Introduction
Production Information of Fiat, 300
The production information of the tractor (300) includes details about its manufacturing.
| Utility tractor |
| Manufacturer | Fiat |
|---|
Dimension and Tires Information of Fiat, 300
This section sums up the dimension and tires information of the tractor.
| 4WD Front tread | 51 inches [129 cm] |
|---|---|
| 2WD Wheelbase | 66.9 inches [169 cm] |
| 4WD Length | 106.8 inches [271 cm] |
| 2WD Length | 108 inches [274 cm] |
| 4WD Wheelbase | 68.1 inches [172 cm] |
| 2WD Clearance (front axle) | 20.5 inches [52 cm] |
| 300F Length | 103.8 inches [263 cm] |
| 300F Wheelbase | 60 inches [152 cm] |
| Rear tread | 39.3 to 66.8 inches [99 to 169 cm] |
| 2WD Front tread | 41.2 to 64.6 inches [104 to 164 cm] |
| 4WD Clearance (front axle) | 13 inches [33 cm] |
| Width | 51.2 inches [130 cm] |
| 2WD Standard tires (ag) | Front: 5.00-15. Rear: 11.2/10-24 |
|---|---|
| 4WD Standard tires (ag) | Front: 9.5/9-24. Rear: 8.00-20 |
| 300F Standard tires (ag) | Front: 5.00-15. Rear: 9.5/9-24 |
Engine Specifications of Fiat, 300
Get the specifications for the engine and if different options are available.
| Fiat 8025.02 |
| Liquid-cooled |
| Diesel |
| 2-cylinder |
| Starter volts | 12 |
|---|---|
| Displacement | 95.2 ci [1.6 L] |
| Fuel system | Direct injection |
| Bore/Stroke | 3.74x4.33 inches [95 x 110 mm] |
| Rated RPM | 2400 |
| Compression | 17:1 |
| Power | 28 hp [20.9 kW] |
Transmission Information of Fiat, 300Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Gear |
|---|---|
| Gears | 6 forward and 2 reverse |
| Clutch | 215.9mm dry disc |
Mechanical Specs of Fiat, 300Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two- or four-wheel drive |
| Open operator station. |
| Mechanical band brakes |
| Manual steering |
| Final drives | Spur gear |
|---|
Power Information of Fiat, 300Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Transmission |
|---|---|
| Engine RPM | 994@2250 |
| Rear PTO Type | 540 (1.375) |
| Engine RPM | 540@2120 |
Hydraulics Specifications of Fiat, 300
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Pressure | 2132 psi [147.0 bar] |
| Pump flow | 2.6 gpm [9.8 lpm] |
Three-Point Hitch of Fiat, 300
Hitch category and rear/front lift capacity.
| Rear Type | I |
|---|---|
| Control | Position and draft control |
| Rear lift (at ends) | 1653 lbs [749 kg] |
Electrical System of Fiat, 300
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Battery AH | 88 |
Frequently asked questions
How much horsepower does the Fiat 300 have?
The Fiat 300 delivers 28 HP.
What years was the Fiat 300 produced?
The Fiat 300 was produced in 1971-1978.
What engine does the Fiat 300 have?
The Fiat 300 is powered by a Diesel, 2-cylinder engine.
What transmission does the Fiat 300 use?
The Fiat 300 uses a Gear transmission.
Is the Fiat 300 4WD?
The Fiat 300 is available in 2WD/4WD.
