Introduction
Production Information of Ford, Commander 6000
The production information of the tractor (Commander 6000) includes details about its manufacturing.
| Row-Crop tractor |
| Built in Highland Park, Michigan, USA |
| Manufacturer | Ford |
|---|
Dimension and Tires Information of Ford, Commander 6000
This section sums up the dimension and tires information of the tractor.
| Rear tread | 56 to 84 inches [142 to 213 cm] |
|---|---|
| Wheelbase | 85 inches [215 cm] |
| Height (hood) | 70 inches [177 cm] |
| Height (steering wheel) | 78.2 inches [198 cm] |
| Length | 142 inches [360 cm] |
| Clearance (front axle) | 19.5 inches [49 cm] |
| Operating weight | 7130 lbs [3234 kg] |
| Width | 71.5 inches [181 cm] |
| Front tread | 56 to 76 inches [142 to 193 cm (row-crop)] |
| Front tread | 56 to 80 inches [142 to 203 cm (all-purpose)] |
| Ballasted weight | 9585 lbs [4347 kg] |
| Standard tires (ag) | Front: 6.00-16. Rear: 13.6-38 (row-crop) |
|---|---|
| Front: 7.50-18. Rear: 15.5-38 (all-purpose) |
Engine Specifications of Ford, Commander 6000
Get the specifications for the engine and if different options are available.
| Ford |
| Liquid-cooled |
| 6-cylinder |
| LP-gas |
| Compression | 8.8:1 |
|---|---|
| Starter | Electric |
| Displacement | 223 ci [3.7 L] |
| Bore/Stroke | 3.62x3.60 inches [92 x 91 mm] |
| Air cleaner | Oil bath |
| Firing order | 1-5-3-6-2-4 |
| Rated RPM | 2430 |
| Coolant capacity | 15.5 qts [14.7 L] |
| Oil capacity | 5 qts [4.7 L] |
| Starter volts | 12 |
Transmission Information of Ford, Commander 6000Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Transmission | Ford Select-O-Speed |
|---|---|
| Oil capacity | 12 qts [11.4 L] |
| Type | Full power shift |
| Gears | 10 forward and 2 reverse |
Mechanical Specs of Ford, Commander 6000Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two-wheel drive |
| Open operator station. |
| Differential hydraulic wet disc brakes |
| Power steering |
| Final drives | Planetary |
|---|
Power Information of Ford, Commander 6000Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| 1000E@1730 | |
| 540@2225 | |
| Rear PTO Type | 540/1000 |
| 1000@2225 | |
| Engine RPM | 540E@1730 |
Hydraulics Specifications of Ford, Commander 6000
Hydraulic system type, pressure, pump flow and valves.
| Capacity | 3.5 gal [13.2 L] |
|---|---|
| Pump flow | 4.5 gpm [17.0 lpm] |
Three-Point Hitch of Ford, Commander 6000
Hitch category and rear/front lift capacity.
| Rear Type | II/I |
|---|---|
| Control | Position and draft control |
Electrical System of Ford, Commander 6000
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Charging system | Generator |
| Charging amps | 20 |
Frequently asked questions
How much horsepower does the Ford Commander 6000 have?
The Ford Commander 6000 delivers 72 hp[P] HP.
What years was the Ford Commander 6000 produced?
The Ford Commander 6000 was produced in 1965-1967.
What engine does the Ford Commander 6000 have?
The Ford Commander 6000 is powered by a LP-gas, 6-cylinder engine.
What transmission does the Ford Commander 6000 use?
The Ford Commander 6000 uses a Ford Select-O-Speed transmission.
How much does the Ford Commander 6000 weigh?
The Ford Commander 6000 weighs 7130 lbs [3234 kg].
Is the Ford Commander 6000 4WD?
The Ford Commander 6000 is available in 2WD.