Introduction
Case IH C60 Utility Tractor
The Case IH C60 is a utility tractor produced between 1998 and 2002 at the Doncaster facility in England. Part of the C-series, this model was designed to serve as a versatile machine for general farm operations.
Engine and Performance
The tractor is powered by a Perkins 903.27T engine, a 2.7-liter, 3-cylinder turbocharged diesel unit. It features mechanical direct injection and liquid cooling. The engine produces a net power of 60 hp (44.7 kW) at a rated speed of 2250 RPM, with a maximum torque of 180 lb-ft (244.1 Nm) reached at 1400 RPM.
Transmission and Drivetrain
The C60 offers several transmission configurations, including a standard 8-forward and 4-reverse gear setup or a 16-speed partial power shift transmission. A creeper option is also available for low-speed tasks. The drivetrain is offered in a 4x2 2WD configuration with an optional 4x4 MFWD (Mechanical Front Wheel Drive) system, utilizing a 12-inch dry disc clutch.
Hydraulics and Hitch
The hydraulic system is an open-center design providing a total flow of 15.7 gpm (59.4 lpm) at a pressure of 2500 psi (172.4 bar). It supports up to three valves. The rear three-point hitch is Category I/II with a standard lift capacity of 3,665 lbs (1662 kg), which can be upgraded to 5,097 lbs (2311 kg) with optional equipment.
Operator Environment and Mechanical Features
The tractor is equipped with hydrostatic power steering and differential hydraulic wet disc brakes. The operator platform features a two-post ROPS (Roll-Over Protective Structure) with a straddle platform. The independent rear PTO operates at 540 RPM, with an optional dual-shaft configuration providing both 540 and 1000 RPM capabilities.
Conclusion
The Case IH C60 is a robust utility tractor suited for general agricultural tasks, offering a balance of mechanical simplicity and performance flexibility through its various transmission and hydraulic options.
Production Information of CaseIH, C60
- Utility tractor
- Built in Doncaster, England
| Manufacturer | CaseIH |
|---|---|
| Original price | $22,400 (1999) |
Dimension and Tires Information of CaseIH, C60
| Wheelbase | 80.9 inches (2WD) [205 cm] |
|---|---|
| Wheelbase(optional) | 83.3 inches (4WD) [211 cm] |
| Ag front | 7.50-16 |
|---|---|
| Ag rear | 14.9-28 |
Engine Specifications of CaseIH, C60
- Perkins 903.27T
- Liquid-cooled
- Turbocharged diesel
- 3-cylinder
| Oil capacity | 8 qts [7.6 L] |
|---|---|
| Starter volts | 12 |
| Power (gross) | 64 hp [47.7 kW] |
| Oil change | 250 h |
| Air cleaner | Dual paper elements |
| Compression | 17.25:1 |
| Fuel system | Mechanical direct injection with 5-hole injectors |
| Displacement | 165 ci [2.7 L] |
| Power (net) | 60 hp [44.7 kW] |
| Bore/Stroke | 3.74x5.00 inches [95 x 127 mm] |
| Torque RPM | 1400 |
| Coolant capacity | 12.57 qts [11.9 L] |
| Torque | 180 lb-ft [244.1 Nm] |
| Rated RPM | 2250 |
Transmission Information of CaseIH, C60
Transmission variants 1
| Gears | 8 forward and 4 reverse |
|---|---|
| Gears(optional) | 38.6 qts (4WD) [36.5 L] |
| Clutch | 12-inch dry disc |
| Oil capacity | 36 qts (2WD) [34.1 L] |
Transmission variants 2
| Type | Partial power shift |
|---|---|
| Type(optional) | 38.6 qts (4WD) [36.5 L] |
| Oil capacity | 36 qts (2WD) [34.1 L] |
| Gears | 16 forward and 8 reverse |
| Clutch | 12-inch dry disc |
Transmission variants 3
| Gears | 8 forward and reverse |
|---|---|
| Oil capacity | 36 qts (2WD) [34.1 L] |
| Oil capacity(optional) | 38.6 qts (4WD) [36.5 L] |
Transmission variants 4
| Type | Creeper |
|---|---|
| Gears | 16 forward and 8 reverse |
- 8-speed
- 16-speed partial power shift
- 16-speed creeper
Mechanical Specs of CaseIH, C60
- Differential hydraulic wet disc brakes
- Two-post ROPS with straddle platform.
| Drive | 4x2 2WD |
|---|---|
| Steering | Hydrostatic power |
| Steering(optional) | 4x4 MFWD 4WD (optional) |
| Differential lock | Mechanical |
Power Information of CaseIH, C60
| Rear PTO | Independent |
|---|---|
| Rear PTO(optional) | 540/1000 (optional dual shaft) |
| Clutch | Hydraulic wet disc |
| Rear PTO Type | 540 |
Hydraulics Specifications of CaseIH, C60
| Total flow | 15.7 gpm [59.4 lpm] |
|---|---|
| Type | Open center |
| Valves | 0 to 3 |
| Pressure | 2500 psi [172.4 bar] |
| Capacity | 9 gal (2WD) [34.1 L] |
| Pump flow | 12.7 gpm [48.1 lpm] |
| Pump flow(optional) | 9.7 gal (4WD) [36.7 L] |
Three-Point Hitch of CaseIH, C60
| Rear Type | II/I |
|---|---|
| Rear Type(optional) | 5,097 lbs (optional) [2311 kg] |
| Control | Mechanical |
| Rear lift | 3,665 lbs [1662 kg] |
Electrical System of CaseIH, C60
| Ground | Negative |
|---|---|
| Ground(optional) | 810 (optional) |
| Battery CCA | 650 |
| Charging system | Alternator |
| Battery volts | 12 |
| Charging amps | 65 |
Where it sits
With 64 HP, the CaseIH C60 sits between C50 (53 HP) and C70 (73 HP) in CaseIH's range. Its power puts it in the 41th percentile of 1990s models in our database (2097 machines).
Frequently asked questions
How much horsepower does the CaseIH C60 have?
The CaseIH C60 delivers 64 HP.
What years was the CaseIH C60 produced?
The CaseIH C60 was produced in 1998-2002.
What engine does the CaseIH C60 have?
The CaseIH C60 is powered by a Turbocharged diesel, 3-cylinder engine.
Is the CaseIH C60 4WD?
The CaseIH C60 is available in 2WD/4WD.