CaseIH Farmall 110C
Power
107 hp
Production
2015-2025
Engine
4-cylinder
Transmission
Mechanical shuttle
Drive
2WD/4WD
From the same series:
Introduction
Case IH Farmall 110C utility tractor
The Case IH Farmall 110C is a utility tractor produced between 2015 and 2025 as part of the Farmall C series. It is designed to serve as a versatile platform for a variety of agricultural tasks, ranging from field work to general farm maintenance.
Engine and Powertrain
The tractor is powered by an FPT 4-cylinder engine with a 3.4-liter displacement. It utilizes wastegate turbocharging and aftercooling, supported by a high-pressure common rail electronic direct injection system. The engine produces 107 horsepower (gross) and complies with Tier 4 emission standards through the use of selective catalytic reduction (SCR) and cooled exhaust-gas recirculation.
Transmission and Drivetrain
Multiple transmission configurations are available to suit operational requirements, including a 12-speed mechanical shuttle, a 12-speed power shuttle, and a 24-speed transmission with a two-speed high-low shift. The vehicle is offered in both two-wheel drive and four-wheel drive configurations, featuring power steering and wet disc brakes for control.
Hydraulics and Hitch
The hydraulic system utilizes an open-center design with a pump flow of 16.9 gpm (60.6 lpm) and can be equipped with two or three valves. The rear hitch is a Category II/I system with top link draft sensing, providing a lift capacity of 4,339 lbs at 24 inches. It is complemented by a swinging extendable drawbar.
Operator Environment and Dimensions
The tractor is available with a two-post ROPS or an optional climate-controlled cab. Its physical dimensions include a 4WD wheelbase of 90 inches and a total length of 160.1 inches for the 4WD model. Various agricultural tire options are available to match the specific drive configuration and traction needs of the user.
Conclusion
The Farmall 110C is a multi-purpose utility tractor suited for farmers requiring a balance of mechanical simplicity and modern engine technology. Its range of transmission options and hydraulic capabilities make it adaptable to diverse implement management tasks.
Production Information of CaseIH, Farmall 110C
- Utility tractor
| Manufacturer | CaseIH (a part of CNH) |
|---|---|
| Manufacturer(optional) | $80,543 (2016 Hi-Lo Cab 4WD ) |
| Original price | $55,747 (2016 mech-shuttle ROPS 2WD ) |
Dimension and Tires Information of CaseIH, Farmall 110C
- Flange rear axle
| Height (cab) | 102.1 inches [259 cm] |
|---|---|
| 2WD Wheelbase | 92.2 inches [234 cm] |
| Width | 75.7 inches [192 cm] |
| 4WD Length | 160.1 inches [406 cm] |
| 4WD Wheelbase | 90 inches [228 cm] |
| Height (ROPS) | 106.5 inches [270 cm] |
| 2WD Length | 163.1 inches [414 cm] |
| 2WD Standard tires (ag) | Front: 7.50x16. Rear: 16.9R30 |
|---|---|
| 4WD Standard tires (ag) | Front: 11.2R24. Rear: 16.9R30 |
| 4WD Standard tires (ag) | Front: 14.9R24. Rear: 18.4R34 |
Engine Specifications of CaseIH, Farmall 110C
- FPT
- Liquid-cooled
- Wastegate turbocharged and aftercooled
- 4-cylinder
| Starter | Electric |
|---|---|
| Displacement | 207 ci [3.4 L] |
| Emission control | Selective catalytic reduction with cooled exhaust-gas recirculation (SCR) |
| Bore/Stroke | 3.90x4.33 inches [99 x 110 mm] |
| Starter volts | 12 |
| Fuel system | High pressure common rail electronic direct injection |
| Power (gross) | 107 hp [79.8 kW] |
| Emissions | Tier 4 |
Transmission Information of CaseIH, Farmall 110C
Transmission variants 1
- Four synchronized gears in three non-synchronized ranges with mechanical shuttle shift.
| Type | Mechanical shuttle |
|---|---|
| Gears | 12 forward and reverse |
Transmission variants 2
- Four synchronized gears in three non-synchronized ranges with power shuttle shift.
| Type | Power shuttle |
|---|---|
| Gears | 12 forward and reverse |
Transmission variants 3
- Four synchronized gears in three non-synchronized ranges with power shuttle shift and two-speed high-low shift.
| Gears | 24 forward and reverse |
|---|
- 12-speed mechanical shuttle
- 12-speed power shuttle
- 24-speed
Mechanical Specs of CaseIH, Farmall 110C
- Two- or four-wheel drive
- Two-post ROPS. Cab optional with air-conditioning.
- Wet disc brakes
- Power steering
| Final drives | Inboard planetary |
|---|
Power Information of CaseIH, Farmall 110C
| Rear PTO | Independent |
|---|---|
| Rear PTO(optional) | 540/1000 |
| Rear PTO Type | 540 |
| Rear PTO Type(optional) | 540/540E |
Hydraulics Specifications of CaseIH, Farmall 110C
| Type | Open center |
|---|---|
| Valves | 2 or 3 |
| Pump flow | 16..9 gpm [60.6 lpm] |
Three-Point Hitch of CaseIH, Farmall 110C
| Rear Type | II/I |
|---|---|
| Rear Arms | Telescopic link ends |
| Rear Arms(optional) | 5620 lbs [2549 kg] |
| Control | Top link draft sensing |
| Drawbar | Swinging extendable drawbar |
| Rear lift (at 24"/610mm) | 4339 lbs [1968 kg] |
Electrical System of CaseIH, Farmall 110C
| Ground | Negative |
|---|---|
| Charging system | Alternator |
| Battery volts | 12 |
Where it sits
With 107 HP, the CaseIH Farmall 110C sits between Farmall 105C (106 HP) and Farmall 120C (117 HP) in CaseIH's range. Its power puts it in the 63th percentile of 2010s models in our database (2476 machines).
Frequently asked questions
How much horsepower does the CaseIH Farmall 110C have?
The CaseIH Farmall 110C delivers 107 HP.
What years was the CaseIH Farmall 110C produced?
The CaseIH Farmall 110C was produced in 2015-2025.
What engine does the CaseIH Farmall 110C have?
The CaseIH Farmall 110C is powered by a 4-cylinder engine.
What transmission does the CaseIH Farmall 110C use?
The CaseIH Farmall 110C uses a Mechanical shuttle transmission.
Is the CaseIH Farmall 110C 4WD?
The CaseIH Farmall 110C is available in 2WD/4WD.