Introduction
Case IH 695 Utility Tractor
The Case IH 695 is a utility tractor produced between 1991 and 1994 at the Doncaster facility in England. Designed for general agricultural tasks, this model serves as a mid-range machine in the Case IH lineup, bridging the gap between the 685 and 795 series.
Engine and Performance
The tractor is powered by a 3.9-liter, four-cylinder liquid-cooled Case IH diesel engine. It delivers a gross power output of 72 hp (53.7 kW) and a net power of 68 hp (50.7 kW) at a rated speed of 2400 RPM. The engine features a 16:1 compression ratio and utilizes dual paper elements for air filtration.
Transmission and Drivetrain
The 695 offers versatile transmission options to suit various field conditions, including a partially synchronized 8-speed, an 8-speed synchronized shuttle, a 16-speed partial power shift, and a 16-speed creeper transmission. All configurations utilize a dry disc clutch. The tractor is available in both two-wheel and four-wheel drive variants, featuring power steering and differential hydraulic wet disc brakes for reliable control.
Hydraulics and Hitch
Equipped with an open-center hydraulic system, the tractor provides a pump flow of 15.8 gpm (59.8 lpm) and a fluid capacity of 9 gallons (34.1 L). It includes one hydraulic valve as standard. The rear hitch is a Category II type with a lifting capacity of 3614 lbs (1639 kg), suitable for a wide array of implements.
Operator Environment
The machine comes standard with a two-post Roll-Over Protective Structure (ROPS). For increased operator comfort, a factory cab with optional air conditioning was available. The operator interface is designed for standard utility operations with manual controls and power-assisted steering.
Conclusion
The Case IH 695 is a robust, utilitarian tractor engineered for durability. Its wide selection of transmission types and hydraulic capacity make it a flexible choice for farmers requiring a reliable machine for daily field work and implement management.
Production Information of CaseIH, 695
- Original price was $24,800 in 1994
- Utility tractor
- Built in Doncaster, England
| Manufacturer | CaseIH |
|---|
Dimension and Tires Information of CaseIH, 695
| 4WD Clearance (front axle) | 14.5 inches [36 cm] |
|---|---|
| Wheelbase | 88.7 inches [225 cm] |
| Height (cab) | 100.4 inches [255 cm] |
| Height (ROPS) | 96.5 inches [245 cm] |
| Length | 142 inches [360 cm] |
| 2WD Clearance (front axle) | 20.8 inches [52 cm] |
| Width | 75 inches [190 cm] |
Width at minimum tread.
| Ag front | 7.50-16 |
|---|---|
| Ag rear | 14.9-24 |
Engine Specifications of CaseIH, 695
- Case IH
- Liquid-cooled
- Diesel
- 4-cylinder
| Coolant capacity | 14.5 qts [13.7 L] |
|---|---|
| Power (gross) | 72 hp [53.7 kW] |
| Air cleaner | Dual paper elements |
| Rated RPM | 2400 |
| Compression | 16:1 |
| Displacement | 238.8 ci [3.9 L] |
| Power (net) | 68 hp [50.7 kW] |
| Bore/Stroke | 3.875x5.06 inches [98 x 129 mm] |
| Oil capacity | 10.4 qts [9.8 L] |
| Starter volts | 12 |
| Idle RPM | 650-2705 |
Transmission Information of CaseIH, 695
Transmission variants 1
- Four gears with high, low, and reverse ranges. Synchronized shifts within high and low ranges.
| Type | Partially synchronized |
|---|---|
| Oil capacity | 36 qts [34.1 L] |
| Gears | 8 forward and 4 reverse |
| Clutch | Dry disc |
Transmission variants 2
- Four gears with high, low, and reverse ranges. Power shift between direct and lower speed in each gear.
| Type | Partial power shift |
|---|---|
| Gears | 16 forward and 8 reverse |
| Oil capacity | 36 qts [34.1 L] |
Transmission variants 3
- Four gears each in high and low ranges, both forward and reverse.
| Type | Synchronized shuttle |
|---|---|
| Gears | 8 forward and reverse |
| Oil capacity | 36 qts [34.1 L] |
Transmission variants 4
- Four gears with high, low, and reverse ranges plus direct or creeper mode.
| Type | Creeper |
|---|---|
| Gears | 16 forward and 8 reverse |
- 8-speed partially synchronized
- 16-speed creeper
- 16-speed partial power shift
- 8-speed synchronized shuttle
Mechanical Specs of CaseIH, 695
- Two- or four-wheel drive
- Two-post ROPS. Cab optional with air-conditioning.
- Power steering
- Differential hydraulic wet disc brakes
Power Information of CaseIH, 695
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 540/1000 |
Hydraulics Specifications of CaseIH, 695
| Type | Open center |
|---|---|
| Pump flow | 15.8 gpm [59.8 lpm] |
| Capacity | 9 gal [34.1 L] |
| Valves | 1 |
Three-Point Hitch of CaseIH, 695
| Rear Type | II |
|---|---|
| Rear lift | 3614 lbs [1639 kg] |
Electrical System of CaseIH, 695
| Ground | Negative |
|---|---|
| Charging system | Alternator |
| Battery volts | 12 |
Where it sits
With 72 HP, the CaseIH 695 sits between 595 (60 HP) and 685 (73 HP) in CaseIH's range. Its power puts it in the 49th percentile of 1990s models in our database (2097 machines).
Frequently asked questions
How much horsepower does the CaseIH 695 have?
The CaseIH 695 delivers 72 HP.
What years was the CaseIH 695 produced?
The CaseIH 695 was produced in 1991-1994.
What engine does the CaseIH 695 have?
The CaseIH 695 is powered by a Diesel, 4-cylinder engine.
What transmission does the CaseIH 695 use?
The CaseIH 695 uses a Partially synchronized transmission.
Is the CaseIH 695 4WD?
The CaseIH 695 is available in 2WD/4WD.