CaseIH Steiger 400
Power
400 hp
Production
2011-2013
Engine
Wastegate turbocharged aftercooled diesel, 6-cylinder 24-valve
Transmission
Full power shift
Weight
36,048 lbs (dual 710/70R42) [16351 kg]
Drive
4WD
From the same series:
Introduction
Production Information of CaseIH, Steiger 400
The production information of the tractor (Steiger 400) includes details about its manufacturing.
| Four-wheel Drive (4WD) tractor |
| Built in Fargo, North Dakota, USA |
| Manufacturer | CaseIH |
|---|
Dimension and Tires Information of CaseIH, Steiger 400
This section sums up the dimension and tires information of the tractor.
| Wheelbase | 148 inches [375 cm] |
|---|---|
| Front axle | 5 by 120 inches [127 by 3048 mm] |
| Weight | 36,048 lbs (dual 710/70R42) [16351 kg] |
| Ballasted weight | 49,500 lbs [22453 kg] |
No data available
Engine Specifications of CaseIH, Steiger 400
Get the specifications for the engine and if different options are available.
| Iveco |
| Liquid-cooled |
| Wastegate turbocharged aftercooled diesel |
| 6-cylinder 24-valve |
| Rated RPM | 2100 |
|---|---|
| Displacement | 787 ci [12.9 L] |
| Emission control | Selective catalytic reduction (SCR) |
| Bore/Stroke | 5.315x5.906 inches [135 x 150 mm] |
| Starter type | Electric |
| Maximum Power | 440 hp [328.1 kW] |
| Power | 400 hp [298.3 kW] |
| Emissions | Interim Tier 4 |
Transmission Information of CaseIH, Steiger 400Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Full power shift |
|---|---|
| Gears | 16 forward and 2 reverse |
| Clutch | Electro-hydraulic wet discs |
Mechanical Specs of CaseIH, Steiger 400Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Surveyor cab standard. |
Power Information of CaseIH, Steiger 400Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 1000 (1-3/4) |
Hydraulics Specifications of CaseIH, Steiger 400
Hydraulic system type, pressure, pump flow and valves.
| Type | Pressure flow compensating (PFC) |
|---|---|
| 56 gpm (High Flow) [212.0 lpm] | |
| Total flow | 42 gpm [159.0 lpm] |
| Rear valves | 4 to 8 |
| 113 gpm (Twin Flow) [427.7 lpm] | |
| Pump flow | 35 gpm [132.5 lpm] |
Three-Point Hitch of CaseIH, Steiger 400
Hitch category and rear/front lift capacity.
| Rear Type | 4N |
|---|---|
| Rear lift | 20,000 lbs [9072 kg] |
Electrical System of CaseIH, Steiger 400
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery CCA | 1000 |
| Batteries | 2 |
| Charging system | Alternator |
| Battery volts | 12 |
| Charging amps | 200 |
Frequently asked questions
How much horsepower does the CaseIH Steiger 400 have?
The CaseIH Steiger 400 delivers 400 HP.
What years was the CaseIH Steiger 400 produced?
The CaseIH Steiger 400 was produced in 2011-2013.
What engine does the CaseIH Steiger 400 have?
The CaseIH Steiger 400 is powered by a Wastegate turbocharged aftercooled diesel, 6-cylinder 24-valve engine.
What transmission does the CaseIH Steiger 400 use?
The CaseIH Steiger 400 uses a Full power shift transmission.
How much does the CaseIH Steiger 400 weigh?
The CaseIH Steiger 400 weighs 36,048 lbs (dual 710/70R42) [16351 kg].
Is the CaseIH Steiger 400 4WD?
The CaseIH Steiger 400 is available in 4WD.