Ford-New Holland 8630 tractor

Ford-New Holland 8630

Power

134 hp[P] hp

Production

1990-1993

Engine

6-cylinder

Transmission

Funk Ultra Command

Drive

2WD/4WD

Introduction

Ford-New Holland 8630 Row-Crop Tractor

The Ford-New Holland 8630 is a row-crop tractor produced between 1990 and 1993 in Antwerp, Belgium. Positioned as a versatile machine for diverse agricultural operations, it delivers 134 horsepower through a liquid-cooled six-cylinder engine.

Engine and Performance

The tractor is powered by a 6-cylinder liquid-cooled engine with a displacement of 401 cubic inches (6.6 liters). It operates at a rated speed of 2200 RPM and features a 15.6:1 compression ratio. The engine cooling system has a capacity of 22 quarts, while the oil capacity is 19.6 quarts.

Transmission Systems

The 8630 offers three transmission configurations: the Funk Ultra Command Powershift (18 forward and 9 reverse gears), the Dual Power constant mesh (16 forward and 4 reverse), and a standard constant mesh transmission (8 forward and 2 reverse). The Ultra Command system enables on-the-move gear changes and shuttle shifting without the use of a clutch.

Hydraulics and PTO

The hydraulic system utilizes an open-center design with a pump flow of 20 gpm and a system pressure of 2500 psi. An auxiliary SCV flow of 16.9 gpm is available for implements. The independent rear PTO provides dual-speed operation at 540 and 1000 RPM, controlled by a 3/2 rear hitch system with position and draft control.

Mechanical and Dimensions

The tractor is built on a 105-inch wheelbase with an overall length of 172 inches and a width of 82 inches. It features power steering and power-assisted disc brakes. The machine is available in two-wheel or four-wheel drive configurations, with an optional climate-controlled cab including heat and air conditioning.

Conclusion

With its robust engine and flexible transmission options, the Ford-New Holland 8630 serves as a reliable platform for heavy-duty row-crop field work, offering the necessary hydraulic capacity and operator comfort features for extended daily operation.

Production Information of Ford-New Holland, 8630

  • Original price was $52,500 in 1993
  • Row-Crop tractor
  • Built in Antwerp, Belgium
ManufacturerFord-New Holland

Dimension and Tires Information of Ford-New Holland, 8630

Wheelbase105 inches [266 cm]
Ground clearance16.4 inches [41 cm]
Length172 inches [436 cm]
Width82 inches [208 cm]
Ag front11.00-16 (2WD)
Ag front(optional)14.9/13-28 (4WD)
Ag rear18.4/15-38

Engine Specifications of Ford-New Holland, 8630

  • Liquid-cooled
  • 6-cylinder
Displacement401 ci [6.6 L]
Oil capacity19.6 qts [18.5 L]
Rated RPM2200
Bore/Stroke4.40x4.40 inches [112 x 112 mm]
Exhaust valve clearance0.017-0.019 inches (cold) [0.432 mm]
Intake valve clearance0.014-0.016 inches (cold) [0.356 mm]
Coolant capacity22 qts [20.8 L]
Firing order1-5-3-6-2-4
Compression15.6:1

Transmission Information of Ford-New Holland, 8630

Transmission variants 1

  • The Ford Ultra Command Powershift allows on-the-move shifting between gears, and shuttle shifting, without a clutch. A single lever controls the transmission; moving it to the left shifts down, to the right shifts up. Pushing forward increases forward throttle while pulling it back moves the tractor in reverse. An inching pedal is used for precise movements.
TransmissionFunk Ultra Command
Gears18 forward and 9 reverse
Oil capacity100.4 qts [95.0 L]

Transmission variants 2

  • The Dual Power transmission provides a 'Powerdrive' low range to the basic constant mesh transmission. A foot switch next to the clutch is used to engage and disengage the mode, and may be switched while the tractor is in motion. A "rabbit" or "turtle" display light on the instrument panel indicates which mode the transmission is selected.
TransmissionDual Power - constant mesh
Transmission(optional)85.5 qts (4WD) [80.9 L]
Gears16 forward and 4 reverse
Oil capacity80 qts (2WD) [75.7 L]

Transmission variants 3

  • Tranmission is operated with two levers and the clutch pedal. Left lever selects high, low, or the optional creeper range. Right lever selects one of four forward gears, or reverse. Tractor must be stopped to make gear or range changes.
TransmissionConstant mesh
Transmission(optional)87.3 qts (4WD) [82.6 L]
Gears8 forward and 2 reverse
Oil capacity72.8 qts (2WD) [68.9 L]
  • 18-speed
  • 16-speed
  • 8-speed

Mechanical Specs of Ford-New Holland, 8630

  • Two- or four-wheel drive
  • Optional cab with heat and A/C
  • Power steering
  • Power disc brakes

Power Information of Ford-New Holland, 8630

Rear PTOIndependent
Rear PTO Type540/1000

Hydraulics Specifications of Ford-New Holland, 8630

Steering cap.2 qts [1.9 L]
TypeOpen center
SCV flow16.9 gpm [64.0 lpm]
SCV flow(optional)28.6 gpm (dual pumps) [108.3 lpm]
Pressure2500 psi [172.4 bar]
Steering press.2025 psi [139.6 bar]
Steering press.(optional)19 gpm (dual pumps) [71.9 lpm]
Pump flow20 gpm [75.7 lpm]

Three-Point Hitch of Ford-New Holland, 8630

Rear Type3/2
ControlPosition and draft control

Electrical System of Ford-New Holland, 8630

Charging systemAlternator
Charging amps90
Battery volts12

Where it sits

With 134 hp[P] HP, the Ford-New Holland 8630 sits between 8530 (116 HP) and 8730 (155 HP) in Ford-New Holland's range. Its power puts it in the 81th percentile of 1990s models in our database (2097 machines).

Frequently asked questions

How much horsepower does the Ford-New Holland 8630 have?

The Ford-New Holland 8630 delivers 134 hp[P] HP.

What years was the Ford-New Holland 8630 produced?

The Ford-New Holland 8630 was produced in 1990-1993.

What engine does the Ford-New Holland 8630 have?

The Ford-New Holland 8630 is powered by a 6-cylinder engine.

What transmission does the Ford-New Holland 8630 use?

The Ford-New Holland 8630 uses a Funk Ultra Command transmission.

Is the Ford-New Holland 8630 4WD?

The Ford-New Holland 8630 is available in 2WD/4WD.

Compare the Ford-New Holland 8630 with another model