Cub Cadet 7252 tractor

Cub Cadet 7252

Power

25 hp

Production

2003

Transmission

Hydrostatic

Weight

1597 lbs [724 kg]

Drive

2WD

From the same series:

7254

Introduction

Production Information of Cub Cadet, 7252

The production information of the tractor (7252) includes details about its manufacturing.

Compact Utility tractor
Original price was $10,000 in 2003
ManufacturerCub Cadet

Dimension and Tires Information of Cub Cadet, 7252

This section sums up the dimension and tires information of the tractor.

Weight1597 lbs [724 kg]
Wheelbase58 inches [147 cm]
Height53 inches [134 cm]
Width48 inches [121 cm]
Length91 inches [231 cm]
Ground clearance8 inches [20 cm]
Height (ROPS)79 inches [200 cm]
109 inches (with hitch) [276 cm]
Lawn/turf front20x9-8
Lawn/turf rear27x12-15

Engine Specifications of Cub Cadet, 7252

Get the specifications for the engine and if different options are available.

Liquid-cooled
Coolant change400 h
Coolant capacity3.5 qts [3.3 L]
Fuel systemDual carburetor
Sparkplug gap0.030 inches [0.762 mm]
Pre-heatingCoolant heater (optional)
Rated RPM3600
Air cleanerPaper element
Displacement45.6 ci [0.7 L]
Power25 hp [18.6 kW]
Oil capacity2.1 qts [2.0 L]
Oil change100 h
Bore/Stroke3.07x3.07 inches [78 x 78 mm]
Starter volts12
Intake valve clearance0.006 inches (cold) [0.152 mm]
Exhaust valve clearance0.006 inches (cold) [0.152 mm]
StarterElectric
Idle RPM1550-3600

Transmission Information of Cub Cadet, 7252Y

Discover all variants of transmission available for this tractor model.

Transmission variants 1

Hydrostatic transmission with forward-reverse tredle pedal and high-low range shift. Tractor must be stopped to shift range.
TypeHydrostatic
Cab Cadet Hy-Trans Fluid
Oil typeCab Cadet Hy-Trans Fluid
GearsInfinite forward and reverse (2-range)
Oil capacity24 qts [22.7 L]

Mechanical Specs of Cub Cadet, 7252Y

This section summarizes all mechanical information such as the brake system and other specifications.

Two-wheel drive
Two-post foldable ROPS.
Dry shoe brakes
Differential lockMechanical rear
SteeringHydrostatic power

Power Information of Cub Cadet, 7252Y

Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.

Mid PTO Type2000 (1.000)
Rear PTOIndependent
Mid PTOIndependent
Engine RPM540@3500
ClutchElectric
ClutchElectric
Rear PTO Type540 (1.375)

Hydraulics Specifications of Cub Cadet, 7252

Hydraulic system type, pressure, pump flow and valves.

TypeOpen center gear pump
Total flow8 gpm [30.3 lpm]
Pump flow5 gpm [18.9 lpm]
Capacity6 gal [22.7 L]
Steering flow3 gpm [11.4 lpm]
Pressure1500 psi [103.4 bar]

Three-Point Hitch of Cub Cadet, 7252

Hitch category and rear/front lift capacity.

Rear TypeI
Rear lift (at 24"/610mm)950 lbs [430 kg]
ControlPosition control
Rear lift (at ends)1150 lbs [521 kg]

Electrical System of Cub Cadet, 7252

Battery voltage, charging system and ground.

GroundNegative
Battery volts12
Battery CCA500
Charging systemFlywheel alternator
Charging amps30

Frequently asked questions

How much horsepower does the Cub Cadet 7252 have?

The Cub Cadet 7252 delivers 25 HP.

What years was the Cub Cadet 7252 produced?

The Cub Cadet 7252 was produced in 2003.

What transmission does the Cub Cadet 7252 use?

The Cub Cadet 7252 uses a Hydrostatic transmission.

How much does the Cub Cadet 7252 weigh?

The Cub Cadet 7252 weighs 1597 lbs [724 kg].

Is the Cub Cadet 7252 4WD?

The Cub Cadet 7252 is available in 2WD.

Compare the Cub Cadet 7252 with another model