Introduction
Eagle E 20-35 Standard-Tread Tractor
The Eagle E 20-35 is a standard-tread tractor manufactured by Eagle Manufacturing in Appleton, Wisconsin, between 1920 and 1930. This machine represents the heavy-duty agricultural equipment era of the early 20th century.
Engine and Fuel System
The tractor is powered by a 2-cylinder, 4-valve liquid-cooled engine with a displacement of 908 cubic inches (14.9 L). It utilizes a Schebler carburetor and is designed to operate on kerosene. The engine reaches its rated performance at 450 RPM and is started via a hand-crank mechanism.
Transmission and Drivetrain
The drivetrain features a manual gear-type transmission providing two forward speeds and one reverse speed. Power is delivered to the rear wheels via spur gear final drives, supporting the tractor's two-wheel drive configuration.
Operational Capacity
The E 20-35 delivers a claimed drawbar power of 20 hp (14.9 kW) and a belt power of 35 hp (26.1 kW). This power output allows the tractor to effectively pull a 3 to 4-bottom plow setup, with each plow measuring 14 inches.
Dimensions and Construction
Built with an open operator station and manual steering, the tractor weighs approximately 7500 lbs (3402 kg). It measures 139 inches (353 cm) in length, 73 inches (185 cm) in width, and 72 inches (182 cm) in height. The machine is equipped with 48x14 steel agricultural rear wheels.
Conclusion
The Eagle E 20-35 was designed as a robust, standard-tread utility tractor suitable for primary tillage and heavy belt-driven farm tasks during the 1920s.
Production Information of Eagle Manufacturing, E 20-35
- Standard-tread tractor
- Built in Appleton, Wisconsin, USA
| Manufacturer | Eagle Manufacturing |
|---|
Dimension and Tires Information of Eagle Manufacturing, E 20-35
| Length | 139 inches [353 cm] |
|---|---|
| Weight | 7500 lbs [3402 kg] |
| Width | 73 inches [185 cm] |
| Height | 72 inches [182 cm] |
| Ag rear | 48x14 (steel) |
|---|
Engine Specifications of Eagle Manufacturing, E 20-35
- Eagle Manufacturing
- Liquid-cooled
- Kerosene
- 2-cylinder 4-valve
| Fuel system | Schebler carburetor |
|---|---|
| Displacement | 908 ci [14.9 L] |
| Rated RPM | 450 |
| Bore/Stroke | 8.00x9.00 inches [203 x 229 mm] |
| Starter type | Hand-crank |
Transmission Information of Eagle Manufacturing, E 20-35
Transmission variants 1
| Type | Gear |
|---|---|
| Gears | 2 forward and 1 reverse |
Mechanical Specs of Eagle Manufacturing, E 20-35
- Two-wheel drive
- Open operator station.
| Final drives | Spur gear |
|---|---|
| Steering | Manual |
Power Information of Eagle Manufacturing, E 20-35
| Drawbar (claimed) | 20 hp [14.9 kW] |
|---|---|
| Belt (claimed) | 35 hp [26.1 kW] |
| Plows | 3-4 (14-inch) |
Where it sits
With 38 hp[B] HP, the Eagle Manufacturing E 20-35 sits between H 16-30 (33 HP) and 6A (41 HP) in Eagle Manufacturing's range. Its power puts it in the 68th percentile of 1920s models in our database (181 machines).
Frequently asked questions
How much horsepower does the Eagle Manufacturing E 20-35 have?
The Eagle Manufacturing E 20-35 delivers 38 hp[B] HP.
What years was the Eagle Manufacturing E 20-35 produced?
The Eagle Manufacturing E 20-35 was produced in 1920-1930.
What engine does the Eagle Manufacturing E 20-35 have?
The Eagle Manufacturing E 20-35 is powered by a 2-cylinder 4-valve engine.
What transmission does the Eagle Manufacturing E 20-35 use?
The Eagle Manufacturing E 20-35 uses a Gear transmission.
How much does the Eagle Manufacturing E 20-35 weigh?
The Eagle Manufacturing E 20-35 weighs 7500 lbs [3402 kg].
Is the Eagle Manufacturing E 20-35 4WD?
The Eagle Manufacturing E 20-35 is available in 2WD.