
CaseIH 7120
Power
166 hp[P] hp
Production
1987-1993
Engine
Turbocharged diesel, 6-cylinder 12-valve
Transmission
Full power shift
Drive
2WD/4WD
From the same series:
Introduction
Case IH 7120 Row-Crop Tractor
The Case IH 7120 is a row-crop tractor produced from 1987 to 1993 at the manufacturer's facility in Racine, Wisconsin. Positioned as a high-performance machine of its era, it was designed to meet the heavy-duty demands of agricultural operations, offering 166 horsepower and versatile transmission options.
Engine and Performance
The tractor is powered by an 8.3-liter, 6-cylinder, 12-valve turbocharged diesel engine. It features a liquid-cooled system with a viscous fan and a compression ratio of 17.3:1. Designed for long-term reliability, the engine includes dual paper element air cleaners and an ether starting aid for cold conditions, with optional block and oil pan heaters available for extreme environments.
Transmission and Drivetrain
The 7120 utilizes a full-range powershift transmission, operated by a single right-hand control lever. Standard configurations provide 18 forward and 2 reverse gears, with later models adding two additional reverse gears. An optional creeper range is available, expanding the configuration to 24 forward and 3 reverse speeds. The drivetrain is offered in a 4x2 2WD setup, with an optional 4x4 MFWD (Mechanical Front Wheel Drive) available for improved traction.
Hydraulics and Hitch
Equipped with a closed-center, pressure flow compensated (PFC) hydraulic system, the tractor delivers a pump flow of 22 gpm (83.3 lpm) and a total flow of 29 gpm (109.8 lpm) at a system pressure of 2600 psi. The rear hitch is a Category III/IIIN type, controlled by an electronic lower link system, providing a lift capacity of 8,300 lbs (3,764 kg) measured at 24 inches behind the hitch point.
Operator Environment
The machine is equipped with the Silent Guardian II Cab as standard, which incorporates air-conditioning to maintain operator comfort during extended field operations. Steering is facilitated by a hydrostatic power system, and the tractor utilizes differential hydraulic wet disc brakes for controlled deceleration.
Conclusion
The Case IH 7120 serves as a robust and adaptable power unit for medium to large-scale agricultural tasks. Its combination of a high-torque engine, multiple powershift transmission variants, and capable hydraulic system makes it suitable for a wide range of row-crop applications, particularly where precise speed control and consistent pulling power are required.
Production Information of CaseIH, 7120
- Row-Crop tractor
- Built in Racine, Wisconsin, USA
| Manufacturer | CaseIH |
|---|---|
| Original price | $76,000 (1993) |
Dimension and Tires Information of CaseIH, 7120
| Wheelbase | 118.3 inches [300 cm] |
|---|---|
| Height (cab) | 118.2 inches (2WD) [300 cm] |
| Clearance (drawbar) | 14.7 inches [37 cm] |
| Clearance (drawbar)(optional) | 197.7 inches (4WD) [502 cm] |
| Front tread | 60 to 86 inches [152 to 218 cm (2WD)] |
| Length | 191 inches (2WD) [485 cm] |
| Length(optional) | 117.4 inches (4WD) [298 cm] |
| Clearance (front axle) | 22.4 inches (2WD) [56 cm] |
| Clearance (front axle)(optional) | 16.6 inches (4WD) [42 cm] |
| Rear axle | 4 by 96 inches [101 by 2438 mm] |
| Rear axle | 4 by 112 inches [101 by 2844 mm] |
| Rear tread | 60 to 109 inches [152 to 276 cm] |
| Rear tread | 60 to 125 inches [152 to 317 cm] |
| Front tread | 60 to 95 inches [152 to 241 cm (4WD)] |
| Standard tires (ag) | Front: 11.00-16. Rear: 18.4R38 (2WD) |
|---|---|
| Standard tires (ag)(optional) | Front: 13.6R28. Rear: 18.4R38 (4WD) |
Engine Specifications of CaseIH, 7120
- Liquid-cooled vertical inline
- Turbocharged diesel
- 6-cylinder 12-valve
| Oil change | 250 h |
|---|---|
| Oil capacity | 21 qts [19.9 L] |
| Air cleaner | Dual paper elements |
| Coolant capacity | 30 qts [28.4 L] |
| Coolant capacity(optional) | Block heater (optional) |
| Coolant capacity(optional) | Oil pan heater (optional) |
| Pre-heating | Ether starting aid |
| Displacement | 504.5 ci [8.3 L] |
| Cooling system | Viscous fan |
| Bore/Stroke | 4.488x5.315 inches [114 x 135 mm] |
| Starter volts | 12 |
| Rated RPM | 2200 |
| Compression | 17.3:1 |
Transmission Information of CaseIH, 7120
Transmission variants 1
- Full-range power shift transmission operated with a single right-hand control lever.
