International Harvester 1066 tractor

International Harvester 1066

Power

140 hp[P] hp

Production

1971-1976

Engine

Turbocharged diesel, 6-cylinder

Transmission

Gear

Drive

2WD/4WD

From the same series:

Hydro 100
1466

Introduction

Production Information of International Harvester, 1066

The production information of the tractor (1066) includes details about its manufacturing.

Original price was $21,100 in 1976
Row-Crop tractor
The hydrostatic drive 1066 Hydro was later renamed the Hydro 100. This was due to confusion over drawbar horsepower. The hydrostatic drive took a lot of power to operate, and the 1066 Hydro had much less power than a gear-driven 1066. Torque Amplifer (TA) was optional. The 1066 engine was altered in 1973 to increase horsepower.
Built in Rock Island, Illinois, USA
ManufacturerInternational Harvester
Total built54,947

Dimension and Tires Information of International Harvester, 1066

This section sums up the dimension and tires information of the tractor.

Wheelbase105 inches [266 cm]
Clearance (drawbar)16 inches [40 cm]
Height (exhaust)111 inches [281 cm]
Length165 inches [419 cm]
Bar rear axle3.25 inch diameter [82 mm]
Width98 inches [248 cm]
Ag front11L-15
Ag rear18.4-38

Engine Specifications of International Harvester, 1066

Get the specifications for the engine and if different options are available.

International Harvester DT414
Liquid-cooled
Turbocharged diesel
6-cylinder
Oil capacity18 qts [17.0 L]
Displacement414 ci [6.8 L]
Rated RPM2400
Bore/Stroke4.30x4.75 inches [109 x 121 mm]
Coolant capacity25 qts [23.7 L]
Starter volts12
2600 (after 1973)
Air cleanerDual stage dry

Transmission Information of International Harvester, 1066Y

Discover all variants of transmission available for this tractor model.

Transmission variants 1

Four gears each in high, low, and reverse ranges.
TypeGear
Gears8 forward and 4 reverse
ClutchDry disc

Transmission variants 2

Four gears (1-4) in two ranges (Low/High) with the two-speed Torque Amplifier power shift (TA/direct).
TransmissionTorque Amplifier
ClutchDry disc
TypeTwo-speed power shift
Gears16 forward and 8 reverse

Transmission variants 3

TypeHydrostatic
GearsInfinite forward and reverse (two-range)
8-speed gear
16-speed two-speed power shift
Hydrostatic

Mechanical Specs of International Harvester, 1066Y

This section summarizes all mechanical information such as the brake system and other specifications.

Two- or four-wheel drive
Open operator station. Two-post fixed ROPS available. Cab available with optional air-conditioning.
Power steering
Hydraulic dry disc brakes

Power Information of International Harvester, 1066Y

Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.

Rear PTOIndependent
Rear PTO Type540/1000

Hydraulics Specifications of International Harvester, 1066

Hydraulic system type, pressure, pump flow and valves.

TypeOpen center
Steering flow9 gpm [34.1 lpm]
Pump flow12 gpm [45.4 lpm]
Total flow21 gpm [79.5 lpm]

Three-Point Hitch of International Harvester, 1066

Hitch category and rear/front lift capacity.

Rear TypeIII/II
Rear lift (at 24"/610mm)5600 lbs [2540 kg]

Frequently asked questions

How much horsepower does the International Harvester 1066 have?

The International Harvester 1066 delivers 140 hp[P] HP.

What years was the International Harvester 1066 produced?

The International Harvester 1066 was produced in 1971-1976.

What engine does the International Harvester 1066 have?

The International Harvester 1066 is powered by a Turbocharged diesel, 6-cylinder engine.

What transmission does the International Harvester 1066 use?

The International Harvester 1066 uses a Gear transmission.

Is the International Harvester 1066 4WD?

The International Harvester 1066 is available in 2WD/4WD.

Compare the International Harvester 1066 with another model