Introduction
Production Information of Chamberlain, Canelander
The production information of the tractor (Canelander) includes details about its manufacturing.
| High-Clearance tractor |
| Built in Welshpool, Australia |
| Manufacturer | Chamberlain |
|---|
Dimension and Tires Information of Chamberlain, Canelander
This section sums up the dimension and tires information of the tractor.
| Ground clearance | 26 inches [66 cm] |
|---|---|
| Wheelbase | 92 inches [233 cm] |
| Operating weight | 7350 lbs [3333 kg] |
| Height (steering wheel) | 75.5 inches [191 cm] |
| Length | 149 inches [378 cm] |
| Front tread | 56 to 80 inches [142 to 203 cm] |
| Ballasted weight | 9310 lbs [4223 kg] |
| Width | 79 inches [200 cm] |
| Rear tread | 54 to 78.5 inches [137 to 199 cm] |
| Ag front | 7.50x18 |
|---|---|
| Ag rear | 14.9x38 |
Engine Specifications of Chamberlain, Canelander
Get the specifications for the engine and if different options are available.
| Perkins 4-270D |
| Liquid-cooled |
| Diesel |
| 4-cylinder |
| Starter volts | 12 |
|---|---|
| Displacement | 270 ci [4.4 L] |
| Pre-heating | Thermostart |
| Bore/Stroke | 4.25x4.75 inches [108 x 121 mm] |
| Rated RPM | 2000 |
| Compression | 16:1 |
| Power | 62 hp [46.2 kW] |
Transmission Information of Chamberlain, CanelanderY
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Gear |
|---|---|
| Gears | 9 forward and 3 reverse |
| Clutch | 355.6mm dry disc |
Transmission variants 2
| Gears | 9 forward and 6 reverse |
|---|
| 9-speed gear |
| 9-speed |
Mechanical Specs of Chamberlain, CanelanderY
This section summarizes all mechanical information such as the brake system and other specifications.
| Two-wheel drive |
| Open operator station. |
| Manual steering |
| Mechanical expanding brakes |
Power Information of Chamberlain, CanelanderY
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 540 (1.375) |
| Engine RPM | 540@1600 |
Hydraulics Specifications of Chamberlain, Canelander
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Pump flow | 9.8 gpm [37.1 lpm] |
| Capacity | 2.4 gal [9.1 L] |
| Pressure | 1750 psi [120.7 bar] |
Three-Point Hitch of Chamberlain, Canelander
Hitch category and rear/front lift capacity.
| Rear Type | II |
|---|---|
| Rear lift (at ends) | 3500 lbs [1587 kg] |
Frequently asked questions
How much horsepower does the Chamberlain Canelander have?
The Chamberlain Canelander delivers 62 HP.
What years was the Chamberlain Canelander produced?
The Chamberlain Canelander was produced in 1959-1973.
What engine does the Chamberlain Canelander have?
The Chamberlain Canelander is powered by a Diesel, 4-cylinder engine.
What transmission does the Chamberlain Canelander use?
The Chamberlain Canelander uses a Gear transmission.
How much does the Chamberlain Canelander weigh?
The Chamberlain Canelander weighs 7350 lbs [3333 kg].
Is the Chamberlain Canelander 4WD?
The Chamberlain Canelander is available in 2WD.