Introduction
Production Information of Fiat-Hesston, 80-66
The production information of the tractor (80-66) includes details about its manufacturing.
| Original price was $26,500 in 1990 |
| Utility tractor |
| Distributor | Hesston |
|---|---|
| Manufacturer | Fiat |
Dimension and Tires Information of Fiat-Hesston, 80-66
This section sums up the dimension and tires information of the tractor.
| 2WD Front tread | 55.1 to 74.75 inches [139 to 189 cm] |
|---|---|
| 2WD Wheelbase | 90.7 inches [230 cm] |
| 2WD Clearance (front axle) | 21.5 inches [54 cm] |
| 4WD Length | 143 inches [363 cm] |
| 4WD Wheelbase | 88.5 inches [224 cm] |
| 4WD Front tread | 60.25 to 77 inches [153 to 195 cm] |
| 4WD Clearance (front axle) | 16 inches [40 cm] |
| 2WD Length | 139 inches [353 cm] |
| Rear tread | 55.1 to 78.75 inches [139 to 200 cm] |
| 2WD Standard tires (ag) | Front: 7.50-16. Rear: 18.4-30 |
|---|---|
| 4WD Standard tires (ag) | Front: 12.4-24. Rear: 18.4-30 |
Engine Specifications of Fiat-Hesston, 80-66
Get the specifications for the engine and if different options are available.
| Liquid-cooled |
| Diesel |
| 4-cylinder |
| Starter | Electric |
|---|---|
| Displacement | 238.5 ci [3.9 L] |
| Pre-heating | Ether |
| Bore/Stroke | 4.094x4.527 inches [104 x 115 mm] |
| Starter volts | 12 |
| Rated RPM | 2500 |
| Compression | 17:1 |
| Power | 80 hp [59.7 kW] |
Transmission Information of Fiat-Hesston, 80-66Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Four gears (1-4) in three ranges (I-III). Shifts between gears are synchronized. |
| Type | Partially synchronized |
|---|---|
| Gears | 12 forward and 4 reverse |
Transmission variants 2
| Four gears (1-4) in three ranges (I-III) with shuttle. |
| Type | Mechanical shuttle |
|---|---|
| Gears | 12 forward and reverse |
Transmission variants 3
| Four gears (1-4) in three ranges (I-III) with normal and creeper ranges. |
| Type | Creeper |
|---|---|
| Gears | 20 forward and 8 reverse |
| 12-speed partially synchronized |
| 12-speed mechanical shuttle |
| 20-speed creeper |
Mechanical Specs of Fiat-Hesston, 80-66Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two- or four-wheel drive |
| Four-post ROPS. Canopy optional. |
| Power steering |
| Differential mechanical wet disc brakes |
Power Information of Fiat-Hesston, 80-66Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 540/ground |
| 540/1000 OptOptional |
Hydraulics Specifications of Fiat-Hesston, 80-66
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Total flow | 11 gpm [41.6 lpm] |
| Pressure | 2700 psi [186.2 bar] |
| Valves | 1 to 3 |
Three-Point Hitch of Fiat-Hesston, 80-66
Hitch category and rear/front lift capacity.
| Rear Type | II |
|---|---|
| Control | Position and lower-link draft control |
| Rear lift | 5194 lbs [2355 kg] |
Electrical System of Fiat-Hesston, 80-66
Battery voltage, charging system and ground.
| Charging system | Alternator |
|---|---|
| Charging amps | 33 |
| Battery volts | 12 |
Frequently asked questions
How much horsepower does the Fiat-Hesston 80-66 have?
The Fiat-Hesston 80-66 delivers 80 HP.
What years was the Fiat-Hesston 80-66 produced?
The Fiat-Hesston 80-66 was produced in 1985-1991.
What engine does the Fiat-Hesston 80-66 have?
The Fiat-Hesston 80-66 is powered by a Diesel, 4-cylinder engine.
What transmission does the Fiat-Hesston 80-66 use?
The Fiat-Hesston 80-66 uses a Partially synchronized transmission.
Is the Fiat-Hesston 80-66 4WD?
The Fiat-Hesston 80-66 is available in 2WD/4WD.