Introduction
Production Information of Ford, 4430
The production information of the tractor (4430) includes details about its manufacturing.
| The Ford/New Holland 4430 is the same as the Fiat 82-86. |
| Original price was $27,000 in 1998 |
| Orchard/Vineyard tractor |
| Distributor | Ford |
|---|---|
| Manufacturer | Fiat |
Dimension and Tires Information of Ford, 4430
This section sums up the dimension and tires information of the tractor.
| Rear tread | 42 to 57 inches [106 to 144 cm] |
|---|---|
| Wheelbase | 83.1 inches [211 cm] |
| Clearance (front axle) | 15.5 inches [39 cm] |
| Weight | 5290 lbs [2399 kg] |
| Length | 144.5 inches [367 cm] |
| Front tread | 47 to 53 inches [119 to 134 cm] |
| Width | 58.5 inches [148 cm] |
| Standard tires (ag) | Front: 9.5x16. Rear: 14.9x24 |
|---|
Engine Specifications of Ford, 4430
Get the specifications for the engine and if different options are available.
| Fiat 8045.05 |
| Liquid-cooled |
| Diesel |
| 4-cylinder |
| Pre-heating | Thermostart |
|---|---|
| Displacement | 238.5 ci [3.9 L] |
| Rated RPM | 2500 |
| Bore/Stroke | 4.094x4.527 inches [104 x 115 mm] |
| Starter volts | 12 |
Transmission Information of Ford, 4430Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Gear |
|---|---|
| Gears | 12 forward and 4 reverse |
Transmission variants 2
| Type | Shuttle |
|---|---|
| Gears | 12 forward and reverse |
| 12-speed gear |
| 12-speed shuttle |
Mechanical Specs of Ford, 4430Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Mechanical wet disc brakes |
| Power steering |
| Two-post mid-mount ROPS. Cab optional with air-conditioning. |
| Final drives | Inboard planetary |
|---|---|
| Differential lock | Mechanical rear |
Power Information of Ford, 4430Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 540/1000 |
Hydraulics Specifications of Ford, 4430
Hydraulic system type, pressure, pump flow and valves.
| Steering press. | 1450 psi [100.0 bar] |
|---|---|
| Type | Open center |
| Pump flow | 11 gpm [41.6 lpm] |
| Valves | 2 or 3 |
| Capacity | 11.3 gal [42.8 L] |
| Steering flow | 8.1 gpm [30.7 lpm] |
| Pressure | 2740 psi [188.9 bar] |
Three-Point Hitch of Ford, 4430
Hitch category and rear/front lift capacity.
| Rear Type | II |
|---|---|
| Control | Position control and lower-link draft sensing |
| Rear lift | 5931 lbs [2690 kg] |
Electrical System of Ford, 4430
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Cab Charging amps | 65 |
| Charging system | Alternator |
| ROPS Charging amps | 33 |
Frequently asked questions
How much horsepower does the Ford 4430 have?
The Ford 4430 delivers 77 hp[P] HP.
What years was the Ford 4430 produced?
The Ford 4430 was produced in 1992-1998.
What engine does the Ford 4430 have?
The Ford 4430 is powered by a Diesel, 4-cylinder engine.
What transmission does the Ford 4430 use?
The Ford 4430 uses a Gear transmission.
How much does the Ford 4430 weigh?
The Ford 4430 weighs 5290 lbs [2399 kg].
Is the Ford 4430 4WD?
The Ford 4430 is available in 4WD.