
CaseIH MX285
Power
287 hp
Production
2003-2006
Engine
Turbocharged diesel, 6-cylinder 24-valve
Transmission
Full power shift
Drive
4WD
From the same series:
Introduction
Production Information of CaseIH, MX285
The production information of the tractor (MX285) includes details about its manufacturing.
| Row-Crop tractor |
| Built in Racine, Wisconsin, USA |
| Manufacturer | CaseIH (a part of CNH) |
|---|
Dimension and Tires Information of CaseIH, MX285
This section sums up the dimension and tires information of the tractor.
| Wheelbase | 118.3 inches [300 cm] |
|---|---|
| Front tread | 60 to 88 inches [152 to 223 cm] |
| Rear axle | 4.5 by 120 inches [114 by 3048 mm] |
| Height (cab) | 124.6 inches [316 cm] |
| Rear axle | 4 by 120 inches [101 by 3048 mm] |
No data available
Engine Specifications of CaseIH, MX285
Get the specifications for the engine and if different options are available.
| Liquid-cooled inline |
| 6-cylinder 24-valve |
| Turbocharged diesel |
| Coolant capacity | 24 qts [22.7 L] |
|---|---|
| Oil capacity | 22 qts [20.8 L] |
| Power | 287 hp [214.0 kW] |
| Rated RPM | 2000 |
| Compression | 17.0:1 |
| Displacement | 504.5 ci [8.3 L] |
| Emissions | Tier II |
| Air cleaner | Dual paper elements |
| Bore/Stroke | 4.488x5.315 inches [114 x 135 mm] |
| Starter volts | 12 |
| Torque RPM | 1400 |
| Torque | 1853 lb-ft [2512.7 Nm] |
Transmission Information of CaseIH, MX285Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Full power shift |
|---|---|
| Gears | 18 forward and 4 reverse |
| Clutch | Electro-hydraulic wet discs |
Mechanical Specs of CaseIH, MX285Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Surveyor Cab standard with air-conditioning. Optional automatic climate control. |
| Differential hydraulic wet disc brakes |
| Steering | Hydrostatic power |
|---|
Power Information of CaseIH, MX285Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 1000 (1.75) |
| 540/1000 (1.375 optional) |
Hydraulics Specifications of CaseIH, MX285
Hydraulic system type, pressure, pump flow and valves.
| Type | Closed center pressure flow compensated with parallel priority (PFC) |
|---|---|
| Total flow | 38.6 gpm [146.1 lpm] |
| Valves | 3 to 5 |
| Capacity | 45.5 gal [172.2 L] |
| 53.1 gpm (optional) [201.0 lpm] | |
| Pressure | 2950 psi [203.4 bar] |
Three-Point Hitch of CaseIH, MX285
Hitch category and rear/front lift capacity.
| Rear Type | III/IIIN |
|---|---|
| Front Hitch | Optional |
| 17,920 lbs (optional) [8128 kg] | |
| Control | Electronic draft control |
| Front lift | 7,170 lbs [3252 kg] |
| Rear lift | 14,970 lbs [6790 kg] |
Electrical System of CaseIH, MX285
Battery voltage, charging system and ground.
| Battery volts | 12 |
|---|---|
| Ground | Negative |
| Batteries | 2 |
| Charging volts | 12 |
| Charging system | Alternator |
| Battery CCA | 1000 |
| Charging amps | 135 |
Frequently asked questions
How much horsepower does the CaseIH MX285 have?
The CaseIH MX285 delivers 287 HP.
What years was the CaseIH MX285 produced?
The CaseIH MX285 was produced in 2003-2006.
What engine does the CaseIH MX285 have?
The CaseIH MX285 is powered by a Turbocharged diesel, 6-cylinder 24-valve engine.
What transmission does the CaseIH MX285 use?
The CaseIH MX285 uses a Full power shift transmission.
Is the CaseIH MX285 4WD?
The CaseIH MX285 is available in 4WD.