Introduction
Production Information of Wheel Horse, D-250
The production information of the tractor (D-250) includes details about its manufacturing.
| Built in Bubingen, Germany |
| The Wheel Horse D-250 was built by Gutbrod of Germany and was similar to the Gutbrod 2500S. An adapter kit (8-3225) was available to convert the D-250's rear PTO to a standard 540 RPM clockwise rotation. |
| Garden tractor |
| $4,795 (1978 ) | |
| Distributor | Wheel Horse |
| Original price | $4,200 (1976 ) |
| Manufacturer | Gutbrod |
| $4,475 (1977 ) |
Dimension and Tires Information of Wheel Horse, D-250
This section sums up the dimension and tires information of the tractor.
| Wheelbase | 55 inches [139 cm] |
|---|---|
| Weight | 1160 lbs [526 kg] |
| Height | 45 inches [114 cm] |
| Length | 78 inches [198 cm] |
| Width | 44 inches [111 cm] |
| Ag front | 4.00-10 |
|---|---|
| Lawn/turf rear | 26x12.00-12 |
| Ag rear | 27x8.50-15 |
| Lawn/turf front | 18x8.50-8 |
Engine Specifications of Wheel Horse, D-250
Get the specifications for the engine and if different options are available.
| Liquid-cooled horizontal-shaft inline |
| 4-cylinder |
| Point gap | 0.018 inches [0.457 mm] |
|---|---|
| Air cleaner | Oil bath |
| Rated RPM | 3000 |
| Starter | Electric |
| Firing order | 1-3-4-2 |
| Displacement | 845 cc [51.57 ci] |
| Oil capacity | 2.6 qts [2.5 L] |
| Power (gross) | 19.9 hp [14.8 kW] |
| Bore/Stroke | 2.28x3.15 inches [58 x 80 mm] |
| Sparkplug gap | 0.020 inches [0.508 mm] |
| Sparkplug | Champion L87YC |
| Starter volts | 12 |
Transmission Information of Wheel Horse, D-250Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Four gears, plus reverse, in two ranges. |
| Manufacturer | Gutbrod |
|---|---|
| Clutch | Dry disc |
| Type | Gear |
| Gears | 8 forward and 2 reverse |
Mechanical Specs of Wheel Horse, D-250Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two-wheel drive |
| Open operator station. |
| Drum brakes |
| Manual steering |
| Differential lock | Mechanical rear |
|---|
Power Information of Wheel Horse, D-250Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Transmission |
|---|---|
| Clutch | Manual idler pulley |
| Front PTO | Independent |
| Rear PTO Type | 35mm |
| Engine RPM | 1500@3000 |
| Engine RPM | 1000@3000 (CCW) |
Hydraulics Specifications of Wheel Horse, D-250
Hydraulic system type, pressure, pump flow and valves.
| Capacity | 0.65 gal [2.5 L] |
|---|---|
| Total flow | 2.14 gpm [8.1 lpm] |
| Pressure | 2100 psi [144.8 bar] |
| Front valves | 2 |
Three-Point Hitch of Wheel Horse, D-250
Hitch category and rear/front lift capacity.
| Rear Type | 0 OptOptional |
|---|
Electrical System of Wheel Horse, D-250
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Battery AH | 18 |
Frequently asked questions
How much horsepower does the Wheel Horse D-250 have?
The Wheel Horse D-250 delivers 19 HP.
What years was the Wheel Horse D-250 produced?
The Wheel Horse D-250 was produced in 1976-1981.
What engine does the Wheel Horse D-250 have?
The Wheel Horse D-250 is powered by a 4-cylinder engine.
What transmission does the Wheel Horse D-250 use?
The Wheel Horse D-250 uses a Gear transmission.
How much does the Wheel Horse D-250 weigh?
The Wheel Horse D-250 weighs 1160 lbs [526 kg].
Is the Wheel Horse D-250 4WD?
The Wheel Horse D-250 is available in 2WD.
