CaseIH Farmall 105A
Power
112 hp
Production
2020+
Engine
Turbocharged aftercooled diesel, 4-cylinder
Transmission
Power shuttle
Drive
2WD/4WD
From the same series:
Introduction
Case IH Farmall 105A: Utility Tractor
The Case IH Farmall 105A is a utility tractor produced from 2020 onwards, designed to provide consistent performance for various agricultural operations. It belongs to the Farmall A series, known for its functional design and adaptability to diverse farm tasks.
Engine and Power
The tractor is powered by an FPT F5G 4-cylinder turbocharged and aftercooled diesel engine. With a displacement of 3.4 liters, it delivers a rated power of 112 hp (83.5 kW) at 2300 RPM. The fuel system utilizes an electronic high-pressure common rail direct injection design, and the engine meets Tier IV emissions standards. Cooling is managed by a liquid-cooled system.
Transmission and Drivetrain
The machine offers two transmission configurations to suit operational requirements: a 12-speed power shuttle or a 20-speed creeper transmission. These options allow for precise speed control during field work. The tractor is available in both two-wheel drive and four-wheel drive configurations, featuring power steering and wet disc brakes for enhanced control and safety.
Hydraulics and Hitch
The hydraulic system is of the open-center type, providing a standard pump flow of 16.9 gpm (64.0 lpm), with an optional capacity of 21.6 gpm (81.8 lpm). It supports two or three rear valves for implement operation. The rear Category II/I three-point hitch is controlled via top-link draft sensing, offering a lift capacity of 3200 lbs (1451 kg) at 24 inches behind the lift points.
Operator Environment and Dimensions
The tractor is configured with a two-post folding ROPS as standard, with an air-conditioned cab available as an option. Depending on the configuration, the wheelbase ranges from 89 to 91 inches. The vehicle is equipped with a 12-volt electrical system featuring an alternator charging system.
Conclusion
The Case IH Farmall 105A is a versatile utility tractor suited for general agricultural duties, ranging from transport to implement handling. Its combination of mechanical simplicity, multiple transmission choices, and flexible hydraulic configurations allows it to address the varying needs of modern farming operations.
Production Information of CaseIH, Farmall 105A
- Utility tractor
| Manufacturer | CaseIH |
|---|
Dimension and Tires Information of CaseIH, Farmall 105A
- Flange rear axle
| Height (cab) | 106 inches [269 cm] |
|---|---|
| 2WD Wheelbase | 91 inches [231 cm] |
| 4WD Length | 161 inches [408 cm] |
| 2WD Length | 162 inches [411 cm] |
| 4WD ROPS Wheelbase | 84 inches [213 cm] |
| Height (ROPS) | 103 inches [261 cm] |
| 4WD Cab Wheelbase | 89 inches [226 cm] |
| 2WD Standard tires (ag) | Front: 10.00-16. Rear: 18.4-30 |
|---|---|
| 4WD Optional tires (ag) | Front: 10-16. Rear: 16.9-34 |
| 4WD Standard tires (ag) | Front: 12.4-24. Rear: 18.4-30 |
| 2WD Optional tires (ag) | Front: 7.5-16. Rear: 16.9-30 |
Engine Specifications of CaseIH, Farmall 105A
- FPT F5G
- Liquid-cooled
- Turbocharged aftercooled diesel
- 4-cylinder
| Starter | Electric |
|---|---|
| Displacement | 207 ci [3.4 L] |
| Power | 112 hp [83.5 kW] |
| Bore/Stroke | 3.90x4.33 inches [99 x 110 mm] |
| Starter volts | 12 |
| Rated RPM | 2300 |
| Fuel system | Electronic high-pressure common rail direct injection |
| Emissions | Tier IV |
Transmission Information of CaseIH, Farmall 105A
Transmission variants 1
| Type | Power shuttle |
|---|---|
| Gears | 12 forward and reverse |
Transmission variants 2
| Type | Creeper |
|---|---|
| Gears | 20 forward and reverse |
- 12-speed power shuttle
- 20-speed creeper
Mechanical Specs of CaseIH, Farmall 105A
- Two- or four-wheel drive
- Two-post folding ROPS. Cab optional with air-conditioning.
- Wet disc brakes
- Power steering
| Final drives | Inboard planetary |
|---|
Power Information of CaseIH, Farmall 105A
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 540 (1.375) |
| Rear PTO Type(optional) | 540/1000 (1.375) |
Hydraulics Specifications of CaseIH, Farmall 105A
| Type | Open center |
|---|---|
| Type(optional) | 21.6 gpm [81.8 lpm] |
| Rear valves | 2 or 3 |
| Pump flow | 16.9 gpm [64.0 lpm] |
Three-Point Hitch of CaseIH, Farmall 105A
| Rear Type | II/I |
|---|---|
| Rear Type(optional) | 7716 lbs [3499 kg] |
| Rear lift (at 24"/610mm) | 3200 lbs [1451 kg] |
| Control | Top-link draft sensing |
| Rear lift (at ends) | 4409 lbs [1999 kg] |
Electrical System of CaseIH, Farmall 105A
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Charging system | Alternator |
| Charging amps | 120 |
Where it sits
With 112 HP, the CaseIH Farmall 105A sits between Farmall 95A (97 HP) and Farmall 115A (120 HP) in CaseIH's range. Its power puts it in the 62th percentile of 2020s models in our database (1464 machines).
Frequently asked questions
How much horsepower does the CaseIH Farmall 105A have?
The CaseIH Farmall 105A delivers 112 HP.
What years was the CaseIH Farmall 105A produced?
The CaseIH Farmall 105A was produced in 2020+.
What engine does the CaseIH Farmall 105A have?
The CaseIH Farmall 105A is powered by a Turbocharged aftercooled diesel, 4-cylinder engine.
What transmission does the CaseIH Farmall 105A use?
The CaseIH Farmall 105A uses a Power shuttle transmission.
Is the CaseIH Farmall 105A 4WD?
The CaseIH Farmall 105A is available in 2WD/4WD.