Allis Chalmers 7040 tractor

Allis Chalmers 7040

Power

151 hp[P] hp

Production

1975-1977

Engine

Turbocharged diesel, 6-cylinder

Transmission

Power Director

Weight

11,700 lbs [5307 kg]

Drive

2WD

From the same series:

Introduction

Allis Chalmers 7040 Row-Crop Tractor

The Allis Chalmers 7040 is a row-crop tractor produced between 1975 and 1977 at the manufacturer's facility in West Allis, Wisconsin. Designed for large-scale agricultural operations, this model occupies the 151 horsepower category within the Allis Chalmers lineup.

Engine and Performance

The tractor is powered by the Allis Chalmers 3500 Mark II, a 7.0-liter, 6-cylinder turbocharged diesel engine. It operates at a rated speed of 2300 RPM with a compression ratio of 16:1. The engine cooling system features a 29.3-liter capacity, with an optional coolant heater available for cold-weather operations.

Transmission and Drivetrain

The 7040 offers two partial power shift transmission configurations: a 20-speed forward and 4-reverse option, or a 12-speed forward and 2-reverse setup. Both systems utilize a combination of floor-mounted gear selectors and side-console range levers, with foot-operated controls for power shifting. Steering is managed via a hydrostatic power system, paired with differential hydraulic wet disc brakes.

Hydraulics and PTO

The hydraulic system is a closed-center design providing a total flow of 170.3 liters per minute, with a dedicated pump flow of 83.3 liters per minute. It includes two or three valve outlets for implement control. The rear independent power take-off (PTO) offers standard 540 and 1000 RPM speeds, with an optional 1000 RPM configuration available.

Operator Environment and Dimensions

The unit features the Acousta cab as standard, which includes heating, with air-conditioning and audio equipment offered as options. With an operating weight of 5,307 kg and a wheelbase of 269 cm, the machine provides stability for field work. Various rear tread widths ranging from 162 to 231 cm allow for adaptation to different row-crop configurations.

Conclusion

The Allis Chalmers 7040 is a heavy-duty row-crop tractor intended for primary tillage and large-scale field applications. Its combination of high-capacity hydraulics, partial power shift transmissions, and robust 6-cylinder power makes it suitable for demanding agricultural environments requiring sustained performance.

Production Information of Allis Chalmers, 7040

  • Row-Crop tractor
  • Built in West Allis, Wisconsin, USA
ManufacturerAllis Chalmers
Original price$24,550

Dimension and Tires Information of Allis Chalmers, 7040

Clearance (front axle)22.4 inches [56 cm]
Wheelbase106 inches [269 cm]
Operating weight11,700 lbs [5307 kg]
Operating weight(optional)119.5 inches (long axle) [303 cm]
Length173.6 inches [440 cm]
Clearance (rear axle)28 inches [71 cm]
Ballasted weight17,380 lbs [7883 kg]
Width95.5 inches [242 cm]
Rear tread64 to 91 inches [162 to 231 cm]
Front tread62 to 88 inches [157 to 223 cm]
Ag front11.00-16
Ag rear20.8-38
Ag rear(optional)14L-16.1
Ag rear18.4-38
Ag rear(optional)30.5-32
Ag rear(optional)23.1-34
Ag front10.00-16
Ag front(optional)16.9-38
Ag front(optional)15.5-38

Engine Specifications of Allis Chalmers, 7040

  • Allis Chalmers 3500 Mark II
  • Liquid-cooled
  • Turbocharged diesel
  • 6-cylinder
Starter volts12
Displacement426 ci [7.0 L]
Displacement(optional)Coolant heater (optional)
Bore/Stroke4.25x5.00 inches [108 x 127 mm]
Coolant capacity31 qts [29.3 L]
Oil capacity19 qts [18.0 L]
Rated RPM2300
Compression16:1
Pre-heatingEther

Transmission Information of Allis Chalmers, 7040

Transmission variants 1

  • Five gears, plus reverse, with two ranges (fast/slow) and high-low power shift. Floor-mounted shifter selects gear, side-console lever selects range. Foot-operated buttons control the Power Director power shift.
TransmissionPower Director
TypePartial power shift
Gears20 forward and 4 reverse

Transmission variants 2

  • Six gears in two ranges (slow/fast). Clutchless power shift between gears.
TransmissionPower Shift
TypePartial power shift
Gears12 forward and 2 reverse
  • 20-speed partial power shift
  • 12-speed partial power shift

Mechanical Specs of Allis Chalmers, 7040

  • Two-wheel drive
  • Acousta cab standard with heater, air-conditioning optional. Optional radio and 8-track tape player. Four-post ROPS canopy optional.
  • Differential hydraulic wet disc brakes
Differential lockPower standard
SteeringHydrostatic power

Power Information of Allis Chalmers, 7040

Rear PTOIndependent
Rear PTO Type540/1000
Rear PTO Type(optional)1000 (optional)

Hydraulics Specifications of Allis Chalmers, 7040

TypeClosed center
Total flow45 gpm [170.3 lpm]
Pump flow22 gpm [83.3 lpm]
Capacity24.1 gal [91.2 L]
Valves2 or 3

Three-Point Hitch of Allis Chalmers, 7040

Rear TypeIII/II

Electrical System of Allis Chalmers, 7040

Charging systemAlternator
Battery volts12

Where it sits

With 151 hp[P] HP, the Allis Chalmers 7040 sits between 7030 (145 HP) and 7045 (173 HP) in Allis Chalmers's range. Its power puts it in the 83th percentile of 1970s models in our database (1259 machines).

Frequently asked questions

How much horsepower does the Allis Chalmers 7040 have?

The Allis Chalmers 7040 delivers 151 hp[P] HP.

What years was the Allis Chalmers 7040 produced?

The Allis Chalmers 7040 was produced in 1975-1977.

What engine does the Allis Chalmers 7040 have?

The Allis Chalmers 7040 is powered by a Turbocharged diesel, 6-cylinder engine.

What transmission does the Allis Chalmers 7040 use?

The Allis Chalmers 7040 uses a Power Director transmission.

How much does the Allis Chalmers 7040 weigh?

The Allis Chalmers 7040 weighs 11,700 lbs [5307 kg].

Is the Allis Chalmers 7040 4WD?

The Allis Chalmers 7040 is available in 2WD.

Compare the Allis Chalmers 7040 with another model