Introduction
Production Information of CaseIH, Farmall 80N
The production information of the tractor (Farmall 80N) includes details about its manufacturing.
| Orchard/Vineyard tractor |
| Manufacturer | CaseIH |
|---|---|
| $74,956 (2019 Hi-Lo Cab 4WD ) | |
| Original price | $58,795 (2019 Syncro ROPS 2WD ) |
Dimension and Tires Information of CaseIH, Farmall 80N
This section sums up the dimension and tires information of the tractor.
| Flange rear axle |
| Ground clearance | 11.2 inches [28 cm] |
|---|---|
| Wheelbase | 96 inches [243 cm] |
| Height (ROPS) | 90 inches [228 cm] |
| Width | 52.9 inches [134 cm] |
| ROPS Length | 148.8 inches [377 cm] |
| Height (cab) | 91.7 inches [232 cm] |
| Cab Length | 159 inches [403 cm] |
| 2WD Standard tires (ag) | Front: 6.00-16. Rear: 14.9R28 |
|---|---|
| 4WD Standard tires (ag) | Front: 7.50R18. Rear: 14.9R28 |
Engine Specifications of CaseIH, Farmall 80N
Get the specifications for the engine and if different options are available.
| FPT |
| Liquid-cooled |
| Turbocharged aftercooled diesel |
| 4-cylinder |
| Starter | Electric |
|---|---|
| Displacement | 207 ci [3.4 L] |
| Power (gross) | 74 hp [55.2 kW] |
| Bore/Stroke | 3.90x4.33 inches [99 x 110 mm] |
| Starter volts | 12 |
| Rated RPM | 2300 |
| Fuel system | Electronic high-pressure common rail |
| Emissions | Interim Tier IV |
Transmission Information of CaseIH, Farmall 80NY
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Four synchronized gears in four non-synchronized ranges with mechanical shuttle. |
| Type | Partially synchronized |
|---|---|
| Gears | 16 forward and reverse |
Transmission variants 2
| Type | Power shift |
|---|---|
| Gears | 16 forward and reverse |
Transmission variants 3
| Type | Hi-Lo power shift |
|---|---|
| Gears | 32 forward and 16 reverse |
| 16-speed partially synchronized |
| 16-speed power shift |
| 32-speed Hi-Lo power shift |
Mechanical Specs of CaseIH, Farmall 80NY
This section summarizes all mechanical information such as the brake system and other specifications.
| Two- or four-wheel drive |
| Two-post ROPS. Cab optional with air-conditioning. |
| Wet disc brakes |
| Power steering |
| Final drives | Inboard planetary |
|---|
Power Information of CaseIH, Farmall 80NY
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 540/540E |
| 540/1000 OptOptional |
Hydraulics Specifications of CaseIH, Farmall 80N
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| 21.1 gpm*Optional with cab. [79.9 lpm] | |
| Pump flow | 16.9 gpm [64.0 lpm] |
| Rear valves | 2 or 3 |
| Steering flow | 11.4 gpm [43.1 lpm] |
| Mid valves | 2 OptOptional |
Three-Point Hitch of CaseIH, Farmall 80N
Hitch category and rear/front lift capacity.
| Rear Type | II/I |
|---|---|
| Front Hitch | Optional |
| Rear lift (at ends) | 5732 lbs [2600 kg] |
| Rear lift (at 24"/610mm) | 3780 lbs [1714 kg] |
Electrical System of CaseIH, Farmall 80N
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Charging system | Alternator |
| Charging amps | 120 |
Frequently asked questions
How much horsepower does the CaseIH Farmall 80N have?
The CaseIH Farmall 80N delivers 74 HP.
What years was the CaseIH Farmall 80N produced?
The CaseIH Farmall 80N was produced in 2017+.
What engine does the CaseIH Farmall 80N have?
The CaseIH Farmall 80N is powered by a Turbocharged aftercooled diesel, 4-cylinder engine.
What transmission does the CaseIH Farmall 80N use?
The CaseIH Farmall 80N uses a Partially synchronized transmission.
Is the CaseIH Farmall 80N 4WD?
The CaseIH Farmall 80N is available in 2WD/4WD.