Fendt 828 Vario
Power
276 hp
Production
2010-2020
Engine
Turbocharged intercooled diesel, 6-cylinder 24-valve
Transmission
Fendt Vario
Drive
4WD
From the same series:
Introduction
Production Information of Fendt, 828 Vario
The production information of the tractor (828 Vario) includes details about its manufacturing.
| Built in Marktoberdoft, Germany |
| Manufacturer | Fendt |
|---|
Dimension and Tires Information of Fendt, 828 Vario
This section sums up the dimension and tires information of the tractor.
| Rear tread | 77.6 inches [197 cm] |
|---|---|
| Wheelbase | 114.2 inches [290 cm] |
| Ground clearance | 22.3 inches [56 cm] |
| Height | 128.7 inches [326 cm] |
| Length | 207.6 inches [527 cm] |
| Front tread | 78.7 inches [199 cm] |
| Width | 100.4 inches [255 cm] |
| Standard tires (ag) | Front: 540/65R34. Rear: 650/85R38 |
|---|---|
| Front: 600/70R30. Rear: 800/70R38 | |
| Front: 600/70R30. Rear: 710/70R42 | |
| Optional tires (ag) | Front: 540/65R30. Rear: 650/65R42 |
| Front: 540/65R34. Rear: 900/60R38 | |
| Front: 540/65R34. Rear: 650/75R42 |
Engine Specifications of Fendt, 828 Vario
Get the specifications for the engine and if different options are available.
| Deutz |
| Liquid-cooled |
| Turbocharged intercooled diesel |
| 6-cylinder 24-valve |
| Torque RPM | 1450 |
|---|---|
| Torque | 892.5 lb-ft [1210.2 Nm] |
| Tier IV interim | |
| Starter power | 5.4 hp [4.0 kW] |
| Rated Power (net) | 260 hp [193.9 kW] |
| Rated Power (gross) | 276 hp [205.8 kW] |
| Emission control | Def |
| Displacement | 369.6 ci [6.1 L] |
| Emissions | Stage 3b |
| Bore/Stroke | 3.976x4.961 inches [101 x 126 mm] |
| Rated RPM | 2100 |
| Oil change | 500 h |
| Maximum Power (gross) | 287 hp [214.0 kW] |
| Maximum Power (net) | 280 hp [208.8 kW] |
Transmission Information of Fendt, 828 VarioY
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Transmission | Fendt Vario |
|---|---|
| Type | Continuously variable transmission (IVT) |
| Gears | Infinite forward and reverse (2-range) |
Mechanical Specs of Fendt, 828 VarioY
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| X5 Cab standard with air-conditioning. Optional CD/MP3 player. |
Power Information of Fendt, 828 VarioY
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO Type | 540E/1000 |
|---|---|
| 1000/1000E (optional) | |
| Front PTO Type | 1000 (optional) |
Hydraulics Specifications of Fendt, 828 Vario
Hydraulic system type, pressure, pump flow and valves.
| Total flow | 28.8 gpm [109.0 lpm] |
|---|---|
| 40.2 gpm (optional) [152.2 lpm] | |
| 51 gpm (optional) [193.0 lpm] |
Three-Point Hitch of Fendt, 828 Vario
Hitch category and rear/front lift capacity.
| Rear lift | 24,980 lbs [11330 kg] |
|---|---|
| Front lift | 10,000 lbs [4536 kg] |
Electrical System of Fendt, 828 Vario
Battery voltage, charging system and ground.
| Charging system | Alternator |
|---|---|
| Battery AH | 170 |
| Charging amps | 300 |
| Battery volts | 12 |
Frequently asked questions
How much horsepower does the Fendt 828 Vario have?
The Fendt 828 Vario delivers 276 HP.
What years was the Fendt 828 Vario produced?
The Fendt 828 Vario was produced in 2010-2020.
What engine does the Fendt 828 Vario have?
The Fendt 828 Vario is powered by a Turbocharged intercooled diesel, 6-cylinder 24-valve engine.
What transmission does the Fendt 828 Vario use?
The Fendt 828 Vario uses a Fendt Vario transmission.
Is the Fendt 828 Vario 4WD?
The Fendt 828 Vario is available in 4WD.