Fendt 938 Vario MT
Power
374 hp
Production
2020+
Engine
Turbocharged diesel, 7-cylinder
Transmission
Vario ML400T
From the same series:
Introduction
Production Information of Fendt, 938 Vario MT
The production information of the tractor (938 Vario MT) includes details about its manufacturing.
| Agricultural Crawler tractor |
| Built in Jackson, Minnesota, USA |
| Manufacturer | Fendt (a part of AGCO) |
|---|
Dimension and Tires Information of Fendt, 938 Vario MT
This section sums up the dimension and tires information of the tractor.
No data available
No data available
Engine Specifications of Fendt, 938 Vario MT
Get the specifications for the engine and if different options are available.
| Liquid-cooled |
| Turbocharged diesel |
| 7-cylinder |
| Torque RPM | 1450 |
|---|---|
| Displacement | 598 ci [9.8 L] |
| Rated Power (gross) | 374 hp [278.9 kW] |
| Bore/Stroke | 4.37x5.71 inches [111 x 145 mm] |
| Starter volts | 12 |
| Starter | Electric |
| Torque | 1252 lb-ft [1697.7 Nm] |
| Rated RPM | 1450 |
| Emissions | Tier IV |
Transmission Information of Fendt, 938 Vario MTY
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Transmission | Vario ML400T |
|---|---|
| Type | Continuously-variable transmission |
| Gears | Infinite forward and reverse |
Mechanical Specs of Fendt, 938 Vario MTY
This section summarizes all mechanical information such as the brake system and other specifications.
| Cab standard with air-conditioning. |
| Drive | Crawler |
|---|
Power Information of Fendt, 938 Vario MTY
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| 1000E@1225 | |
| Rear PTO Type | 1000/1000E (1.75) |
| Engine RPM | 1000@1650 |
Hydraulics Specifications of Fendt, 938 Vario MT
Hydraulic system type, pressure, pump flow and valves.
| SCV flow | 37 gpm [140.0 lpm] |
|---|---|
| Type | Closed center |
| Pump flow | 58 gpm [219.5 lpm] |
| Valves | 4 to 6 |
| Capacity | 33 gal [124.9 L] |
| 45 gpm*Optional, with 0.625 or 0.75 inch couplers. [170.3 lpm] | |
| 116 gpm*Optional combined flow of dual pumps. [439.1 lpm] | |
| Pressure | 2900 psi [200.0 bar] |
Three-Point Hitch of Fendt, 938 Vario MT
Hitch category and rear/front lift capacity.
| Rear Type | IVN/III |
|---|---|
| Drawbar | Cat. 4 |
| Rear lift (at 24"/610mm) | 16500 lbs [7484 kg] |
| Control | Position and draft control |
| Rear lift (at ends) | 19000 lbs [8618 kg] |
Electrical System of Fendt, 938 Vario MT
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Batteries | 2 |
| Charging system | Alternator |
| Battery AH | 185 |
| Charging amps | 300 *Dual 150A alternators. |
Frequently asked questions
How much horsepower does the Fendt 938 Vario MT have?
The Fendt 938 Vario MT delivers 374 HP.
What years was the Fendt 938 Vario MT produced?
The Fendt 938 Vario MT was produced in 2020+.
What engine does the Fendt 938 Vario MT have?
The Fendt 938 Vario MT is powered by a Turbocharged diesel, 7-cylinder engine.
What transmission does the Fendt 938 Vario MT use?
The Fendt 938 Vario MT uses a Vario ML400T transmission.