Introduction
Production Information of Deutz-Fahr, 4075E
The production information of the tractor (4075E) includes details about its manufacturing.
| Utility tractor |
| Manufacturer | Deutz-Fahr |
|---|
Dimension and Tires Information of Deutz-Fahr, 4075E
This section sums up the dimension and tires information of the tractor.
| 2WD Wheelbase | 80.4 inches [204 cm] |
|---|---|
| 4WD Wheelbase | 77.8 inches [197 cm] |
| Width | 69.8 inches [177 cm] |
No data available
Engine Specifications of Deutz-Fahr, 4075E
Get the specifications for the engine and if different options are available.
| SDF 1000.3 WTI |
| Liquid-cooled |
| Turbocharged intercooled diesel |
| 3-cylinder |
| Starter volts | 12 |
|---|---|
| Displacement | 183.1 ci [3.0 L] |
| Power | 71.1 hp [53.0 kW] |
| Bore/Stroke | 4.13x4.56 inches [105 x 116 mm] |
| Starter | Electric |
| Torque | 195.5 lb-ft [265.1 Nm] |
| Emissions | Stage IIIA |
Transmission Information of Deutz-Fahr, 4075EY
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Five synchronized gears in three ranges with shuttle and underdrive. |
| Type | Partially synchronized |
|---|---|
| Gears | 30 forward and 15 reverse |
Mechanical Specs of Deutz-Fahr, 4075EY
This section summarizes all mechanical information such as the brake system and other specifications.
| Two- or four-wheel drive |
| Open operator station. Cab optional with air-conditioning. |
| Wet disc brakes |
| Power steering |
| Differential lock | Mechanical |
|---|
Power Information of Deutz-Fahr, 4075EY
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 540/540E |
Hydraulics Specifications of Deutz-Fahr, 4075E
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Valves | 2 |
| Pump flow | 11.1 gpm [42.0 lpm] |
Three-Point Hitch of Deutz-Fahr, 4075E
Hitch category and rear/front lift capacity.
| Rear Type | II |
|---|---|
| Rear lift | 7717 lbs [3500 kg] |
Electrical System of Deutz-Fahr, 4075E
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
Frequently asked questions
How much horsepower does the Deutz-Fahr 4075E have?
The Deutz-Fahr 4075E delivers 71 HP.
What years was the Deutz-Fahr 4075E produced?
The Deutz-Fahr 4075E was produced in 2018+.
What engine does the Deutz-Fahr 4075E have?
The Deutz-Fahr 4075E is powered by a Turbocharged intercooled diesel, 3-cylinder engine.
What transmission does the Deutz-Fahr 4075E use?
The Deutz-Fahr 4075E uses a Partially synchronized transmission.
Is the Deutz-Fahr 4075E 4WD?
The Deutz-Fahr 4075E is available in 2WD/4WD.