Introduction
Production Information of Allis Chalmers, 6080
The production information of the tractor (6080) includes details about its manufacturing.
| Original price was $30,000 in 1985 |
| Row-Crop tractor |
| Built in West Allis, Wisconsin, USA |
| Manufacturer | Allis Chalmers |
|---|---|
| Total built | 6,698 |
Dimension and Tires Information of Allis Chalmers, 6080
This section sums up the dimension and tires information of the tractor.
| Ground clearance | 17.6 inches (4WD front axle) [44 cm] |
|---|---|
| Wheelbase | 96 inches (2WD) [243 cm] |
| Operating weight | 6,500 lbs (2WD ROPS) [2948 kg] |
| Width | 73.1 inches [185 cm] |
| 95.3 inches (4WD) [242 cm] | |
| 21.1 inches (2WD front axle) [53 cm] | |
| Ballasted weight | 11,790 lbs [5347 kg] |
| Length | 149.5 inches [379 cm] |
| 26.7 inches (rear axle) [67 cm] |
| Ag front | 7.50-16 (2WD) |
|---|---|
| 16.9-34 (4WD) | |
| 11.2-28 (4WD) | |
| Ag rear | 18.4-34 (2WD) |
Engine Specifications of Allis Chalmers, 6080
Get the specifications for the engine and if different options are available.
| Allis Chalmers 433TI |
| Liquid-cooled |
| Turbocharged intercooled diesel |
| 4-cylinder |
| Starter volts | 12 |
|---|---|
| Displacement | 200 ci [3.3 L] |
| Compression | 14.1:1 (early) |
| Bore/Stroke | 3.876x4.25 inches [98 x 108 mm] |
| Coolant capacity | 17 qts [16.1 L] |
| Oil capacity | 10 qts [9.5 L] |
| Rated RPM | 2300 |
| 15.5:1 (late) | |
| Air cleaner | Paper element with precleaner |
Transmission Information of Allis Chalmers, 6080Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Four gears in three ranges. Synchronized shifting using the clutch. |
| Type | Synchronized |
|---|---|
| Gears | 12 forward and 3 reverse |
| Oil capacity | 12 qts [11.4 L] |
Mechanical Specs of Allis Chalmers, 6080Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-post ROPS canopy. Optional cab and air-conditoning. |
| Differential hydraulic wet disc brakes |
| Drive | 4x2 2WD |
|---|---|
| 4x4 MFWD 4WD (optional) | |
| Steering | Hydrostatic power |
Power Information of Allis Chalmers, 6080Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 540/1000 |
Hydraulics Specifications of Allis Chalmers, 6080
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Total flow | 19 gpm [71.9 lpm] |
| Valves | 2 |
| Pump flow | 11.4 gpm [43.1 lpm] |
Three-Point Hitch of Allis Chalmers, 6080
Hitch category and rear/front lift capacity.
| Rear Type | II |
|---|---|
| Rear lift (at 24"/610mm) | 4,500 lbs [2041 kg] |
Electrical System of Allis Chalmers, 6080
Battery voltage, charging system and ground.
| Charging system | Alternator |
|---|---|
| Battery volts | 12 |
| 2 (optional) | |
| Charging amps | 72 |
| Batteries | 1 |
Frequently asked questions
How much horsepower does the Allis Chalmers 6080 have?
The Allis Chalmers 6080 delivers 93 hp[P] HP.
What years was the Allis Chalmers 6080 produced?
The Allis Chalmers 6080 was produced in 1980-1985.
What engine does the Allis Chalmers 6080 have?
The Allis Chalmers 6080 is powered by a Turbocharged intercooled diesel, 4-cylinder engine.
What transmission does the Allis Chalmers 6080 use?
The Allis Chalmers 6080 uses a Synchronized transmission.
How much does the Allis Chalmers 6080 weigh?
The Allis Chalmers 6080 weighs 6,500 lbs (2WD ROPS) [2948 kg].
Is the Allis Chalmers 6080 4WD?
The Allis Chalmers 6080 is available in 2WD/4WD.
