Introduction
Production Information of Fiat, 640
The production information of the tractor (640) includes details about its manufacturing.
| Utility tractor |
| Built in Moderna, Italy |
| Manufacturer | Fiat |
|---|
Dimension and Tires Information of Fiat, 640
This section sums up the dimension and tires information of the tractor.
| Front tread | 52 to 79.3 inches [132 to 201 cm] |
|---|---|
| 2WD Wheelbase | 81.5 inches [207 cm] |
| 2WD Weight | 4961 lbs [2250 kg] |
| 4WD Length | 132.3 inches [336 cm] |
| 4WD Wheelbase | 83.9 inches [213 cm] |
| Rear tread | 51.2 to 78.7 inches [130 to 199 cm] |
| 4WD Weight | 6174 lbs [2800 kg] |
| 2WD Length | 125 inches [317 cm] |
| 2WD Standard tires (ag) | Front: 7.50-16. Rear: 14-30 |
|---|---|
| 4WD Standard tires (ag) | Front: 9.5x24. Rear: 16.9-30 |
Engine Specifications of Fiat, 640
Get the specifications for the engine and if different options are available.
| Fiat 8045-02 |
| Liquid-cooled |
| 4-cylinder |
| Diesel |
| Fuel system | Direct injection |
|---|---|
| Torque | 156.4 lb-ft [212.1 Nm] |
| Displacement | 210.89 ci [3.5 L] |
| Bore/Stroke | 3.94x4.33 inches [100 x 110 mm] |
| Power | 64 hp [47.7 kW] |
| Rated RPM | 2400 |
| Compression | 17:1 |
| Starter volts | 12 |
| Starter | Electric |
| Torque RPM | 1600 |
Transmission Information of Fiat, 640Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Four gears, plus reverse, in two ranges. Optional additional creeper range. |
| Type | Gear |
|---|---|
| Gears | 8 forward and 2 reverse |
Mechanical Specs of Fiat, 640Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two- or four-wheel drive |
| Manual steering |
| Four-post ROPS. |
Power Information of Fiat, 640Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO Type | 540 |
|---|---|
| Engine RPM | 540@1970 |
Hydraulics Specifications of Fiat, 640
Hydraulic system type, pressure, pump flow and valves.
| Pump flow | 5.8 gpm [22.0 lpm] |
|---|
Three-Point Hitch of Fiat, 640
Hitch category and rear/front lift capacity.
| Rear Type | II/I |
|---|---|
| Rear lift (at ends) | 4079 lbs [1850 kg] |
Frequently asked questions
How much horsepower does the Fiat 640 have?
The Fiat 640 delivers 64 HP.
What years was the Fiat 640 produced?
The Fiat 640 was produced in 1973-1978.
What engine does the Fiat 640 have?
The Fiat 640 is powered by a Diesel, 4-cylinder engine.
What transmission does the Fiat 640 use?
The Fiat 640 uses a Gear transmission.
How much does the Fiat 640 weigh?
The Fiat 640 weighs 4961 lbs [2250 kg].
Is the Fiat 640 4WD?
The Fiat 640 is available in 2WD/4WD.