Introduction
Case IH JX1075N Orchard and Vineyard Tractor
The Case IH JX1075N is a narrow-profile tractor manufactured between 2005 and 2008, specifically engineered for orchard and vineyard operations. It belongs to the JX series and serves as a specialized tool for working in confined spaces where maneuverability and precise control are essential requirements.
Engine and Performance
The tractor is powered by a 2.9-liter, 3-cylinder turbocharged diesel engine. It generates a gross power output of 75 hp (55.9 kW) at a rated speed of 2300 RPM. The engine features liquid cooling and a mechanical direct injection fuel system, producing a maximum torque of 221 lb-ft (299.7 Nm) at 1400 RPM, providing consistent lugging ability for specialized implements.
Transmission and Drivetrain
The JX1075N utilizes a mechanical shuttle transmission with 16 forward and 16 reverse gears. The system consists of four synchronized gears across four ranges, allowing for a wide selection of working speeds. The drivetrain is completed by a mechanical dry disc clutch and is available in either two-wheel or four-wheel drive configurations.
Hydraulics and Hitch
Equipped with an open-center hydraulic system, the tractor offers a total flow of 18.9 gpm (71.5 lpm) for 2WD models and 23.4 gpm (88.6 lpm) for 4WD models, operating at a pressure of 2610 psi (180.0 bar). The rear hitch is a Category II type with mechanical lower-link draft sensing, capable of lifting up to 3962 lbs (1797 kg).
Dimensions and Operator Environment
Designed for narrow row work, the tractor features a width of approximately 53 inches (134-135 cm) depending on the drive configuration. The ground clearance is 10.5 inches (26 cm). The operator station is equipped with a two-post mid-mount foldable ROPS as standard, with a cab option available for enhanced protection.
Conclusion
The Case IH JX1075N is a specialized utility tractor tailored for high-value crop production. Its combination of narrow dimensions, independent 540 RPM rear PTO, and versatile hydraulic capacity makes it a suitable machine for orchard maintenance and vineyard management tasks.
Production Information of CaseIH, JX1075N
- Orchard/Vineyard tractor
| Manufacturer | CaseIH |
|---|
Dimension and Tires Information of CaseIH, JX1075N
| Ground clearance | 10.5 inches [26 cm] |
|---|---|
| 2WD Wheelbase | 80.1 inches [203 cm] |
| 2WD Width | 52.9 inches [134 cm] |
| 4WD Length | 153.5 inches [389 cm] |
| 4WD Wheelbase | 81.1 inches [205 cm] |
| 4WD Width | 53.4 inches [135 cm] |
| 2WD Length | 152 inches [386 cm] |
Engine Specifications of CaseIH, JX1075N
- Case IH
- Liquid-cooled
- Turbocharged diesel
- 3-cylinder
| Torque | 221 lb-ft [299.7 Nm] |
|---|---|
| Displacement | 179 ci [2.9 L] |
| Power (gross) | 75 hp [55.9 kW] |
| Bore/Stroke | 3.88x5.06 inches [99 x 129 mm] |
| Starter volts | 12 |
| Torque RPM | 1400 |
| Rated RPM | 2300 |
| Fuel system | Mechanical direct injection |
| Emissions | Tier II |
Transmission Information of CaseIH, JX1075N
Transmission variants 1
- Four synchronized gears in four ranges with mechanical shuttle.
| Type | Mechanical shuttle |
|---|---|
| Gears | 16 forward and reverse |
Mechanical Specs of CaseIH, JX1075N
- Two- or four-wheel drive
- Two-post mid-mount foldable ROPS. Cab optional.
- Power steering
- Hydraulic wet disc brakes
Power Information of CaseIH, JX1075N
| Rear PTO | Independent |
|---|---|
| Clutch | Mechanical dry disc |
| Rear PTO Type | 540 |
Hydraulics Specifications of CaseIH, JX1075N
| 4WD Total flow | 23.4 gpm [88.6 lpm] |
|---|---|
| Type | Open center |
| 4WD Pump flow | 16.9 gpm [64.0 lpm] |
| 2WD Pump flow | 12.4 gpm [46.9 lpm] |
| Pressure | 2610 psi [180.0 bar] |
| Steering flow | 6.5 gpm [24.6 lpm] |
| 2WD Total flow | 18.9 gpm [71.5 lpm] |
| Rear valves | 2 |
Three-Point Hitch of CaseIH, JX1075N
| Rear Type | II |
|---|---|
| Control | Mechanical lower-link draft sensing |
| Rear lift | 3962 lbs [1797 kg] |
Electrical System of CaseIH, JX1075N
| Ground | Negative |
|---|---|
| Battery CCA | 730 |
| Cab Charging amps | 65 |
| Charging system | Alternator |
| Battery volts | 12 |
| ROPS Charging amps | 45 |
Where it sits
With 75 HP, the CaseIH JX1075N sits just below Farmall 75N (76 HP) in CaseIH's range. Its power puts it in the 50th percentile of 2000s models in our database (2822 machines).
Frequently asked questions
How much horsepower does the CaseIH JX1075N have?
The CaseIH JX1075N delivers 75 HP.
What years was the CaseIH JX1075N produced?
The CaseIH JX1075N was produced in 2005-2008.
What engine does the CaseIH JX1075N have?
The CaseIH JX1075N is powered by a Turbocharged diesel, 3-cylinder engine.
What transmission does the CaseIH JX1075N use?
The CaseIH JX1075N uses a Mechanical shuttle transmission.
Is the CaseIH JX1075N 4WD?
The CaseIH JX1075N is available in 2WD/4WD.