| Manufacturer | CaseIH |
|---|---|
| Clutch | Hydraulic wet disc |
| Type | Full power shift |
| Gears | 18 forward and 2 reverse |
Transmission variants 2
- The optional creeper range adds an additional six forward gears and one reverse to the Magnum power shift transmission.
| Manufacturer | CaseIH |
|---|---|
| Clutch | Hydraulic wet disc |
| Type | Powershift with creeper |
| Gears | 24 forward and 3 reverse |
Transmission variants 3
- Starting with the 1990 model year an additional two reverse gears were added to the Magnum power shift transmission.
| Manufacturer | CaseIH |
|---|---|
| Clutch | Hydraulic wet disc |
| Type | Full power shift |
| Gears | 18 forward and 4 reverse |
- 18-speed full power shift
- 24-speed powershift with creeper
Mechanical Specs of CaseIH, 7120
- Silent Guardian II Cab standard with air-conditioning. Optional radio/tape deck.
- Differential hydraulic wet disc brakes
| Drive | 4x2 2WD |
|---|---|
| Drive(optional) | 4x4 MFWD 4WD optional |
| Steering | Hydrostatic power |
Power Information of CaseIH, 7120
| Rear PTO | Independent |
|---|---|
| Engine RPM | 1000@2200 |
| Engine RPM(optional) | 540/1000 (1.375) |
| Clutch | Wet disc |
| Rear PTO Type | 1000 (1.375) |
Hydraulics Specifications of CaseIH, 7120
| Type | Closed center pressure flow compensated (PFC) |
|---|---|
| Pump flow | 22 gpm [83.3 lpm] |
| Valves | 2 to 4 |
| Capacity | 50.5 gal [191.1 L] |
| Total flow | 29 gpm [109.8 lpm] |
| Pressure | 2600 psi [179.3 bar] |
Three-Point Hitch of CaseIH, 7120
| Rear Type | III/IIIN |
|---|---|
| Control | Electronic lower link |
| Rear lift (at 24"/610mm) | 8,300 lbs [3764 kg] |
Electrical System of CaseIH, 7120
| Ground | Negative |
|---|---|
| Battery CCA | 950 |
| Batteries | 2 |
| Charging system | Alternator |
| Battery volts | 12 |
| Charging amps | 110 |
Where it sits
With 166 hp[P] HP, the CaseIH 7120 sits between 7110 (144 HP) and 7220 (172 HP) in CaseIH's range. Its power puts it in the 85th percentile of 1980s models in our database (2052 machines).
Frequently asked questions
How much horsepower does the CaseIH 7120 have?
The CaseIH 7120 delivers 166 hp[P] HP.
What years was the CaseIH 7120 produced?
The CaseIH 7120 was produced in 1987-1993.
What engine does the CaseIH 7120 have?
The CaseIH 7120 is powered by a Turbocharged diesel, 6-cylinder 12-valve engine.
What transmission does the CaseIH 7120 use?
The CaseIH 7120 uses a Full power shift transmission.
Is the CaseIH 7120 4WD?
The CaseIH 7120 is available in 2WD/4WD.