AGCO LT95A tractor

AGCO LT95A

Power

115 hp

Production

2008-2010

Engine

Turbocharged intercooled diesel, 4-cylinder 16-valve

Transmission

Auto-4

Drive

2WD/4WD

From the same series:

LT85A

Introduction

AGCO SisuPower LT95A Utility Tractor

The AGCO LT95A is a utility tractor produced between 2008 and 2010 in Beauvais, France. Designed for versatile agricultural operations, this model integrates a high-performance drivetrain with robust hydraulic capabilities to support a variety of implements.

Engine and Performance

The tractor is powered by an AGCO SisuPower 44CTA engine, a 4.4-liter, 4-cylinder turbocharged and intercooled diesel unit. It generates a gross power output of 115 hp (85.8 kW) at a rated speed of 2200 RPM. The engine features a high-pressure common rail fuel system and Tier III emissions compliance, utilizing a grid heater for reliable cold-weather starting and a viscous fan drive for efficient cooling.

Transmission and Drivetrain

The LT95A utilizes an Auto-4 partial power shift transmission, providing 16 forward and 16 reverse gears. It includes four power shift gears across four ranges, managed by an electro-hydraulic power shuttle for efficient directional changes. The system uses an electro-hydraulic wet disc clutch for smooth engagement. Operators can choose between two-wheel and four-wheel drive configurations, supported by power steering and wet disc brakes for enhanced control.

Hydraulics and Hitch

The hydraulic system is designed for high-demand tasks, offering a standard pump flow of 26 gpm (98.4 lpm) with an optional closed-center configuration reaching up to 29 gpm (109.8 lpm). It operates at a pressure of 2900 psi (200.0 bar) and supports two to four valves. The rear hitch is a Category II type with electronic lower-link draft sensing, providing a lift capacity of 7,817 lbs (3545 kg) at 24 inches behind the lift point.

Operator Environment and Dimensions

The tractor is available with either a two-post foldable ROPS or an optional cab equipped with air conditioning. It features a wheelbase of 105 inches (266 cm) and a width of 79.3 inches (201 cm). Various tire configurations are available to accommodate different soil conditions and track requirements, with adjustable front and rear treads to optimize stability during field operations.

Conclusion

The AGCO LT95A is a well-engineered utility tractor suited for mixed-farming requirements. Its combination of a high-torque engine, versatile power-shuttle transmission, and substantial hydraulic capacity makes it a reliable choice for primary tillage, planting, and heavy-duty transport tasks.

Production Information of AGCO, LT95A

  • Utility tractor
  • Built in Beauvais, France
ManufacturerAGCO
Manufacturer(optional)$61,840 (2009 Cab 4WD )
Original price$45,415 (2009 ROPS 2WD )

Dimension and Tires Information of AGCO, LT95A

  • Flange rear axle
Front tread61 to 76 inches [154 to 193 cm (2WD)]
Wheelbase105 inches [266 cm]
Height (cab)109 inches [276 cm]
Height (ROPS)62.5 inches (folded) [158 cm]
Length172 inches [436 cm]
Front tread61 to 85 inches [154 to 215 cm (4WD)]
Width79.3 inches [201 cm]
Rear tread60 to 84 inches [152 to 213 cm]
4WD Optional tires (ag)Front: 14.9R24. Rear: 18.4R34
2WD Standard tires (ag)Front: 9.5L-15. Rear: 18.4R30
2WD Optional tires (ag)Front: 10.00-16. Rear: 16.9R34
2WD Optional tires (ag)Front: 9.5L-15. Rear: 16.9R34
4WD Standard tires (ag)Front: 13.6R24. Rear: 18.4R30
2WD Optional tires (ag)Front: 11.00-16. Rear: 16.9R38
2WD Optional tires (ag)Front: 10.00-16. Rear: 18.4R34
2WD Optional tires (ag)Front: 10.00-16. Rear: 18.4R30
4WD Optional tires (ag)Front: 14.9R28. Rear: 18.4R38
4WD Optional tires (ag)Front: 13.6R28. Rear: 16.9R38
4WD Optional tires (ag)Front: 13.6R24. Rear: 16.9R34
2WD Optional tires (ag)Front: 11.00-16. Rear: 18.4R38
2WD Optional tires (ag)Front: 11.00-16. Rear: 18.4R34

Engine Specifications of AGCO, LT95A

  • AGCO SisuPower 44CTA
  • Liquid-cooled
  • Turbocharged intercooled diesel
  • 4-cylinder 16-valve
Starter volts12
Power (gross)115 hp [85.8 kW]
Fuel systemHigh pressure common rail
Pre-heatingGrid heater
Cooling systemViscous fan drive
Displacement269 ci [4.4 L]
EmissionsTier III
Bore/Stroke4.252x4.724 inches [108 x 120 mm]
StarterElectric
Rated RPM2200
Compression18.5:1

Transmission Information of AGCO, LT95A

Transmission variants 1

  • Four power shift gears in four ranges with power shuttle.
TransmissionAuto-4
ClutchElectro-hydraulic wet disc
TypePartial power shift
Gears16 forward and reverse

Mechanical Specs of AGCO, LT95A

  • Two- or four-wheel drive
  • Wet disc brakes
  • Two-post foldable ROPS. Cab optional with air-conditioning.
  • Power steering
Trailer brakes(optional)Hydraulic
Final drivesInboard planetary

Power Information of AGCO, LT95A

Rear PTOIndependent
ClutchElectro hydraulic
Rear PTO Type540/1000

Hydraulics Specifications of AGCO, LT95A

TypeOpen center
Pump flow26 gpm [98.4 lpm]
Valves2 to 4
Valves(optional)Closed center
Valves(optional)15 gpm [56.8 lpm]
Pressure2900 psi [200.0 bar]

Closed-center

Low-flow option.

Three-Point Hitch of AGCO, LT95A

Rear TypeII
Rear Type(optional)9,187 lbs [4167 kg]
ControlElectronic lower-link draft sensing
Rear lift (at 24"/610mm)7,817 lbs [3545 kg]

Electrical System of AGCO, LT95A

GroundNegative
Battery volts12
Ccab Charging amps120
Charging systemAlternator
ROPS Charging amps80

Where it sits

With 115 HP, the AGCO LT95A sits just above LT90A (110 HP) in AGCO's range. Its power puts it in the 71th percentile of 2000s models in our database (2822 machines).

Frequently asked questions

How much horsepower does the AGCO LT95A have?

The AGCO LT95A delivers 115 HP.

What years was the AGCO LT95A produced?

The AGCO LT95A was produced in 2008-2010.

What engine does the AGCO LT95A have?

The AGCO LT95A is powered by a Turbocharged intercooled diesel, 4-cylinder 16-valve engine.

What transmission does the AGCO LT95A use?

The AGCO LT95A uses a Auto-4 transmission.

Is the AGCO LT95A 4WD?

The AGCO LT95A is available in 2WD/4WD.

Compare the AGCO LT95A with another model