International Harvester 1056
Power
105 hp
Production
1982-1985
Engine
Diesel, 6-cylinder
Drive
2WD/4WD
From the same series:
Introduction
Production Information of International Harvester, 1056
The production information of the tractor (1056) includes details about its manufacturing.
| Row-Crop tractor |
| Built in Neuss, Germany |
| Manufacturer | International Harvester |
|---|
Dimension and Tires Information of International Harvester, 1056
This section sums up the dimension and tires information of the tractor.
| Clearance (rear axle) | 30.1 inches [76 cm] |
|---|---|
| 2WD Wheelbase | 103.4 inches [262 cm] |
| Width | 91 inches [231 cm] |
| 4WD Length | 167.7 inches [425 cm] |
| 4WD Wheelbase | 101.9 inches [258 cm] |
| 2WD Front tread | 59 to 71 inches [149 to 180 cm] |
| Clearance (front axle) | 20.1 inches [51 cm] |
| 2WD Length | 165 inches [419 cm] |
| Rear tread | 67 to 87 inches [170 to 220 cm] |
| 4WD Front tread | 64 to 75 inches [162 to 190 cm] |
| 2WD Standard tires (ag) | Front: 7.50-18. Rear: 18.4R34 |
|---|
Engine Specifications of International Harvester, 1056
Get the specifications for the engine and if different options are available.
| International Harvester D-358 |
| Liquid-cooled |
| Diesel |
| 6-cylinder |
| Coolant capacity | 25.4 qts [24.0 L] |
|---|---|
| Fuel system | Direct injection |
| Air cleaner | Dry |
| Torque | 267 lb-ft [362.1 Nm] |
| Rated RPM | 2300 |
| Displacement | 358 ci [5.9 L] |
| Power (net) | 105 hp [78.3 kW] |
| Bore/Stroke | 3.875x5.0625 inches [98 x 129 mm] |
| Oil capacity | 12.7 qts [12.0 L] |
| Starter volts | 12 |
| Torque RPM | 1400 |
Transmission Information of International Harvester, 1056Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Gears | 8 forward and 4 reverse |
|---|---|
| Clutch | 310mm dry disc |
Transmission variants 2
| Transmission | IH-Synchron |
|---|---|
| Clutch | 310mm cerametallic disc |
| Type | Two-speed power shift |
| Gears | 16 forward and 8 reverse |
| 8-speed |
| 16-speed two-speed power shift |
Mechanical Specs of International Harvester, 1056Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two- or four-wheel drive |
| Four-post ROPS. Standard cab and deluxe XL cab optional. |
| Power steering |
| Final drives | Planetary |
|---|---|
| Differential lock | Mechanical rear |
Power Information of International Harvester, 1056Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| 1000@2000 | |
| Engine RPM | 540@1920 |
| Clutch | 310mm dry disc |
| Rear PTO Type | 540/1000 |
Hydraulics Specifications of International Harvester, 1056
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Pump flow | 11.1 gpm [42.0 lpm] |
| Capacity | 12.2 gal [46.2 L] |
| Pressure | 2346 psi [161.8 bar] |
Three-Point Hitch of International Harvester, 1056
Hitch category and rear/front lift capacity.
| Rear Type | II |
|---|---|
| 11023 lbsOptOptional [5000 kg] | |
| Control | Position and draft control |
| Rear lift (at ends) | 9171 lbs [4159 kg] |
Electrical System of International Harvester, 1056
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery AH | 143 |
| Battery volts | 12 |
| Charging system | Alternator |
| Charging amps | 55 |
Frequently asked questions
How much horsepower does the International Harvester 1056 have?
The International Harvester 1056 delivers 105 HP.
What years was the International Harvester 1056 produced?
The International Harvester 1056 was produced in 1982-1985.
What engine does the International Harvester 1056 have?
The International Harvester 1056 is powered by a Diesel, 6-cylinder engine.
Is the International Harvester 1056 4WD?
The International Harvester 1056 is available in 2WD/4WD.