Deutz-Fahr X710
Power
215 hp
Production
2006-2012
Engine
Turbocharged intercooled diesel, 6-cylinder
Weight
23005 lbs [10435 kg]
Drive
4WD
From the same series:
Introduction
Production Information of Deutz-Fahr, X710
The production information of the tractor (X710) includes details about its manufacturing.
| Row-Crop tractor |
| Manufacturer | Deutz-Fahr |
|---|
Dimension and Tires Information of Deutz-Fahr, X710
This section sums up the dimension and tires information of the tractor.
| Wheelbase | 121.9 inches [309 cm] |
|---|---|
| Weight | 23005 lbs [10435 kg] |
| Height (cab) | 128.7 inches [326 cm] |
| Length | 212.6 inches [540 cm] |
| Max weight | 30865 lbs [14000 kg] |
| Width | 108.3 inches [275 cm] |
| Standard tires (ag) | Front: 520/70R34. Rear: 710/70R42 |
|---|---|
| Front: 520/70R30. Rear: 580/70R42 | |
| Front: 480/70R34. Rear: 650/85R38 | |
| Optional tires (ag) | Front: 18.4R30. Rear: 20.8R42 |
| Front: 520/70R30. Rear: 650/65R42 | |
| Front: 18.4R34. Rear: 20.8R42 |
Engine Specifications of Deutz-Fahr, X710
Get the specifications for the engine and if different options are available.
| Deutz TCD2013 L06 4V |
| Liquid-cooled |
| 6-cylinder |
| Turbocharged intercooled diesel |
| Oil capacity | 29.6 qts [28.0 L] |
|---|---|
| Starter power | 5.4 hp [4.0 kW] |
| Maximum Power (gross) | 246.7 hp [184.0 kW] |
| Torque | 708.8 lb-ft [961.1 Nm] |
| Rated RPM | 2300 |
| Displacement | 436.1 ci [7.1 L] |
| Rated Power (gross) | 215.9 hp [161.0 kW] |
| Fuel system | Common rail |
| Bore/Stroke | 4.25x5.12 inches [108 x 130 mm] |
| Starter volts | 12 |
| Starter | Electric |
| Torque RPM | 1600 |
Transmission Information of Deutz-Fahr, X710Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Six synchronized gears (1-6) in four power shift ranges (L/M/H/S) with power shuttle. Additional creeper range with four gears (1-4) in four ranges (L/M/H/S). |
| Gears | 40 forward and reverse |
|---|
Mechanical Specs of Deutz-Fahr, X710Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Cab standard with air-conditioning. |
| Power steering |
| Wet disc brakes |
Power Information of Deutz-Fahr, X710Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Clutch | Electro-hydraulic |
| Front PTO | Independent |
| Clutch | Electro-hydraulic |
| Front PTO Type | 1000 |
| Rear PTO Type | 540E/1000 |
Hydraulics Specifications of Deutz-Fahr, X710
Hydraulic system type, pressure, pump flow and valves.
| Type | Load sensing |
|---|---|
| Steering press. | 2683 psi [185.0 bar] |
| Steering flow | 15.1 gpm [57.2 lpm] |
| Pressure | 2901 psi [200.0 bar] |
| Pump flow | 31.7 gpm [120.0 lpm] |
Three-Point Hitch of Deutz-Fahr, X710
Hitch category and rear/front lift capacity.
| Rear Type | III |
|---|---|
| Front lift | 11020 lbs [4998 kg] |
| Rear lift | 23150 lbs [10500 kg] |
| Front Hitch | II |
Electrical System of Deutz-Fahr, X710
Battery voltage, charging system and ground.
| Charging system | Alternator |
|---|---|
| Battery AH | 180 |
| Charging amps | 200 |
| Battery volts | 12 |
Frequently asked questions
How much horsepower does the Deutz-Fahr X710 have?
The Deutz-Fahr X710 delivers 215 HP.
What years was the Deutz-Fahr X710 produced?
The Deutz-Fahr X710 was produced in 2006-2012.
What engine does the Deutz-Fahr X710 have?
The Deutz-Fahr X710 is powered by a Turbocharged intercooled diesel, 6-cylinder engine.
How much does the Deutz-Fahr X710 weigh?
The Deutz-Fahr X710 weighs 23005 lbs [10435 kg].
Is the Deutz-Fahr X710 4WD?
The Deutz-Fahr X710 is available in 4WD.