Ground | Negative |
|---|---|
| Battery AH | 24 |
| Battery volts | 12 |
| Charging system | Alternator |
| Charging amps | 3 |
Where it sits
With 7 HP, the Wheel Horse Charger V7 sits between Reo-matic 6 (6 HP) and 108 (8 HP) in Wheel Horse's range. Its power puts it in the 66th percentile of 1960s models in our database (550 machines).
Frequently asked questions
How much horsepower does the Wheel Horse Charger V7 have?
The Wheel Horse Charger V7 delivers 7 HP.
What years was the Wheel Horse Charger V7 produced?
The Wheel Horse Charger V7 was produced in 1968-1970.
What engine does the Wheel Horse Charger V7 have?
The Wheel Horse Charger V7 is powered by a Gasoline, 1-cylinder engine.
What transmission does the Wheel Horse Charger V7 use?
The Wheel Horse Charger V7 uses a Eaton 6 transmission.
How much does the Wheel Horse Charger V7 weigh?
The Wheel Horse Charger V7 weighs 410 lbs [185 kg].
Is the Wheel Horse Charger V7 4WD?
The Wheel Horse Charger V7 is available in 2WD.