CaseIH 9280
Power
375 hp
Production
1990-1995
Engine
Turbocharged aftercooled diesel, 6-cylinder
Transmission
Full power shift
Weight
29000 lbs [13154 kg]
Drive
4WD
From the same series:
Introduction
Production Information of CaseIH, 9280
The production information of the tractor (9280) includes details about its manufacturing.
| Original price was $135,000 in 1995 |
| Four-wheel Drive (4WD) tractor |
| Built in Fargo, North Dakota, USA |
| Manufacturer | CaseIH |
|---|
Dimension and Tires Information of CaseIH, 9280
This section sums up the dimension and tires information of the tractor.
| Wheelbase | 141.5 inches [359 cm] |
|---|---|
| Height (exhaust) | 163.9 inches [416 cm] |
| 163.9 inches (duals) [416 cm] | |
| Length | 279.5 inches [709 cm] |
| Weight | 29000 lbs [13154 kg] |
| Width | 96 inches (minimum) [243 cm] |
| Ag front | 24.5-32 |
|---|---|
| Ag rear | 24.5-32 |
Engine Specifications of CaseIH, 9280
Get the specifications for the engine and if different options are available.
| Cummins NTA-855 |
| Liquid-cooled |
| Turbocharged aftercooled diesel |
| 6-cylinder |
| Starter volts | 12 |
|---|---|
| Displacement | 855 ci [14.0 L] |
| Rated RPM | 2100 |
| Bore/Stroke | 5.50x6.00 inches [140 x 152 mm] |
| Coolant capacity | 66 qts [62.5 L] |
| Oil capacity | 44 qts [41.6 L] |
| Torque RPM | 1400 |
| Torque | 1266 lb-ft [1716.7 Nm] |
| Power | 375 hp [279.6 kW] |
Transmission Information of CaseIH, 9280Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Full power shift transmission operated with two right-hand levers; one for shifting gears and the other for forward/reverse. Skip-Shift feature allows the transmission to quickly shift from first into higher gears (4th, 6th, 8th). |
| Type | Full power shift |
|---|---|
| Gears | 12 forward and 3 reverse |
| Clutch | Hydraulic wet disc |
Transmission variants 2
| Three gears (1-3) plus reverse (R) in four ranges (A-D). Synchronized shifting between gears and ranges. |
| Transmission | SyncroShift |
|---|---|
| Clutch | Hydraulic wet disc |
| Type | Fully synchronized |
| Gears | 12 forward and 3 reverse |
| 12-speed full power shift |
| 12-speed fully synchronized |
Mechanical Specs of CaseIH, 9280Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Cab standard with air-conditioning. Optional deluxe cab adds side and rear window wipers plus internal storage compartments. |
| Steering | Hydrostatic power |
|---|
Power Information of CaseIH, 9280Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent OptOptional |
|---|---|
| Rear PTO Type | 1000 |
Hydraulics Specifications of CaseIH, 9280
Hydraulic system type, pressure, pump flow and valves.
| Type | Closed center |
|---|---|
| Powershift Total flow | 27 gpm [102.2 lpm] |
| Valves | 4 |
| Capacity | 26 gal [98.4 L] |
| SyncroShift Total flow | 30 gpm [113.6 lpm] |
| Pressure | 2500 psi [172.4 bar] |
Three-Point Hitch of CaseIH, 9280
Hitch category and rear/front lift capacity.
| Rear Type | III OptOptional |
|---|---|
| Rear lift | 14000 lbs [6350 kg] |
Electrical System of CaseIH, 9280
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
Frequently asked questions
How much horsepower does the CaseIH 9280 have?
The CaseIH 9280 delivers 375 HP.
What years was the CaseIH 9280 produced?
The CaseIH 9280 was produced in 1990-1995.
What engine does the CaseIH 9280 have?
The CaseIH 9280 is powered by a Turbocharged aftercooled diesel, 6-cylinder engine.
What transmission does the CaseIH 9280 use?
The CaseIH 9280 uses a Full power shift transmission.
How much does the CaseIH 9280 weigh?
The CaseIH 9280 weighs 29000 lbs [13154 kg].
Is the CaseIH 9280 4WD?
The CaseIH 9280 is available in 4WD.