Introduction
Production Information of Ford, 2810
The production information of the tractor (2810) includes details about its manufacturing.
| Utility tractor |
| Original price was $16,000 in 1990 |
| Manufacturer | Ford |
|---|
Dimension and Tires Information of Ford, 2810
This section sums up the dimension and tires information of the tractor.
| 4WD Front tread | 56 to 72 inches [142 to 182 cm] |
|---|---|
| 2WD Wheelbase | 77.5 inches [196 cm] |
| 2WD Operating weight | 4420 lbs [2004 kg] |
| Width | 68.4 inches [173 cm] |
| 4WD Wheelbase | 84.1 inches [213 cm] |
| 4WD Clearance (front axle) | 13.1 inches [33 cm] |
| 4WD Operating weight | 4995 lbs [2265 kg] |
| Length | 127.2 inches [323 cm] |
| Rear tread | 56 to 80 inches [142 to 203 cm] |
| 2WD Front tread | 52 to 80 inches [132 to 203 cm] |
| Clearance (rear axle) | 20.5 inches [52 cm] |
| 2WD Clearance (front axle) | 21.5 inches [54 cm] |
| 2WD Standard tires (ag) | Front: 6.00-16. Rear: 13.6-28 |
|---|---|
| 4WD Standard tires (ag) | Front: 8.3-24. Rear: 13.6-28 |
Engine Specifications of Ford, 2810
Get the specifications for the engine and if different options are available.
| Ford |
| Liquid-cooled |
| 3-cylinder |
| Diesel |
| Coolant capacity | 11 qts [10.4 L] |
|---|---|
| Oil capacity | 7 qts [6.6 L] |
| Power (gross) | 36.5 hp [27.2 kW] |
| Rated RPM | 2000 |
| Compression | 17.3:1 |
| Displacement | 158 ci [2.6 L] |
| Power | 34.3 hp [25.6 kW] |
| Air cleaner | Dual paper elements |
| Bore/Stroke | 4.20x3.80 inches [107 x 97 mm] |
| Starter volts | 12 |
| Torque RPM | 1400 |
| Torque | 101 lb-ft [137.0 Nm] |
Transmission Information of Ford, 2810Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Transmission | Dual Range |
|---|---|
| Oil capacity | 12.7 qts [12.0 L] |
| Gears | 8 forward and 2 reverse |
| Clutch | 330mm dry disc |
Transmission variants 2
| Type | Mechanical shuttle |
|---|---|
| Gears | 6 forward and 4 reverse |
| 8-speed |
| 6-speed mechanical shuttle |
Mechanical Specs of Ford, 2810Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two-post fixed ROPS. |
| Two- or four-wheel drive |
| Differential wet disc brakes |
| Power assist OptOptional | |
| Steering | Manual |
| Final drives | Inboard planetary |
| Differential lock | Mechanical rear |
Power Information of Ford, 2810Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 540 |
| Engine RPM | 540@1800 |
Hydraulics Specifications of Ford, 2810
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Steering cap. | 3.6 qts [3.4 L] |
| Pump flow | 7.7 gpm [29.1 lpm] |
| Capacity | 12.1 gal [45.8 L] |
| Pressure | 2500 psi [172.4 bar] |
Three-Point Hitch of Ford, 2810
Hitch category and rear/front lift capacity.
| Rear Type | I |
|---|---|
| Control | Position and draft control |
| Rear lift | 2936 lbs [1331 kg] |
Electrical System of Ford, 2810
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Mk II Charging amps | 51 |
| Charging system | Alternator |
| Battery AH | 51 |
| Mk I Charging amps | 32 |
Frequently asked questions
How much horsepower does the Ford 2810 have?
The Ford 2810 delivers 34 HP.
What years was the Ford 2810 produced?
The Ford 2810 was produced in 1983-1990.
What engine does the Ford 2810 have?
The Ford 2810 is powered by a Diesel, 3-cylinder engine.
What transmission does the Ford 2810 use?
The Ford 2810 uses a Dual Range transmission.
How much does the Ford 2810 weigh?
The Ford 2810 weighs 4420 lbs [2004 kg].
Is the Ford 2810 4WD?
The Ford 2810 is available in 2WD/4WD.